Test Report (JBP).pdf

FCC ID: JNZB00029

Test Report

Download: PDF
FCCID_3467721

FCC Certification Test Report Report No.: FC170603E01 R1 Test Model: B-00029 Received Date: June 03, 2017 Test Date: June 09 to July 10, 2017 Issued Date: July 11, 2017 Applicant: LOGITECH FAR EAST LTD. Address: #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location (1): E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: FC170603E01 R1 Page No. 1 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ......................................................................................................................... 4 2 Summary of Test Results......................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information ................................................................................................................................. 6 3.1 Features of EUT .................................................................................................................................. 6 3.2 General Description of EUT ................................................................................................................ 6 3.3 Operating Modes of EUT and Determination of Worst Case Operating Mode ................................... 7 3.4 Test Program Used and Operation Descriptions ................................................................................. 7 3.5 Primary Clock Frequencies of Internal Source ................................................................................... 7 3.6 Miscellaneous ...................................................................................................................................... 8 4 Configuration and Connections with EUT ............................................................................................. 9 4.1 Connection Diagram of EUT and Peripheral Devices ......................................................................... 9 4.2 Configuration of Peripheral Devices and Cable Connections ............................................................ 11 5 Conducted Emissions at Mains Ports .................................................................................................. 12 5.1 Limits ................................................................................................................................................. 12 5.2 Test Instruments ................................................................................................................................ 12 5.3 Test Arrangement .............................................................................................................................. 13 5.4 Supplementary Information ............................................................................................................... 13 5.5 Test Results ....................................................................................................................................... 14 6 Radiated Emissions up to 1 GHz .......................................................................................................... 16 6.1 Limits ................................................................................................................................................. 16 6.2 Test Instruments ................................................................................................................................ 17 6.3 Test Arrangement .............................................................................................................................. 18 6.4 Supplementary Information ............................................................................................................... 18 6.5 Test Results (Mode 1) ....................................................................................................................... 19 6.6 Test Results (Mode 2) ....................................................................................................................... 21 7 Radiated Emissions above 1 GHz......................................................................................................... 23 7.1 Limits ................................................................................................................................................. 23 7.2 Test Instruments ................................................................................................................................ 24 7.3 Test Arrangement .............................................................................................................................. 25 7.4 Supplementary Information ............................................................................................................... 25 7.5 Test Results (Mode 1) ....................................................................................................................... 26 7.6 Test Results (Mode 2) ....................................................................................................................... 28 8 Pictures of Test Arrangements ............................................................................................................. 30 Appendix – Information on the Testing Laboratories ................................................................................ 31 Report No.: FC170603E01 R1 Page No. 2 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

O au R eAU Release Control Record Issue No. Description Date Issued FC170603E01 Original release. June 28, 2017 FC170603E01 R1 Added the accessory device, July 11, 2017 Report No.: FC170603E01 R1 Page No. 3/ 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

1 Certificate of Conformity Product: Wireless Headphones & Charger Case Brand: Jaybird Test Model: B-00029 Sample Status: ENGINEERING SAMPLE Applicant: LOGITECH FAR EAST LTD. Test Date: June 09 to July 10, 2017 Standards: 47 CFR FCC Part 15, Subpart B, Class B ICES-003:2016 Issue 6, Class B ANSI C63.4:2014 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: July 11, 2017 Claire Kuan / Specialist Approved by : , Date: July 11, 2017 Ken Lu / Manager Report No.: FC170603E01 R1 Page No. 4 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

6 U h EAU 2 Summary of Test Results 47 CFR ECC Part 15, Subpart B / ICES—003:2016 Issue 6, Class B ANSI €63.4:2014 FCC ICES—003 . Clause Clause Test Item Result/Remarks Verdict AC Power Line Conducted Minimum passing Class B margin 15197 81 |Emigsions is —17.86 dB at 0. 15066 MHz Pass 6.21 Radiated Emissions up to 1 Minimum passing Class B margin Pass "C GHz is —5.08 dB at 38.03 MHz 15.109 — —— — — — 6.2.2 Radiated Emissions above 1| Minimum passing Class B margin Pass "~* GHz is —16.75 dB at 7991.25 MHz. Note: There is no deviation to the applied test methods and requirements covered by the scope of this report. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT: The listed uncertainties are the worst case uncertainty for the entire range of measurement. Please note that the uncertainty values are provided for informational purposes only and are not used in determining the PASS/FAIL results. Measurement Frequency Expand(figzl)Jr(]f)e rtainty Conducted Emissions at mains ports 150kHz ~ 30MHz 1.84 dB Radiated Emissions up to 1 GHz 30MHz ~ 1GHz 3.91 dB 1GHz ~ 6GHz 4.73 dB Radi adiated Emissi Emissions above 1 GHz GH BGHz — 18GHz 5.24 ap 2.2 Modification Record There were no modifications required for compliance. Report No.: FC170603E01 R1 Page No. 5/ 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

3 General Information 3.1 Features of EUT The tests reported herein were performed according to the method specified by LOGITECH FAR EAST LTD., for detailed feature description, please refer to the manufacturer's specifications or user's manual. 3.2 General Description of EUT Product Wireless Headphones & Charger Case Brand Jaybird Test Model B-00029 Sample Status ENGINEERING SAMPLE Operating Software NA 1. Eabud charge inputs are (4.6V, 200mA to 5.0V, 200mA) each Power Supply rating 2. Charger case output is 4.7V, 200mA for each earbud (400mA total) Accessory Device USB Changer x 1 Data Cable Supplied USB to Micro USB Cable (Unshielded, 0.3m) x 1 Note: 1. The EUT may have a lot of colors for marketing requirement. 2. The EUT could be supplied with 3.8Vdc battery and the Charger Case is only for battery to recharge as the following table: Item Brand Model No. Spec. NTA3542-L Battery GP DC 3.8V NTA3542-R Item Brand Model No. Spec. Charger Case Jaybird B-00029 DC 5V, 1A The Charger Case must be assembled a battery as following table: Brand Model No. Spec. AEC AEC11540 DC 4.2V 3. The antenna provided to the EUT, please refer to the following table: Antenna Gain Frequency Cable Brand Model Antenna Type Connecter Type (dBi) range(GHz) Length NA NA -3.10 2.4-2.4835 Loop Antenna NA NA Report No.: FC170603E01 R1 Page No. 6 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

3.3 Operating Modes of EUT and Determination of Worst Case Operating Mode Test modes are presented in the report as below. Test Condition Mode Conducted test Function Type 1 Charging Mode Radiated test Mode Function Type 1 Normal Operation 2 Charging Mode 3.4 Test Program Used and Operation Descriptions Conducted test mode 1 / Radaited test mode 2: 1. Turn on the power of all equipment. 2. The EUT was powered by support unit B (Adapter). Radaited test mode 2: 1. Turn on the power of all equipment. 2. Support unit A (Laptop) runs "media player.exe" program to plays music to EUT via BT link. 3.5 Primary Clock Frequencies of Internal Source The EUT is provided by LOGITECH FAR EAST LTD., for detailed internal source, please refer to the manufacturer's specifications. Report No.: FC170603E01 R1 Page No. 7 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

3.6 Miscellaneous Labelling Requirements for Part 15 Devices:  Verification The specific labelling requirements for a device subject to the Verification procedure are contained in Section 15.19(a). These labelling requirements are: If the device is subject only to Verification, include a label bearing a unique identifier (Section 2.954) and one of three compliance statements specified in Section 15.19(a). If the labeling area for the device is so small, and/or it is not practical to place the compliance statement on the device, then the statement can be placed in the user manual or product packaging (Section 15.19(a)(5)). However, the device must still be labelled with the unique identifier (Verification). Generally, devices smaller than the palm of the hand are considered too small for the compliance statement.  Certification If the device is subject to Certification: (1) Section 2.925 contains information on identification of the equipment; (2) include a label bearing an FCC Identifier (FCC ID) (Section 2.926) and (3) include the appropriate compliance statement in Section 15.19(a). If the device is considered too small and therefore it is impractical (smaller than the palm of the hand) to display the compliance statement, then the statement may be placed in the user manual or product packaging. However, the device must still be labelled with the FCC ID. If the device is unquestionably too small for the FCC ID to be readable (smaller than 4-6 points), the FCC ID may be placed in the user manual. However, it must be determined that the device itself is too small – the label area allocated to the FCC ID may not be reduced because of over crowded identification of other product and regulatory information. An electronic display of the FCC ID (see 9. Electronic Labelling below) may be used for Certification of Section 15.212 modular transmitters and software defined radios (Section 2.944).  Declaration of Conformity (DoC): The labelling requirements for a device subject to the DoC procedure are specified in Section 15.19(b). The label should include the FCC logo along with the Trade Name and Model Number, which satisfies the unique identifier requirement of Section 2.1074 if it represents the identical equipment tested for DoC compliance. For personal computers assembled from authorized components, the following additional text must also be included: “Assembled from tested components,” “Complete system not tested.” When the device is so small and/or when it is not practical to place the required additional text on the device, the text may be placed in the user manual or pamphlet supplied to the user. However, the FCC logo, Trade Name, and Model Number must still be displayed on the device (Section 15.19(b)(3)). Part 15 Declaration of Conformity (DoC) Label Examples Equipment certified as software defined radio may use a means that readily displays the FCC ID on an electronic display screen, instead of labelling the device (Section 2.925 (e)). Further information may refer to FCC KDB:784748 D01 Labelling Part 15 &18 Guidelines Labelling Requirements for ICES-003 Devices:  Industry Canada ICES-003 Compliance Label: CAN ICES-3 (*)/NMB-3(*) * Insert either “A” or “B” but not both to identify the applicable Class of ITE. Report No.: FC170603E01 R1 Page No. 8 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

4 Configuration and Connections with EUT 4.1 Connection Diagram of EUT and Peripheral Devices Conducted test mode 1 / Radaited test mode 2: (1) Micro USB (B)Adapter EUT Report No.: FC170603E01 R1 Page No. 9 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

Radaited test mode1: BT Micro USB EUT Remote Site BT (A)Laptop Report No.: FC170603E01 R1 Page No. 10 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

4.2 Configuration of Peripheral Devices and Cable Connections ID Product Brand Model No. Serial No. FCC ID Remarks A. Laptop DELL PP32LA HSLB32S FCC DoC Provided by Lab Adapter Apple NA NA NA Provided by Lab B. Adapter Amigo AMS47-0501000FU NA NA Provided by Lab Note: 1. All power cords of the above support units are non-shielded (1.8m). Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. USB to Micro USB Cable 1 0.3 No 0 Supplied by client Note: The core is originally attached to the cable. Report No.: FC170603E01 R1 Page No. 11 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

5 Conducted Emissions at Mains Ports 5.1 Limits Class A (dBuV) Class B (dBuV) Frequency (MHz) Quasi-peak Average Quasi-peak Average 0.15 - 0.5 79 66 66 - 56 56 - 46 0.50 - 5.0 73 60 56 46 5.0 - 30.0 73 60 60 50 Notes: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases linearly with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 5.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver ESCS 30 100375 May. 09, 2017 May. 08, 2018 R&S Line-Impedance Stabilization Network (for NSLK-8127 8127-522 Aug. 31, 2016 Aug. 30, 2017 EUT) SCHWARZBECK Line-Impedance Stabilization Network ENV216 100072 June 03, 2017 June 02, 2018 (for Peripheral) R&S RF Cable 5D-FB COACAB-002 Mar. 03, 2017 Mar. 02, 2018 10 dB PAD HAT-10+ CONATT-003 Sep. 13, 2016 Sep. 12, 2017 Mini-Circuits 50 ohms Terminator N/A EMC-03 Sep. 29, 2016 Sep. 28, 2017 50 ohms Terminator N/A EMC-02 Sep. 29, 2016 Sep. 28, 2017 Software BVADT_Cond_ NA NA NA BVADT V7.3.7.4 Note: 1. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. C. 3. The VCCI Con C Registration No. is C-3611. 4. Tested Date: July 10, 2017 Report No.: FC170603E01 R1 Page No. 12 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

5.3 Test Arrangement a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The test results of conducted emissions at mains ports are recorded of six worst margins for quasi-peak (mandatory) [and average (if necessary)] values against the limits at frequencies of interest unless the margin is 20 dB or greater. Note: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. For the actual test configuration, please refer to the related Item – Photographs of the Test Configuration. 5.4 Supplementary Information There is not any deviation from the test standards for the test method. Report No.: FC170603E01 R1 Page No. 13 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

5.5 Test Results Detector F_unction Quasi—Peak (QP) / Frequency Range 150kHz ~ 3O0MHz & Reso_lutlon Average (AV), OkHz Bandwidth Input Power 120Vac, 60Hz gz‘r"';?‘:‘o"r‘]‘;“‘a' 27°C, 68%RH Tested by Eagle Chen Test Mode Mode 1 Phase Of Power : Line (L) Frequency Correction Reading Value Emission Level Limit Margin No Factor (dBuV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15391 10.13 32.89 27.68 43.02 37.81 65.79 55.79 —22.77 —17.98 2 0.20078 10.12 29.64 23.95 39.76 34.07 63.58 53.58 —23.82 —19.51 3 0.24766 10.12 25.26 19.60 35.38 29.72 61.84 51.84 —26.46 —22.12 4 0.31016 10.12 2216 14.41 32.28 24.53 59.97 49.97 —27.69 —25.44 5 0.35313 10.12 23.15 13.61 33.27 23.73 58.89 48.89 —25.62 —25.16 6 0.39609 10.12 21.06 10.90 31.18 21.02 57.93 47.93 —26.75 —26.91 7 0.60313 10.13 22.81 16.48 32.94 26.61 56.00 46.00 —23.06 —19.39 Remarks: 1. Q.P. and AV. are abbreviations of quasi—peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level — Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: FC170603E01 R1 Page No. 14 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

Detector Function . Frequency Range 150kHz ~ 3O0MHz & Reso_lution g:;?;e(%/goggl_qz Bandwidth " Input Power 120Vac, 60Hz gz‘r’;?‘:‘o"r‘;“‘a' 27°C, 68%RH Tested by Eagle Chen Test Mode Mode 1 Phase Of Power : Neutral (N) Frequency Correction Reading Value Emission Level Limit Margin No Factor (dBuV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15066 10.18 33.73 27.92 43.91 38.10 65.96 55.96 —22.05 —17.86 2 0.17734 10.12 17.14 7.60 27.26 17.72 64.61 54.61 —37.35 —36.89 3 0.20016 10.07 29.62 23.16 39.69 33.23 63.60 53.60 —23.91 —20.37 4 0.25172 10.08 26.97 18.71 37.05 28.79 61.70 51.70 —24.65 —22.91 5 0.29844 10.08 24.64 15.22 34.72 25.30 60.29 50.29 —25.57 —24.99 6 0.36094 10.09 21.83 10.70 31.92 20.79 58.71 48.71 —26.79 —27.92 7 0.53281 10.13 23.16 11.99 33.29 22.12 56.00 46.00 —22.71 —23.88 8 0.63828 10.15 20.34 8.77 30.49 18.92 56.00 46.00 —25.51 —27.08 Remarks: 1. Q.P. and AV. are abbreviations of quasi—peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level — Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: FC170603E01 R1 Page No. 15 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

6 Radiated Emissions up to 1 GHz 6.1 Limits Emissions radiated outside of the specified bands, shall be according to the general radiated limits as following: Radiated Emissions Limits at 10 meters (dBμV/m) Frequencies FCC 15B / ICES-003, FCC 15B / ICES-003, CISPR 22, Class A CISPR 22, Class B (MHz) Class A Class B 30-88 39 29.5 88-216 43.5 33.1 40 30 216-230 46.4 35.6 230-960 47 37 960-1000 49.5 43.5 Radiated Emissions Limits at 3 meters (dBμV/m) Frequencies FCC 15B / ICES-003, FCC 15B / ICES-003, CISPR 22, Class A CISPR 22, Class B (MHz) Class A Class B 30-88 49.5 40 88-216 54 43.5 50.5 40.5 216-230 56.9 46 230-960 57.5 47.5 960-1000 60 54 Notes: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. QP detector shall be applied if not specified. Report No.: FC170603E01 R1 Page No. 16 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

6.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY50010125 Apr. 15, 2017 Apr. 14, 2018 Agilent N9038A MY50010156 Aug. 18, 2016 Aug. 17, 2017 Pre-Amplifier 310N 352925 Aug. 29, 2016 Aug. 28, 2017 Sonoma 310N 352926 Aug. 29, 2016 Aug. 28, 2017 Trilog Broadband VULB 9168 9168-359 Dec. 28, 2016 Dec. 27, 2017 Antenna VULB 9168 9168-358 Dec. 16, 2016 Dec. 15, 2017 SCHWARZBECK Fixed attenuator UNAT-5+ CHF-001 Sep. 9, 2016 Sep. 08, 2017 Mini-Circuits UNAT-5+ CHF-002 Sep. 9, 2016 Sep. 08, 2017 CHFCAB-001-1 CHFCAB-001-3 Sep. 22, 2016 Sep. 21, 2017 CHFCAB-001-4 RF Cable 8D-FB CHFCAB-002-1 CHFCAB-002-3 Sep. 22, 2016 Sep. 21, 2017 CHFCAB-002-4 Software ADT_Radiated_V8.7.08 NA NA NA BVADT Antenna Tower & Turn Table NA NA NA NA CT Note: 1. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in 10m Chamber No. F. 3. The FCC Site Registration No. is 928149. 4. The VCCI Site Registration No. is R-3252. 5. The CANADA Site Registration No. is IC 7450H-1. 6. Tested Date: June 09, 2017 Report No.: FC170603E01 R1 Page No. 17 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

6.3 Test Arrangement a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at an accredited test facility. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 10 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is up to 1 GHz. Note: The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for quasi-peak detection (QP) at frequency up to 1GHz. For the actual test configuration, please refer to the related Item – Photographs of the Test Configuration. 6.4 Supplementary Information There is not any deviation from the test standards for the test method. Report No.: FC170603E01 R1 Page No. 18 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

6.5 Test Results (Mode 1) Detector Function & Frequency Range 30MHz ~ 1GHz Resolution Quasi—Peak (QP), 120kHz Bandwidth Input Power pe 3.8Vv EZ‘;‘;‘;?O“QE”‘E" 24°C, 69%RH Tested by Mike Hsieh Test Mode Mode 1 Antenna Polarity & Test Distance : Horizontal at 10 m Frequency Emission Limit Margin Antgnna Table Raw Correction No (MHz) Level (dBuV/m) (dB) Height Angle Value Factor (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 34.61 20.23 QP 30.00 —9.77 4.00 H 345 34.14 —13.91 2 53.72 15.27 QP 30.00 —14.73 2.00 H 243 28.10 —12.83 3 147.22 15.53 QP 30.00 —14.47 3.00 H 14 27.95 —12.42 4 461.97 21.74 QP 37.00 —15.26 2.00 H 359 28.93 —7.19 5 746.59 26.99 QP 37.00 —10.01 3.00 H 293 28.71 —1.72 6 987.95 27.51 QP 37.00 —9.49 4.00 H 18 24.77 2.74 Remarks: 1. Emission Level(dBuV/m)= Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) — Pre—Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level — Limit value Level (dBuVim} 8n 70 Ed 5o 40 30 20 10 0 an— i i i i i i i 1 300 400 500 600 700 eo0 s00 1000 Frequency (MHz) Report No.: FC170603E01 R1 Page No. 19 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

Detector Function & Frequency Range 30MHz ~ 1GHz Resolution Quasi—Peak (QP), 120kHz Bandwidth Environmental s Input Power DC 3.8V Conditions 24°C, 69%RH Tested by Mike Hsieh Test Mode Mode 1 m |Feaw| BB um hago Aoe foe t es Antenna Polarity & Test Distance : Vertical at 10 m t (dBuy/m) (dBuV/‘m) (dB) (m) (Degree) (dBuv) (dB/m) 1 37.81 »3.81GP 3000 619 1.00V 67 3742 —13.61 2 59.08 i02sap 3000 —i97s 1.00Vv 8 Pass 1333 3 13634 i6i8gar 3000 i1382 i00v 237 2929 311 4 1961 i6azap 3000 —i353 200V o 32090 —15.62 5 |~593.98 »s33GP 3700 —11.67 4.00V 226 29.35 4.02 6 73083 2ri30P 3700 987 1.00Vv 150 28.96 1.83 Remarks: 1. Emission Level(dBuV/m)= Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) — Pre—Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level — Limit value Level (dBuVim} 80 T0 Ed 50 40 an—}— 20 10 0 an— i i i i i i i i i 200 300 400 500 600 zo0 soo Eul 1000 Frequency (MHz) Report No.: FC170603E01 R1 Page No. 20 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

6.6 Test Results (Mode 2) Detector Function & Frequency Range 30MHz ~ 1GHz Resolution Quasi—Peak (QP), 120kHz Bandwidth Input Power pe sv (E;;‘r’]";‘;?o“;s”‘a' 24°C, 69%RH Tested by Mike Hsieh Test Mode Mode 2 Antenna Polarity & Test Distance : Horizontal at 10 m Frequency Emission Limit Margin Antgnna Table Raw Correction No (MHz) Level (dBuV/m) (dB) Height Angle Value Factor (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 35.07 16.03 QP 30.00 —13.97 1.00 H 300 29.99 —13.96 2 54.01 15.38 QP 30.00 —14.62 2.00 H 34 28.19 —12.81 3 137.65 14.56 QP 30.00 —15.44 2.00 H 74 27.51 —12.95 4 147.64 15.82 QP 30.00 —14.18 2.00 H 280 28.21 —12.39 5 461.97 2213 QP 37.00 —14.87 2.00 H 34 29.32 —7.19 6 593.98 23.13 QP 37.00 —13.87 2.00 H 66 27.37 ~4.24 Remarks: 1. Emission Level(dBuV/m)= Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) — Pre—Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level — Limit value Level (dBuVim} 80 70 50 50 40 30 an—l1 at 10 0 4n i i i i i i i 1 300 400 500 600 700 s00 s00 1000 Frequency (MHiz) Report No.: FC170603E01 R1 Page No. 21 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

Detector Function & Frequency Range 30MHz ~ 1GHz Resolution Quasi—Peak (QP), 120kHz Bandwidth Environmental s o Input Power DC 5V Conditions 24°C, 69%RH Tested by Mike Hsieh Test Mode Mode 2 Antenna Polarity & Test Distance : Vertical at 10 m Frequency Emission Limit Margin Antgnna Table Raw Correction No (MH2) Level (dBuV/m) (dB) Height Angle Value Factor (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 38.03 24.92 QP 30.00 —5.08 1.00 V 259 38.47 —13.55 2 57.23 17.22 QP 30.00 —12.78 2.00 V 320 30.46 —13.24 3 107.55 17.07 QP 30.00 —12.93 1.00 V 211 32.87 —15.80 4 143.93 17.11 QP 30.00 —12.89 1.00 V 120 29.64 —12.53 5 231.30 16.85 QP 37.00 —20.15 1.00 V 67 31.54 —14.69 6 330.00 19.24 QP 37.00 —17.76 2.00 V 8 29.79 —10.55 Remarks: 1. Emission Level(dBuV/m)= Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) — Pre—Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level — Limit value Level (dBuVim} 80 70 50 50 10 30— a 40005 5 10 0 4n—, ; ; ; ; ; ; ; ; ; , 30 100 200 300 400 500 600 700 a00 Eul 1000 Frequency (MHz) Report No.: FC170603E01 R1 Page No. 22 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

7 Radiated Emissions above 1 GHz 7.1 Limits Emissions radiated outside of the specified bands, shall be according to the general radiated limits as following: Radiated Emissions Limits at 10 meters (dBμV/m) Frequencies FCC 15B / ICES-003, FCC 15B / ICES-003, CISPR 22, Class A CISPR 22, Class B (MHz) Class A Class B 1000-3000 Avg: 49.5 Avg: 43.5 Not defined Not defined Above 3000 Peak: 69.5 Peak: 63.5 Not defined Not defined Radiated Emissions Limits at 3 meters (dBμV/m) Frequencies FCC 15B / ICES-003, FCC 15B / ICES-003, CISPR 22, Class A CISPR 22, Class B (MHz) Class A Class B Avg: 56 Avg: 50 1000-3000 Avg: 60 Avg: 54 Peak: 76 Peak: 70 Peak: 80 Peak: 74 Avg: 60 Avg: 54 Above 3000 Peak: 80 Peak: 74 Notes: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Frequency Range (For unintentional radiators) Highest frequency generated or used in the device or Upper frequency of measurement range (MHz) on which the device operates or tunes (MHz) Below 1.705 30 1.705-108 1000 108-500 2000 500-1000 5000 5th harmonic of the highest frequency or 40GHz, Above 1000 whichever is lower Report No.: FC170603E01 R1 Page No. 23 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

7.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY50010125 Apr. 15, 2017 Apr. 14, 2018 Agilent Pre-Amplifier 8449B 3008A01975 Feb. 26, 2017 Feb. 25, 2018 Agilent Horn Antenna BBHA 9120D D123 Dec. 15, 2016 Dec. 14, 2017 SCHWARZBECK RF Coaxial Cable EMC104-SM-SM-11000 170209 Mar. 07, 2017 Mar. 06, 2018 RF Coaxial Cable EMC104-SM-SM-6000 170207 Mar. 07, 2017 Mar. 06, 2018 RF Coaxial Cable EMC104-SM-SM-2500 170206 Mar. 07, 2017 Mar. 06, 2018 Software ADT_Radiated_ NA NA NA BVADT V8.7.08 Antenna Tower & Turn Table NA NA NA NA CT Fix tool for Boresight BAF-01 5 NA NA antenna tower Note: 1. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in 10m Chamber No. F. 3. Tested Date: June 09, 2017 Report No.: FC170603E01 R1 Page No. 24 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

7.3 Test Arrangement a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at an accredited chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna can be varied from one meter to four meters, the height of adjustment depends on the EUT height and the antenna 3dB beamwidth both, to detect the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The spectrum analyzer system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. Note: The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and video bandwidth is 3MHz for Peak detection (PK) at frequency above 1GHz. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz for Average detection (AV) at frequency above 1GHz. Ant. Tower 1 - 4m Variable EUT& 3m Support Units Turn Table Absorber 80cm Ground Plane Test Receiver The test arrangement is in accordance with ANSI 63.4:2014. For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 7.4 Supplementary Information There is not any deviation from the test standards for the test method. Report No.: FC170603E01 R1 Page No. 25 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

7.5 Test Results (Mode 1) Detector Function & Frequency Range 1GHz ~12.5GHz Resolution zs:ra(zl(()A/v) 1MHz Bandwidth 9 f Environmental s Input Power DC 3.8V Conditions 25°C, 60%RH Tested by Mike Hsieh Test Mode Mode 1 Antenna Polarity & Test Distance : Horizontal at 3 m Frequency Emission Limit Margin Antgnna Table Raw Correction No (MHz) Level (dBuV/m) (dB) Height Angle Value Facior (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 1552.92 37.07 PK 74.00 —36.93 1.00 H 181 40.35 —3.28 2 1552.92 23.94 AV 54.00 —30.06 1.00 H 181 27.22 —3.28 3 2915.90 39.88 PK 74.00 —34.12 1.00 H 20 37.37 2.51 4 2915.90 27.16 AV 54.00 —26.84 1.00 H 20 24.65 2.51 5 3967.35 41.24 PK 74.00 —32.76 1.00 H 236 36.43 4.81 6 3967.35 28.95 AV 54.00 —25.05 1.00 H 236 24.14 4.81 7 431712 43.47 PK 74.00 —30.53 1.00 H 193 37.53 5.94 8 431712 30.09 AV 54.00 —23.91 1.00 H 193 24.15 5.94 9 5881.12 45.59 PK 74.00 —28.41 1.00 H 360 35.80 9.79 10 5881.12 32.31 AV 54.00 —21.69 1.00 H 360 22.52 9.79 11 7991.25 51.02 PK 74.00 —22.98 1.00 H 335 35.29 15.73 12 7991.25 37.25 AV 54.00 —16.75 1.00 H 335 21.52 15.73 Remarks: 1. Emission Level(dBuV/m)= Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) — Pre—Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level — Limit value Level (dBuVim} 80 80 70 50 50 40 30 20 10 0 1 1 1 1 1 1 1 1 1 1 1000 2000 4000 6000 8000 10000 12000 14000 16000 18000 Frequency (MHz) Report No.: FC170603E01 R1 Page No. 26 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

Detector Function & Frequency Range 1GHz ~12.5GHz Resolution zs:ra(zl(()A/v) 1MHz Bandwidth 9 f Environmental s Input Power DC 3.8V Conditions 25°C, 60%RH Tested by Mike Hsieh Test Mode Mode 1 Antenna Polarity & Test Distance : Vertical at 3 m mo Feauers LC "Tex." (dBuv/im) uim Meen (dBuV/m) (dB) Togy (m) rge vase Tieeo" (Degree) |_(dBuv) _|__(dB/im) 1 1756.08 39.34 PK 74.00 —34.66 1.00 V 189 41.81 247 2 1756.08 27.18 AV 54.00 —26.82 1.00 V 189 29.65 —2. 47 3 2793.50 40.54 PK 74.00 —33.46 1.00 V 12 37.31 3.23 4 2793.50 27.28 AV 54.00 —26.72 1.00 V 12 24.05 3.23 5 3967.78 41.61 PK 74.00 —32.39 1.00 V 33 36.80 4.81 6 3967.78 29.01 AV 54.00 —24.99 1.00 V 33 24.20 4.81 7 5403.00 45.26 PK 74.00 —28.74 1.00 V 299 36.66 8.60 8 5403.00 32.08 AV 54.00 —21.92 1.00 V 299 23.48 8.60 9 6673.32 46.59 PK 74.00 —27.41 1.00 V 355 34.45 1214 10 6673.32 33.92 AV 54.00 —20.08 1.00 V 355 21.78 1214 11 7876.93 50.59 PK 74.00 —23.41 1.00 V 37 35.26 15.33 12 7876.93 37.17 AV 54.00 —16.83 1.00 V 37 21.84 15.33 Remarks: 1. Emission Level(dBuV/m)= Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) — Pre—Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level — Limit value Level (dBuVim} 90 80 70 so 50 40 30 20 10 o 1 1 1 1 1 1 1 1 1 1 1000 2000 4000 6000 5000 10000 12000 14000 16000 18000 Frequency (MHz) Report No.: FC170603E01 R1 Page No. 27 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

7.6 Test Results (Mode 2) Detector Function & Peak (PK) / Frequency Range 1GHz ~12.5GHz Resolution Bandwidth Average (AV), 1MHz Environmental s o Input Power DC 5V Conditions 25°C, 60%RH Tested by Mike Hsieh Test Mode Mode 2 Antenna Polarity & Test Distance : Horizontal at 3 m Frequency Emission Limit Margin Antgnna Table Raw Correction No (MHz) Level (dBuV/m) (dB) Height Angle Value Factor (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 1756.50 38.42 PK 74.00 —35.58 1.00 H 163 40.89 —2. 47 2 1756.50 27.68 AV 54.00 —26.32 1.00 H 163 30.15 —2. 47 3 2889.12 39.98 PK 74.00 —34.02 1.00 H 215 37.45 2.53 4 2889.12 27.29 AV 54.00 —26.71 1.00 H 215 24.76 2.53 5 3805.00 41.78 PK 74.00 —32.22 1.00 H 28 37.10 4.68 6 3805.00 28.87 AV 54.00 —25.13 1.00 H 28 24.19 4.68 7 4998.40 44.80 PK 74.00 —29.20 1.00 H 120 36.90 7.90 8 4998.40 31.60 AV 54.00 —22.40 1.00 H 120 23.70 7.90 9 6866.70 47.37 PK 74.00 —26.63 1.00 H 34 34.69 12.68 10 6866.70 34.41 AV 54.00 —19.59 1.00 H 34 21.73 12.68 11 7936.00 49.57 PK 74.00 —24.43 1.00 H 93 34.00 15.57 12 7936.00 37.08 AV 54.00 —16.92 1.00 H 93 21.51 15.57 Remarks: 1. Emission Level(dBuV/m)= Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) — Pre—Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level — Limit value Level (dBuVim} 20 80 70 o 50 40 30 20 10 0 1 1 1 1 1 1 1 1 1 1 1000 2000 4000 6000 5000 10000 12000 14000 16000 15000 Frequency (MHiz) Report No.: FC170603E01 R1 Page No. 28 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

Detector Function & Frequency Range 1GHz ~12.5GHz Resolution zs:ra(zl(()A/v) 1MHz Bandwidth 9 f Environmental s o Input Power DC 5V Conditions 25°C, 60%RH Tested by Mike Hsieh Test Mode Mode 2 Antenna Polarity & Test Distance : Vertical at 3 m Frequency Emission Limit Margin Antgnna Table Raw Correction No (MH2) Level (dBuV/m) (dB) Height Angle Value Factor (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 1611.58 36.46 PK 74.00 —37.54 1.00 V 254 39.45 —2.99 2 1611.58 24.86 AV 54.00 —29.14 1.00 V 254 27.85 —2.99 3 2994.10 40.11 PK 74.00 —33.89 1.00 V 302 37.55 2.56 4 2994.10 27.38 AV 54.00 —26.62 1.00 V 302 24.82 2.56 5 3785.03 41.60 PK 74.00 —32.40 1.00 V 273 36.99 4.61 6 3785.03 28.89 AV 54.00 —25.11 1.00 V 273 24.28 4.61 7 4952.93 44.07 PK 74.00 —29.93 1.00 V 20 36.41 7.66 8 4952.93 31.65 AV 54.00 —22.35 1.00 V 20 23.99 7.66 9 5868.37 45.96 PK 74.00 —28.04 1.00 V 98 36.23 9.73 10 5868.37 32.32 AV 54.00 —21.68 1.00 V 98 22.59 9.73 11 8302.35 51.56 PK 74.00 —22.44 1.00 V 311 36.13 15.43 12 8302.35 36.84 AV 54.00 —17.16 1.00 V 311 21.41 15.43 Remarks: 1. Emission Level(dBuV/m)= Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) — Pre—Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level — Limit value Level (dBuVim} 90 80 70 so 50 40 30 20 10 o 1 1 1 1 1 1 1 1 1 1 1000 2000 4000 6000 5000 10000 12000 14000 16000 18000 Frequency (MHz) Report No.: FC170603E01 R1 Page No. 29 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

8 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: FC170603E01 R1 Page No. 30 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: FC170603E01 R1 Page No. 31 / 31 Report Format Version: 6.1.2 Cancels and replaces the report No.: FC170603E01 dated June 28, 2017


Document Created: 2017-07-11 14:42:11
Document Modified: 2017-07-11 14:42:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC