Test Report (DTS) rev.pdf

FCC ID: JNZMR0069

Test Report

Download: PDF
FCCID_3397268

FCC Test Report (BT-LE) Report No.: RF170421E11-1 FCC ID: JNZMR0069 Test Model: M-R0069 Received Date: Apr. 23, 2017 Test Date: Apr. 24 to 28, 2017 Issued Date: May 05, 2017 Applicant: LOGITECH FAR EAST LTD. Address: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location (1): E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF170421E11-1 Page No. 1 / 32 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT (BT-LE) ................................................................................................... 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal .................................................................................................................. 10 3.4 Description of Support Units .............................................................................................................. 11 3.4.1 Configuration of System under Test ................................................................................................... 11 3.5 General Description of Applied Standards ........................................................................................ 12 4 Test Types and Results ...................................................................................................................... 13 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 13 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 13 4.1.2 Test Instruments ................................................................................................................................ 14 4.1.3 Test Procedures ................................................................................................................................. 16 4.1.4 Deviation from Test Standard ............................................................................................................ 17 4.1.5 Test Setup .......................................................................................................................................... 17 4.1.6 EUT Operating Conditions................................................................................................................. 18 4.1.7 Test Results ....................................................................................................................................... 19 4.2 6dB Bandwidth Measurement ........................................................................................................... 23 4.2.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 23 4.2.2 Test Setup .......................................................................................................................................... 23 4.2.3 Test Instruments ................................................................................................................................ 23 4.2.4 Test Procedure .................................................................................................................................. 23 4.2.5 Deviation fromTest Standard ............................................................................................................. 23 4.2.6 EUT Operating Conditions................................................................................................................. 23 4.2.7 Test Result ......................................................................................................................................... 24 4.3 Conducted Output Power Measurement ........................................................................................... 25 4.3.1 Limits of Conducted Output Power Measurement ............................................................................ 25 4.3.2 Test Setup .......................................................................................................................................... 25 4.3.3 Test Instruments ................................................................................................................................ 25 4.3.4 Test Procedures ................................................................................................................................. 25 4.3.5 Deviation from Test Standard ............................................................................................................ 25 4.3.6 EUT Operating Conditions................................................................................................................. 25 4.3.7 Test Results ....................................................................................................................................... 26 4.4 Power Spectral Density Measurement .............................................................................................. 27 4.4.1 Limits of Power Spectral Density Measurement ............................................................................... 27 4.4.2 Test Setup .......................................................................................................................................... 27 4.4.3 Test Instruments ................................................................................................................................ 27 4.4.4 Test Procedure .................................................................................................................................. 27 4.4.5 Deviation from Test Standard ............................................................................................................ 27 4.4.6 EUT Operating Condition .................................................................................................................. 27 4.4.7 Test Results ....................................................................................................................................... 28 4.5 Conducted Out of Band Emission Measurement .............................................................................. 29 4.5.1 Limits of Conducted Out of Band Emission Measurement................................................................ 29 4.5.2 Test Setup .......................................................................................................................................... 29 4.5.3 Test Instruments ................................................................................................................................ 29 4.5.4 Test Procedure .................................................................................................................................. 29 4.5.5 Deviation from Test Standard ............................................................................................................ 29 4.5.6 EUT Operating Condition .................................................................................................................. 29 Report No.: RF170421E11-1 Page No. 2 / 32 Report Format Version: 6.1.1

4.5.7 Test Results ....................................................................................................................................... 30 5 Pictures of Test Arrangements .......................................................................................................... 31 Appendix – Information on the Testing Laboratories ................................................................................ 32 Report No.: RF170421E11-1 Page No. 3 / 32 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF170421E11-1 Original release. May 05, 2017 Report No.: RF170421E11-1 Page No. 4 / 32 Report Format Version: 6.1.1

1 Certificate of Conformity Product: 2.4GHz Cordless Mouse Brand: Logitech Test Model: M-R0069 Sample Status: ENGINEERING SAMPLE Applicant: LOGITECH FAR EAST LTD. Test Date: Apr. 24 to 28, 2017 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: May 05, 2017 Claire Kuan / Specialist Approved by : , Date: May 05, 2017 May Chen / Manager Report No.: RF170421E11-1 Page No. 5 / 32 Report Format Version: 6.1.1

Eooert venitas 2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (SECTION 15.247) C'I:;ze Test Item Result Remarks 15.207 AC Power Conducted Emission NA Without AC power port of the EUT. 15.205&avo RadatedEmjosions & Band E40® " pagg. Mmumpessingmarainto840B al 2483.50MHz. 15.247(d) Antenna Port Emission PASS Meet the requirement of limit. 15.247(a)(2) 60B bandwidth PASS Meet the requirement of limit. 15.247(b) Conducted power PASS Meet the requirement of limit. 15.247(e) Power Spectral Density PASS Meet the requirement of limit. 15.203 Antenna Requirement PASS No antenna connector is used. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16—4—2: Measurement Frequency EXpand(ESZl)Jr(]f rtainty Radiated Emissions up to 1 GHz 30MHz ~ 1GHz 5.32 dB 1GHz ~ 6GHz 4.82 dB Radiated Emissions above 1 GHz 6GHz ~ 18GHz 4.58 dB 18GHz ~ 40GHz 5.03 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF170421E11—1 Page No. 6 / 32 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT (BT-LE) Product 2.4GHz Cordless Mouse Brand Logitech PMN G603 Test Model M-R0069 Status of EUT ENGINEERING SAMPLE Power Supply Rating DC 1.5V from battery Modulation Type GFSK Transfer Rate Up to 1Mbps Operating Frequency 2402MHz ~ 2480MHz Number of Channel 40 Output Power 3.006mW Antenna Type PIFA antenna (Antenna gain: -1.33 dBi) Antenna Connector NA Accessory Device NA Data Cable Supplied NA Note: 1. The EUT may have a lot of colors for marketing requirement. 2. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF170421E11-1 Page No. 7 / 32 Report Format Version: 6.1.1

3.2 Description of Test Modes 40 channels are provided to this EUT: FREQ. FREQ. FREQ. FREQ. CHANNEL CHANNEL CHANNEL CHANNEL (MHz) (MHz) (MHz) (MHz) 0 2402 10 2422 20 2442 30 2462 1 2404 11 2424 21 2444 31 2464 2 2406 12 2426 22 2446 32 2466 3 2408 13 2428 23 2448 33 2468 4 2410 14 2430 24 2450 34 2470 5 2412 15 2432 25 2452 35 2472 6 2414 16 2434 26 2454 36 2474 7 2416 17 2436 27 2456 37 2476 8 2418 18 2438 28 2458 38 2478 9 2420 19 2440 29 2460 39 2480 Report No.: RF170421E11-1 Page No. 8 / 32 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE1G RE<1G PLC APCM - √ √ - √ - Where RE1G: Radiated Emission above 1GHz RE<1G: Radiated Emission below 1GHz PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement NOTE: No need to concern of Power Line Conducted Emission due to the EUT is powered by battery. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE DATA RATE (Mbps) 0 to 39 0, 19, 39 GFSK 1 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE DATA RATE (Mbps) 0 to 39 19 GFSK 1 Antenna Port Conducted Measurement: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE DATA RATE (Mbps) 0 to 39 0, 19, 39 GFSK 1 Test Condition: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY RE1G 23deg. C, 70%RH DC 1.5V Rey Chen RE<1G 25deg. C, 69%RH DC 1.5V Rey Chen APCM 23deg. C, 66%RH DC 1.5V Anderson Chen Report No.: RF170421E11-1 Page No. 9 / 32 Report Format Version: 6.1.1

3.3 Duty Cycle of Test Signal Duty cycle of test signal is < 98 %, duty factor shall be considered. Duty cycle = 0.162 ms/7.218 ms = 0.022, Duty factor = 10 * log(7.218/0.162) = -16.49 Report No.: RF170421E11-1 Page No. 10 / 32 Report Format Version: 6.1.1

uces venitas 34 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. ECC ID Remarks A. Battery Duracell AA NA NA Provided by Lab 3.4.1 Configuration of System under Test EUT (A) Battery Report No.: RF170421E11—1 Page No. 11 / 32 Report Format Version: 6.1.1

3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) KDB 558074 D01 DTS Meas Guidance v04 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF170421E11-1 Page No. 12 / 32 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF170421E11-1 Page No. 13 / 32 Report Format Version: 6.1.1

4.1.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY50010156 Aug. 18, 2016 Aug. 17, 2017 Agilent (*) Pre-Amplifier EMC001340 980142 Jan. 20, 2016 Jan. 19, 2018 EMCI (*) Loop Antenna EM-6879 264 Dec. 16, 2016 Dec. 15, 2018 Electro-Metrics LOOPCAB-001 RF Cable NA Jan. 17, 2017 Jan. 16, 2018 LOOPCAB-002 Pre-Amplifier ZFL-1000VH2B AMP-ZFL-05 May 07, 2016 May 06, 2017 Mini-Circuits Trilog Broadband Antenna VULB 9168 9168-361 Dec. 29, 2016 Dec. 28, 2017 SCHWARZBECK 966-3-1 RF Cable 8D 966-3-2 Apr. 01, 2017 Mar. 31, 2018 966-3-3 Fixed attenuator UNAT-5+ PAD-3m-3-01 Oct. 05, 2016 Oct. 04, 2017 Mini-Circuits Horn_Antenna BBHA9120-D 9120D-406 Dec. 28, 2016 Dec. 27, 2017 SCHWARZBECK Pre-Amplifier EMC12630SE 980384 Feb. 02, 2017 Feb. 01, 2018 EMCI EMC104-SM-SM-1200 160922 Feb. 02, 2017 Feb. 01, 2018 RF Cable EMC104-SM-SM-2000 150317 Mar. 29, 2017 Mar. 28, 2018 EMC104-SM-SM-5000 150322 Mar. 29, 2017 Mar. 28, 2018 Spectrum Analyzer N9030A MY54490520 July 29, 2016 July 28, 2017 Keysight Pre-Amplifier EMC184045SE 980386 Feb. 02, 2017 Feb. 01, 2018 EMCI Horn_Antenna BBHA 9170 BBHA9170608 Dec. 15, 2016 Dec. 14, 2017 SCHWARZBECK 36432/2 RF Cable SUCOFLEX 102 Jan. 15, 2017 Jan. 14, 2018 36433/2 Software ADT_Radiated_V8.7.08 NA NA NA Antenna Tower & Turn Table MF-7802 MF780208406 NA NA Max-Full Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA Spectrum Analyzer FSv40 100964 June 28, 2016 June 27, 2017 R&S Spectrum Analyzer E4446A MY48250253 Dec. 21, 2016 Dec. 20, 2017 Agilent Power meter ML2495A 1014008 May 05, 2016 May 04, 2017 Anritsu Power sensor MA2411B 0917122 May 05, 2016 May 04, 2017 Anritsu Report No.: RF170421E11-1 Page No. 14 / 32 Report Format Version: 6.1.1

Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. *The calibration interval of the above test instruments is 24 months and the calibrations are traceable to NML/ROC and NIST/USA. 3. The test was performed in 966 Chamber No. 3. 4. The FCC Site Registration No. is 147459 5. The CANADA Site Registration No. is 20331-1 6. Tested Date: Apr. 24 to 28, 2017 Report No.: RF170421E11-1 Page No. 15 / 32 Report Format Version: 6.1.1

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Both X and Y axes of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Average detection (AV) at frequency above 1GHz. If duty cycle of test signal is < 98%, the duty factor need added to measured value. 4. All modes of operation were investigated and the worst-case emissions are reported. Report No.: RF170421E11-1 Page No. 16 / 32 Report Format Version: 6.1.1

4.1.4 Deviation from Test Standard No deviation. 4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable EUT& 3m 10m Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF170421E11-1 Page No. 17 / 32 Report Format Version: 6.1.1

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Contorlling software (RF Sample [Number Lock]) has been activated to set the EUT on specific status. Report No.: RF170421E11-1 Page No. 18 / 32 Report Format Version: 6.1.1

Eooert venitas 4.1.7 Test Results Above 1GHz Data : CHANNEL TX Channel 0 DETECTOR Peak (PK) FREQUENCY RANGE |1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW |CORRECTION NO. '(:;53 LEVEL (dléll':nvl;rm) M’(\::;IN HEIGHT ANGLE VALUE FACTOR (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2890.00 59.8 PK 74.0 20.2 1.38 H 360 55.4 41.6 2 2390.00 44.3 AV 54.0 —9.7 1.38 H 360 45.9 1.6 3 *2402.00 95.0 PK 1.38 H 360 96.5 1.5 4 *2402.00 93.4 AV 1.38 H 360 94.9 41.5 5 4804.00 39.2 PK 74.0 —84.8 1.32H 264 36.2 3.0 6 4804.00 38.1 AV 54.0 —20.9 1.32H 264 30.1 3.0 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW |CORRECTION NO. '(:;53 LEVEL (dléll':nvl;rm) M’(\::;IN HEIGHT ANGLE VALUE FACTOR (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 54.9 PK 74.0 191 3.99 V 214 56.5 1.6 2 2390.00 45.3 AV 54.0 —8.7 3.99 V 214 46.9 1.6 3 *2402.00 90.2 PK 3.99 V 214 91.7 41.5 4 *2402.00 88.9 AV s.99 V 214 90.4 41.5 5 4804.00 38.3 PK 74.0 —85.7 248 V 301 35.8 3.0 6 4804.00 $2.0 AV 54.0 22.0 248 V 301 29.0 3.0 REMARKS: 1. Emission Level(dBuV/m)= Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m)= Antenna Factor(dB/m) + Cable Factor(dB) — Pre—Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level — Limit value 5. " * ": Fundamental frequency. Report No.: RF170421E11—1 Page No. 19 / 32 Report Format Version: 6.1.1

CHANNEL TX Channel 19 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 98.0 PK 1.43 H 301 99.5 -1.5 2 *2440.00 97.4 AV 1.43 H 301 98.9 -1.5 3 4880.00 41.0 PK 74.0 -33.0 2.79 H 266 37.8 3.2 4 4880.00 35.7 AV 54.0 -18.3 2.79 H 266 32.5 3.2 5 7320.00 42.7 PK 74.0 -31.3 1.39 H 202 33.8 8.9 6 7320.00 34.3 AV 54.0 -19.7 1.39 H 202 25.4 8.9 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 93.2 PK 2.14 V 178 94.7 -1.5 2 *2440.00 92.5 AV 2.14 V 178 94.0 -1.5 3 4880.00 40.3 PK 74.0 -33.7 2.59 V 300 37.1 3.2 4 4880.00 33.8 AV 54.0 -20.2 2.59 V 300 30.6 3.2 5 7320.00 42.7 PK 74.0 -31.3 1.75 V 214 33.8 8.9 6 7320.00 35.6 AV 54.0 -18.4 1.75 V 214 26.7 8.9 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF170421E11-1 Page No. 20 / 32 Report Format Version: 6.1.1

CHANNEL TX Channel 39 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 101.7 PK 1.22 H 167 103.1 -1.4 2 *2480.00 100.1 AV 1.22 H 167 101.5 -1.4 3 2483.50 59.1 PK 74.0 -14.9 1.22 H 167 60.5 -1.4 4 2483.50 44.5 AV 54.0 -9.5 1.22 H 167 45.9 -1.4 5 4960.00 41.1 PK 74.0 -32.9 2.85 H 253 37.9 3.2 6 4960.00 35.8 AV 54.0 -18.2 2.85 H 253 32.6 3.2 7 7440.00 43.1 PK 74.0 -30.9 1.37 H 209 33.9 9.2 8 7440.00 34.6 AV 54.0 -19.4 1.37 H 209 25.4 9.2 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 96.9 PK 2.09 V 177 98.3 -1.4 2 *2480.00 95.2 AV 2.09 V 177 96.6 -1.4 3 2483.50 60.3 PK 74.0 -13.7 2.09 V 177 61.7 -1.4 4 2483.50 45.6 AV 54.0 -8.4 2.09 V 177 47.0 -1.4 5 4960.00 40.5 PK 74.0 -33.5 2.58 V 291 37.3 3.2 6 4960.00 33.9 AV 54.0 -20.1 2.58 V 291 30.7 3.2 7 7440.00 42.1 PK 74.0 -31.9 1.79 V 200 32.9 9.2 8 7440.00 35.1 AV 54.0 -18.9 1.79 V 200 25.9 9.2 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF170421E11-1 Page No. 21 / 32 Report Format Version: 6.1.1

Below 1GHz Data: CHANNEL TX Channel 19 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 30.07 25.1 QP 40.0 -14.9 1.00 H 137 34.7 -9.6 2 196.21 21.8 QP 43.5 -21.7 2.00 H 352 33.0 -11.2 3 228.10 20.1 QP 46.0 -25.9 1.00 H 48 30.9 -10.8 4 348.98 23.0 QP 46.0 -23.0 2.00 H 134 29.3 -6.3 5 644.62 28.3 QP 46.0 -17.7 1.00 H 86 28.0 0.3 6 910.37 31.4 QP 46.0 -14.6 3.00 H 75 27.1 4.3 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 50.22 23.1 QP 40.0 -16.9 1.00 V 196 31.6 -8.5 2 150.01 21.0 QP 43.5 -22.5 1.00 V 95 29.3 -8.3 3 430.88 24.0 QP 46.0 -22.0 2.00 V 48 27.9 -3.9 4 644.37 28.1 QP 46.0 -17.9 3.00 V 32 27.8 0.3 5 774.74 29.6 QP 46.0 -16.4 1.00 V 223 27.4 2.2 6 971.07 32.5 QP 54.0 -21.5 2.00 V 121 27.5 5.0 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF170421E11-1 Page No. 22 / 32 Report Format Version: 6.1.1

4.2 6dB Bandwidth Measurement 4.2.1 Limits of 6dB Bandwidth Measurement The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.2.2 Test Setup Spectrum EUT Attenuator Analyzer 4.2.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.2.4 Test Procedure a. Set resolution bandwidth (RBW) = 100kHz b. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = Peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.2.5 Deviation fromTest Standard No deviation. 4.2.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF170421E11-1 Page No. 23 / 32 Report Format Version: 6.1.1

4.2.7 Test Result 6dB Bandwidth Minimum Limit Channel Frequency (MHz) Pass / Fail (MHz) (MHz) 0 2402 0.69 0.5 Pass 19 2440 0.70 0.5 Pass 39 2480 0.71 0.5 Pass Spectrum Plot of Worst Value CH 0 Report No.: RF170421E11-1 Page No. 24 / 32 Report Format Version: 6.1.1

4.3 Conducted Output Power Measurement 4.3.1 Limits of Conducted Output Power Measurement For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30dBm) 4.3.2 Test Setup EUT Power Sensor Power Meter Attenuator 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedures A peak / average power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak / average power sensor. Record the power level. 4.3.5 Deviation from Test Standard No deviation. 4.3.6 EUT Operating Conditions Same as Item 4.2.6. Report No.: RF170421E11-1 Page No. 25 / 32 Report Format Version: 6.1.1

4.3.7 Test Results FOR PEAK POWER Peak Power Peak Power Channel Frequency (MHz) Limit (dBm) Pass/Fail (mW) (dBm) 0 2402 1.146 0.59 30 Pass 19 2440 3.006 4.78 30 Pass 39 2480 2.965 4.72 30 Pass FOR AVERAGE POWER Frequency Average Power Average Power Channel (MHz) (mW) (dBm) 0 2402 1.13 0.53 19 2440 2.985 4.75 39 2480 2.938 4.68 Report No.: RF170421E11-1 Page No. 26 / 32 Report Format Version: 6.1.1

Eooert venitas 4.4 Power Spectral Density Measurement 4.4.1 Limits of Power Spectral Density Measurement The Maximum of Power Spectral Density Measurement is 8dBm. 4.4.2 Test Setup EUT | Spectrum Attenuator Analyzer 4.4.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4. 4.4 Test Procedure a. Set analyzer center frequency to DTS channel center frequency. b. Set the span to 1.5 times the DTS bandwidth. c. Set the RBW to: 3 kHz < RBW s 100 kHz. d. Set the VBW > 3 x RBW. e. Detector = peak. f. Sweep time = auto couple. g. Trace mode = max hold. h. Allow trace to fully stabilize. i. Use the peak marker function to determine the maximum amplitude level within the RBW. 4.4.5 Deviation from Test Standard No deviation. 4.4.6 EUT Operating Condition Same as Item 4.2.6 Report No.: RF170421E11—1 Page No. 27 / 32 Report Format Version: 6.1.1

4.4.7 Test Results Freq. PSD Limit Pass Channel (MHz) (dBm/3kHz) (dBm/3kHz) /Fail 0 2402 -15.37 8 Pass 19 2440 -10.20 8 Pass 39 2480 -10.26 8 Pass Spectrum Plot of Worst Value CH19 Report No.: RF170421E11-1 Page No. 28 / 32 Report Format Version: 6.1.1

4.5 Conducted Out of Band Emission Measurement 4.5.1 Limits of Conducted Out of Band Emission Measurement Below –20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.5.2 Test Setup EUT Spectrum Analyzer Attenuator 4.5.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.5.4 Test Procedure MEASUREMENT PROCEDURE REF 1. Set the RBW = 100 kHz. 2. Set the VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE 1. Set RBW = 100 kHz. 2. Set VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep = auto couple. 5. Trace Mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum amplitude level. 4.5.5 Deviation from Test Standard No deviation. 4.5.6 EUT Operating Condition Same as Item 4.2.6 Report No.: RF170421E11-1 Page No. 29 / 32 Report Format Version: 6.1.1

4.5.7 Test Results CH 0 CH 19 CH 39 CH 0 Band edge CH 39 Band edge Report No.: RF170421E11-1 Page No. 30 / 32 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF170421E11-1 Page No. 31 / 32 Report Format Version: 6.1.1

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF170421E11-1 Page No. 32 / 32 Report Format Version: 6.1.1


Document Created: 2017-10-24 14:45:30
Document Modified: 2017-10-24 14:45:30
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC