Test Report

FCC ID: JNZCU0010

Test Report

Download: PDF
FCCID_1772964

FCC TEST REPORT REPORT NO.: RF120806E02 MODEL NO.: C-U0010 FCC ID: JNZCU0010 RECEIVED: Aug. 06, 2012 TESTED: Aug. 08 to 09, 2012 ISSUED: Aug. 17, 2012 APPLICANT: LOGITECH FAR EAST LTD. ADDRESS: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF120806E02 1 of 26 Report Format Version 5.0.0

Table of Contents RELEASE CONTROL RECORD .............................................................................................................. 3 1. CERTIFICATION ......................................................................................................................... 4 2. SUMMARY OF TEST RESULTS ................................................................................................. 5 2.1 MEASUREMENT UNCERTAINTY .............................................................................................. 5 3. GENERAL INFORMATION ......................................................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT............................................................................................ 6 3.2 DESCRIPTION OF TEST MODES.............................................................................................. 7 3.3 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................................. 7 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................ 9 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST......................................................................... 9 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS........................................................... 10 4. TEST TYPES AND RESULTS ....................................................................................................11 4.1 CONDUCTED EMISSION MEASUREMENT ............................................................................. 11 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................................... 11 4.1.2 TEST INSTRUMENTS ............................................................................................................... 11 4.1.3 TEST PROCEDURES ............................................................................................................... 12 4.1.4 TEST SETUP ............................................................................................................................ 12 4.1.5 EUT OPERATING CONDITIONS .............................................................................................. 13 4.1.6 TEST RESULTS ........................................................................................................................ 14 4.2 RADIATED EMISSION AND BAND EDGE MEASUREMENT .................................................. 16 4.2.1 LIMITS OF RADIATED EMISSION AND BAND EDGE MEASUREMENT ............................... 16 4.2.2 TEST INSTRUMENTS .............................................................................................................. 17 4.2.3 TEST PROCEDURES ............................................................................................................... 18 4.2.4 DEVIATION FROM TEST STANDARD ..................................................................................... 18 4.2.5 TEST SETUP ............................................................................................................................ 19 4.2.6 EUT OPERATING CONDITIONS .............................................................................................. 19 4.2.7 TEST RESULTS ........................................................................................................................ 20 5. PHOTOGRAPHS OF THE TEST CONFIGURATION ............................................................... 24 6. INFORMATION ON THE TESTING LABORATORIES.............................................................. 25 7. APPENDIX A – MODIFICATION RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ...................................................................................................................... 26 Report No.: RF120806E02 2 of 26 Report Format Version 5.0.0

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF120806E02 Original release Aug. 17, 2012 Report No.: RF120806E02 3 of 26 Report Format Version 5.0.0

1. CERTIFICATION PRODUCT : 2.4GHz Transceiver BRAND NAME : Logitech MODEL NO. : C-U0010 TEST SAMPLE : ENGINEERING SAMPLE APPLICANT : LOGITECH FAR EAST LTD. TESTED : Aug. 08, 2012 STANDARDS : FCC Part 15, Subpart C (Section 15.249) ANSI C63.10-2009 The above equipment (Model: C-U0010) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Aug. 17, 2012 ( Claire Kuan, Specialist ) APPROVED BY : , DATE: Aug. 17, 2012 ( May Chen, Deputy Manager ) Report No.: RF120806E02 4 of 26 Report Format Version 5.0.0

2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C (Section 15.249) STANDARD TEST TYPE RESULT REMARK PARAGRAPH Meet the requirement of limit. 15.207 Conducted Emission Test PASS Minimum passing margin is -11.67dB at 0.19687MHz Radiated Emission Test 15.209 Band Edge Measurement Meet the requirement of limit. 15.249 Limit: 50dB less than the peak value of PASS Minimum passing margin is 15.249 (d) fundamental frequency or meet radiated -3.1dB at 2405.00MHz emission limit in section 15.209 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Value Conducted emissions 2.98 dB Radiated emissions (30MHz-1GHz) 5.69 dB Radiated emissions (1GHz -6GHz) 3.84 dB Radiated emissions (6GHz -18GHz) 4.09 dB Radiated emissions (18GHz -40GHz) 4.24 dB Report No.: RF120806E02 5 of 26 Report Format Version 5.0.0

3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT 2.4GHz Transceiver MODEL NO. C-U0010 POWER SUPPLY DC 5V from host equipment MODULATION TYPE GFSK CARRIER FREQUENCY 2405MHz ~ 2474MHz OF EACH CHANNEL NUMBER OF CHANNEL 24 ANTENNA TYPE PCB printed antenna (Gain: -0.45dBi) DATA CABLE NA I/O PORTS NA ASSOCIATED DEVICES NA NOTE: 1. The EUT operates in the 2.4GHz frequency spectrum and complies with GFSK techniques. 2. The above EUT information was declared by the manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF120806E02 6 of 26 Report Format Version 5.0.0

3.2 DESCRIPTION OF TEST MODES Twelve channels are provided in this EUT. Freq. Freq. Freq. Freq. Channel Channel Channel Channel (MHz) (MHz) (MHz) (MHz) 1 2405 7 2423 13 2441 19 2459 2 2408 8 2426 14 2444 20 2462 3 2411 9 2429 15 2447 21 2465 4 2414 10 2432 16 2450 22 2468 5 2417 11 2435 17 2453 23 2471 6 2420 12 2438 18 2456 24 2474 3.3 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE PLC RE<1G RE≥1G - √ √ √ - Where PLC: Power Line Conducted Emission RE<1G: Radiated Emission below 1GHz RE≥1G: Radiated Emission above 1GHz POWER LINE CONDUCTED EMISSION TEST: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations axis and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE 1 to 24 1 GFSK RADIATED EMISSION TEST (BELOW 1 GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations axis and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE 1 to 24 1 GFSK Report No.: RF120806E02 7 of 26 Report Format Version 5.0.0

RADIATED EMISSION TEST (ABOVE 1 GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations axis and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE 1 to 24 1, 14, 24 GFSK TEST CONDITION: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER(SYSTEM) TESTED BY PLC 25deg. C, 65%RH 120Vac, 60Hz Kyle Huang RE<1G 26deg. C, 69%RH 120Vac, 60Hz Robert Cheng RE≥1G 26deg. C, 68%RH 120Vac, 60Hz Robert Cheng Report No.: RF120806E02 8 of 26 Report Format Version 5.0.0

3.4 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID NOTEBOOK 1 DELL PP32LA GSLB32S FCC DoC COMPUTER 2 iPod shuffle Apple MC749TA/A CC4DMFJUDFDM NA NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1 NA 2 USB cable, 0.1m NOTE: All power cords of the above support units are non shielded (1.8m). 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST 1 NOTEBOOK 2. iPod shuffle EUT COMPUTER TEST TABLE Report No.: RF120806E02 9 of 26 Report Format Version 5.0.0

3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (Section 15.249) ANSI C63.10-2009 All test items have been performed and recorded as per the above standards. NOTE: The EUT is also considered as a kind of computer peripheral, because the connection to computer is necessary for typical use. It has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF120806E02 10 of 26 Report Format Version 5.0.0

4. TEST TYPES AND RESULTS 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) CONDUCTED LIMIT (dBµV) Quasi-peak Average 0.15 ~ 0.5 66 to 56 56 to 46 0.5 ~ 5 56 46 5 ~ 30 60 50 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.1.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver ESCS 30 100287 Feb. 29, 2012 Feb. 28, 2013 ROHDE & SCHWARZ Line-Impedance Stabilization Network NSLK 8127 8127-523 Sep. 20, 2011 Sep. 19, 2012 (for EUT) SCHWARZBECK Line-Impedance Stabilization Network ESH3-Z5 848773/004 Nov. 01, 2011 Oct. 31, 2012 (for Peripheral) ROHDE & SCHWARZ RF Cable 5DFB COACAB-002 Aug. 05, 2012 Aug. 04, 2013 (JYEBAO) 50 ohms Terminator 50 4 Nov. 12, 2011 Nov. 11, 2012 BV Software ADT_Cond_V7.3.7 NA NA NA ADT .3 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. A. 3 The VCCI Con A Registration No. is C-817. 4. Tested Date: Aug. 09, 2012 Report No.: RF120806E02 11 of 26 Report Format Version 5.0.0

4.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. 4.1.4 TEST SETUP Ve r tic a l G ro u n d R e fe r e n c e P la n e Te s t R e c e iv e r EUT 40cm 80cm L IS N H o r iz o n ta l G ro u n d R e fe r e n c e P la n e N o te : 1 .S u p p o rt u n its w e r e c o n n e c te d t o s e c o n d L IS N . 2 .B o th o f L IS N s ( A M N ) a r e 8 0 c m fr o m E U T a n d a t le a s t 8 0 fr o m o th e r u n its a n d o th e r m e ta l p la n e s For the actual test configuration, please refer to the attached file (Test Setup Photo). Report No.: RF120806E02 12 of 26 Report Format Version 5.0.0

4.1.5 EUT OPERATING CONDITIONS 1. Plug the EUT into support unit 1 (Notebook computer) and which placed on a testing table. 2. The support unit 1 (Notebook Computer) runs “Button function” to enable EUT under transmission/receiving condition continuously at specific channel frequency. 3. The support unit 1 (Notebook Computer) runs test program “Button Function” to enable EUT under transmission/receiving condition continuously at specific channel frequency. Report No.: RF120806E02 13 of 26 Report Format Version 5.0.0

4.1.6 TEST RESULTS PHASE Line (L) 6dB BANDWIDTH 9 kHz Reading Emission Freq. Corr. Limit Margin Value Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.19687 0.06 39.70 38.20 39.76 38.26 63.74 53.74 -23.98 -15.48 2 0.39219 0.07 33.30 32.42 33.37 32.49 58.02 48.02 -24.65 -15.53 3 0.84922 0.11 30.69 29.32 30.80 29.43 56.00 46.00 -25.20 -16.57 4 1.56641 0.16 28.93 26.67 29.09 26.83 56.00 46.00 -26.91 -19.17 5 7.28125 0.34 27.20 11.97 27.54 12.31 60.00 50.00 -32.46 -37.69 6 15.50781 0.53 28.72 16.23 29.25 16.76 60.00 50.00 -30.75 -33.24 REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF120806E02 14 of 26 Report Format Version 5.0.0

PHASE Neutral (N) 6dB BANDWIDTH 9 kHz Reading Emission Freq. Corr. Limit Margin Value Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.19687 0.07 42.71 42.00 42.78 42.07 63.74 53.74 -20.96 -11.67 2 0.32578 0.08 33.99 33.09 34.07 33.17 59.56 49.56 -25.49 -16.39 3 0.48203 0.09 27.90 21.77 27.99 21.86 56.30 46.30 -28.32 -24.45 4 0.84922 0.11 24.88 23.38 24.99 23.49 56.00 46.00 -31.01 -22.51 5 7.26172 0.32 27.26 15.91 27.58 16.23 60.00 50.00 -32.42 -33.77 6 15.96875 0.52 29.29 16.00 29.81 16.52 60.00 50.00 -30.19 -33.48 REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF120806E02 15 of 26 Report Format Version 5.0.0

4.2 RADIATED EMISSION AND BAND EDGE MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION AND BAND EDGE MEASUREMENT The field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following Field Strength of Field Strength of Fundamental Fundamental Harmonics Frequency (millivolts/meter) (microvolts/meter) 902 ~ 928 MHz 50 500 2400 ~ 2483.5 MHz 50 500 5725 ~ 5875 MHz 50 500 24 ~ 24.25 GHz 250 2500 Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits as below table, whichever is the lesser attenuation Frequencies Field strength Measurement distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF120806E02 16 of 26 Report Format Version 5.0.0

4.2.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Spectrum Analyzer E4446A MY48250253 Aug. 29, 2011 Aug. 28, 2012 Agilent Pre-Selector N9039A MY46520310 Aug. 29, 2011 Aug. 28, 2012 Agilent Signal Generator N5181A MY49060347 July 25, 2011 July 24, 2012 Agilent ZFL-1000VH2 Pre-Amplifier Mini-Circuits AMP-ZFL-04 Nov. 15, 2011 Nov. 14, 2012 B Pre-Amplifier 8449B 3008A02465 Feb. 27, 2012 Feb. 26, 2013 Agilent SPACEK LABS SLKKa-48-6 9K16 Nov. 15, 2011 Nov. 14, 2012 Trilog Broadband Antenna VULB 9168 9168-361 Apr. 06, 2012 Apr. 05, 2013 SCHWARZBECK Horn_Antenna AIH.8018 0000220091110 Nov. 23, 2011 Nov. 22, 2012 AISI Horn_Antenna BBHA 9170 9170-424 Oct. 07, 2011 Oct. 06, 2012 SCHWARZBECK RF104-205 RF Cable NA RF104-207 Dec. 27, 2011 Dec. 26, 2012 RF104-202 RF Cable NA CHHCAB_001 Oct. 08, 2011 Oct. 07, 2012 ADT_Radiated Software NA NA NA _V8.7.05 Antenna Tower & Turn Table NA NA NA NA CT Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. H. 4. The FCC Site Registration No. is 797305. 5 The CANADA Site Registration No. is IC 7450H-3. 6 Tested Date: Aug.08, 2012 Report No.: RF120806E02 17 of 26 Report Format Version 5.0.0

4.2.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meters chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 10 Hz for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.2.4 DEVIATION FROM TEST STANDARD No deviation. Report No.: RF120806E02 18 of 26 Report Format Version 5.0.0

4.2.5 TEST SETUP Ant. Tower 1-4m Variable EUT& 3m 10m Support Units Turn Table 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 4.2.6 EUT OPERATING CONDITIONS Same as 4.1.6 Report No.: RF120806E02 19 of 26 Report Format Version 5.0.0

4.2.7 TEST RESULTS BELOW 1GHz WORST-CASE DATA CHANNEL TX Channel 1 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE Below 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 216.87 38.5 QP 46.0 -7.5 1.00 H 247 26.69 11.79 2 254.29 40.1 QP 46.0 -5.9 1.00 H 81 26.68 13.46 3 304.50 42.7 QP 46.0 -3.3 1.00 H 282 27.34 15.40 4 518.38 31.0 QP 46.0 -15.0 1.50 H 285 10.57 20.44 5 605.18 34.7 QP 46.0 -11.3 1.50 H 105 12.42 22.29 6 750.25 30.0 QP 46.0 -16.0 1.00 H 330 5.45 24.57 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 32.49 31.7 QP 40.0 -8.3 1.00 V 342 18.65 13.02 2 256.54 38.0 QP 46.0 -8.0 1.50 V 0 24.42 13.54 3 304.15 41.0 QP 46.0 -5.0 1.50 V 157 25.60 15.40 4 398.29 35.6 QP 46.0 -10.4 1.50 V 232 17.94 17.66 5 521.81 34.3 QP 46.0 -11.7 1.50 V 0 13.80 20.52 6 604.94 38.0 QP 46.0 -8.0 1.50 V 51 15.73 22.28 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF120806E02 20 of 26 Report Format Version 5.0.0

ABOVE 1GHz DATA CHANNEL TX Channel 1 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2400.00 57.2 PK 74.0 -16.8 1.10 H 153 24.79 32.41 2 2400.00 44.4 AV 54.0 -9.6 1.10 H 153 11.99 32.41 3 *2405.00 93.4 PK 114.0 -20.6 1.10 H 153 60.98 32.42 4 *2405.00 90.9 AV 94.0 -3.1 1.10 H 153 58.49 32.42 5 4810.00 54.2 PK 74.0 -19.8 1.18 H 33 12.28 41.92 6 4810.00 44.1 AV 54.0 -9.9 1.18 H 33 2.18 41.92 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2400.00 57.5 PK 74.0 -16.5 1.00 V 219 25.09 32.41 2 2400.00 44.2 AV 54.0 -9.8 1.00 V 219 11.79 32.41 3 *2405.00 87.5 PK 114.0 -26.5 1.00 V 219 55.08 32.42 4 *2405.00 84.9 AV 94.0 -9.1 1.00 V 219 52.48 32.42 5 4810.00 51.9 PK 74.0 -22.1 1.02 V 101 9.98 41.92 6 4810.00 40.3 AV 54.0 -13.7 1.02 V 101 -1.62 41.92 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. " * ": Fundamental frequency. Report No.: RF120806E02 21 of 26 Report Format Version 5.0.0

CHANNEL TX Channel 24 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2444.00 92.8 PK 114.0 -21.2 1.06 H 151 60.28 32.52 2 *2444.00 90.3 AV 94.0 -3.7 1.06 H 151 57.78 32.52 3 4888.00 53.8 PK 74.0 -20.2 1.19 H 29 11.79 42.01 4 4888.00 43.8 AV 54.0 -10.2 1.19 H 29 1.79 42.01 5 7332.00 54.2 PK 74.0 -19.8 1.09 H 74 7.61 46.59 6 7332.00 42.2 AV 54.0 -11.8 1.09 H 74 -4.39 46.59 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2444.00 86.3 PK 114.0 -27.7 1.00 V 274 53.78 32.52 2 *2444.00 83.5 AV 94.0 -10.5 1.00 V 274 50.98 32.52 3 4888.00 51.7 PK 74.0 -22.3 1.00 V 102 9.69 42.01 4 4888.00 40.1 AV 54.0 -13.9 1.00 V 102 -1.91 42.01 5 7332.00 53.3 PK 74.0 -20.7 1.00 V 195 6.71 46.59 6 7332.00 40.9 AV 54.0 -13.1 1.00 V 195 -5.69 46.59 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. " * ": Fundamental frequency. Report No.: RF120806E02 22 of 26 Report Format Version 5.0.0

CHANNEL TX Channel 24 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2474.00 92.5 PK 114.0 -21.5 1.05 H 155 59.90 32.60 2 *2474.00 89.9 AV 94.0 -4.1 1.05 H 155 57.30 32.60 3 2483.50 57.9 PK 74.0 -16.1 1.05 H 155 25.27 32.63 4 2483.50 44.0 AV 54.0 -10.0 1.05 H 155 11.37 32.63 5 4948.00 53.2 PK 74.0 -20.8 1.16 H 25 11.20 42.00 6 4948.00 43.3 AV 54.0 -10.7 1.16 H 25 1.30 42.00 7 7422.00 53.9 PK 74.0 -20.1 1.15 H 77 7.11 46.79 8 7422.00 42.0 AV 54.0 -12.0 1.15 H 77 -4.79 46.79 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2474.00 86.1 PK 114.0 -27.9 1.00 V 274 53.50 32.60 2 *2474.00 83.1 AV 94.0 -10.9 1.00 V 274 50.50 32.60 3 2483.50 57.5 PK 74.0 -16.5 1.00 V 274 24.87 32.63 4 2483.50 43.9 AV 54.0 -10.1 1.00 V 274 11.27 32.63 5 4948.00 51.4 PK 74.0 -22.6 1.00 V 109 9.40 42.00 6 4948.00 39.9 AV 54.0 -14.1 1.00 V 109 -2.10 42.00 7 7422.00 53.5 PK 74.0 -20.5 1.05 V 189 6.71 46.79 8 7422.00 40.9 AV 54.0 -13.1 1.05 V 189 -5.89 46.79 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. " * ": Fundamental frequency. Report No.: RF120806E02 23 of 26 Report Format Version 5.0.0

5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF120806E02 24 of 26 Report Format Version 5.0.0

6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF Lab Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety/Telecom Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also. Report No.: RF120806E02 25 of 26 Report Format Version 5.0.0

7. APPENDIX A – MODIFICATION RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test. ---END--- Report No.: RF120806E02 26 of 26 Report Format Version 5.0.0


Document Created: 2012-08-23 09:59:45
Document Modified: 2012-08-23 09:59:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC