Modular Approval Letter

FCC ID: JEH2381GRPR

Cover Letter(s)

Download: PDF
FCCID_1366496

                                                   Adam Rudd
                                                   EMC Engineer
                                                   NCR Corporation

                                                   2651 Satellite Blvd
                                                   Duluth, GA 30096

REQUEST FOR MODULAR APPROVAL
FCC ID: JEH2381GRPR

2010-04-26

Federal Communications Commission
Equipment Authorization Branch
7435 Oakland Mills Road
Columbia, MD 21046



Gentlemen:

NCR Corporation requests modular approval for our 13.56 MHz RFID
transmitter in accordance with 47CFR15.212. The 2381GRPR satisfies your
definition of a self-contained radiofrequency device that is typically
incorporated into another host and complies with all of your requirements
as addressed below:

15.212(a)(1)(i)
The module features its own integrated shielding in the form of a metal
PCB shield over the RF components.

15.212(a)(1)(ii)
The module’s RF circuit does not allow for external data input. The
transmitter circuit is driven by an onboard microcontroller which provides
data buffering and protection from excessive data rates and over-
modulation.

15.212(a)(1)(iii)
The module features its own integrated DC power regulators to provide the
stable voltages necessary for operation even when the input voltage is
varied.

15.212(a)(1)(iv)
The antenna is etched in the PCB and thus permanently attached.

15.212(a)(1)(v)
The module was tested stand-alone and relied only on its own integrated
shielding, as shown in the application for certification, and the power cable
was > 10cm in length and used no ferrites.




                                                                         Page 1 of 2


15.212(a)(1)(vi)
The module contains a permanently affixed label indicating its FCC ID. The
module is not intended for sale to third parties; any device that contains
this module will be manufactured under the control of NCR Corporation and
will have the appropriate labeling as part of its regulatory compliance label.
The application for certification contains examples of these.

15.212(a)(1)(vii)
The module complies with all specific rules which apply to complete
transmitters of its type.

15.212(a)(1)(viii)
There are no applicable RF exposure rules for this module per 15.225 and
2.1091.

Sincerely,




Name: Adam Rudd
Date: 2010-04-26




                                                                     Page 2 of 2



Document Created: 2010-10-19 16:54:22
Document Modified: 2010-10-19 16:54:22

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC