RF Exposure Information

FCC ID: JFZANC900BT

RF Exposure Info

Download: PDF
FCCID_4088512

Report No.: 18A0319R-SAUSP03V00 RF Exposure Evaluation Report Product Name : Wireless Headphones Model No. : ATH-ANC900BT FCC ID : JFZM50XBT Applicant : Audio-Technica Corporation Address : 2-46-1 Nishi-naruse, Machida, Tokyo,194-8666, Japan Date of Receipt : Oct. 24, 2018 Date of Declaration : Nov. 09, 2018 Report No. : 18A0319R-SAUSP03V00 Report Version : V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Page: 1 of 4

Report No.: 18A0319R-SAUSP03V00 Issued Date: Nov. 09, 2018 Report No.: 18A0319R-SAUSP03V00 Product Name Wireless Headphones Applicant Audio-Technica Corporation Address 2-46-1 Nishi-naruse, Machida, Tokyo,194-8666, Japan Manufacturer Audio-Technica Corporation Model No. ATH-ANC900BT FCC ID. JFZM50XBT Trade Name Audio-Technica Corporation FCC 47 CFR 1.1307 Applicable Standard KDB 447498 D01 v06 Test Result Complied Documented By : ( Senior Adm. Specialist / Joanne Lin ) Tested By : ( Engineer / Wen Lee ) Approved By : ( Director / Vincent Lin ) Page: 2 of 4

Report No.: 18A0319R-SAUSP03V00 1. GENERAL INFORMATION 1.1. EUT Description Product Name Wireless Headphones Trade Name Audio-Technica Corporation Model No. ATH-ANC900BT FCC ID. JFZM50XBT Frequency Range 2402 – 2480MHz Channel Number BT: 79CH BLE: 40CH Type of Modulation BT: FHSS: GFSK(1Mbps) /π/4DQPSK(2Mbps) / 8DPSK(3Mbps) BLE: GFSK(2Mbps) Antenna Type Chip Antenna Antenna Gain Refer to the table “Antenna List” Antenna List No. Manufacturer Part No. Antenna Type Peak Gain 1 MITSUBISHI AM03DP-ST01 Chip Antenna 1.2 dBi for 2.4 GHz Page: 3 of 4

Report No.: 18A0319R-SAUSP03V00 2. RF Exposure Evaluation 2.1. Standard Applicable According to 1.1307 (b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. 2.2. Measurement Result: According to KDB Publication 447498 D01, section 4.3.1, per the calculations of item 1 (Power(mW)/separation (mm)*sqrt(f(GHz)≤3.0), SAR is required as shown in the table below where calculated values are greater than 3.0: 1.) Operation frequency = 2450MHz and antenna separation distance = 5mm, Body SAR Test Exclusion Threshold = 10mW Maximum peak output power Body SAR Test Frequency Band Peak Gain: 1.2dBi Exclusion Threshold Calculated Threshold Value (MHz) conducted EIRP EIRP (≦3.0 SAR is not required) (mW) (dBm) (dBm) (mW) 2402 2.74 3.94 2.48 10 0.768 Note1: The SAR/MPE measurement is not necessary. Note2: The conducted maximum peak output power is refer to report No.: 18A0319R-RFUSP01V00 and 18A0319R-RFUSP01V00-A from the DEKRA. Page: 4 of 4


Document Created: 2018-11-14 17:29:49
Document Modified: 2018-11-14 17:29:49
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC