User manual

FCC ID: JE4RWX95915

Users Manual

Download: PDF
FCCID_3891384

2.2m- 6 2.5m EN Registering the Detector into the system (7'-8') The iWave must identify itself to the system receiver. This can be done by typing the 11 digit serial number of the detector into the system or using RF mode. To register the T detectors using the serial number refer to the system installation manual. Enrolling using RF communication 1.Set the receiver to Learn mode. 2.Insert the batteries and press the tamper switch for at least 3 seconds. The iWAVE will send a WRITE message. A successful learning will be indicated by: (A) The system will sound a confirmation message and indicate the detector allocation in the system. (B) The iWAVE will blink. 1 2 3a IT Registrare il rilevatore nel sistema iWave deve essere identificato dal ricevitore del sistema. Per farlo, inserire il numero di serie a 11 cifre del rilevatore nel sistema o utilizzare la modalità RF. Per registrare il rilevatore utilizzando il numero di serie, fare riferimento al manuale di installazione. Acquisizione tramite comunicazione RF 1. Impostare il ricevitore in modalità di apprendimento. 2. Inserire le batterie e premere l’interruttore tamper per almeno 3 secondi. iWAVE invierà un messaggio WRITE se l’apprendimento è riuscito: PIR & Pet (A) Il sistema emetterà un segnale acustico con messaggio di conferma indicando l’allocazione del rilevatore nel Detectors sistema. (B) iWAVE lampeggia. PIR 915 MHz ES Registro del detector en el sistema Model: RWX95 El iWave debe identificarse en el receptor del sistema. Esto puede hacerse escribiendo en el sistema el número de serie de 11 dígitos del detector, o bien usando el modo RF (Radio Frecuencia). Para registrar el detector usando el Pet 915MHz número de serie, consulte el manual de instalación. Alta del detector usando la comunicación RF Model: RWX95P 1. Ponga al receptor en modo Aprendizaje. EN IT ES FR PR NL SE 2. Inserte las pilas y pulse el interruptor del tamper durante al menos 3 segundos. El iWAVE enviará un mensaje de Escritura. Si se ha dado de alta correctamente: (A) El sistema emitirá un mensaje de confirmación e indicará la asignación de detector en el sistema. (B) El iWAVE parpadeará. FR Enregistrement du détecteur dans le système CR 123, 3V Lithium Le modèle iWave doit être identifié par le système récepteur. Ceci peut être fait en entrant les 11 chiffres du numéro de série du détecteur dans le système ou en employant le mode RF. Pour enregistrer le détecteur en utilisant le numéro de série, consultez le manuel d'installation. Utilisation de la communication RF pour l'inscription 1.Réglez le récepteur en mode d'apprentissage. PIR/Pet: 10 A standby 3b 4 5 2.Insérez les batteries et appuyez sur le commutateur du dispositif anti-sabotage durant au moins 3 secondes. Le iWAVE enverra un message ECRIT. Le succès de l'apprentissage sera indiqué par : (A) Le système fera retentir un message de confirmation et indiquera l'inscription du détecteur dans le système. 915 MHz (B) Le iWAVE clignotera. PR Registrando o detector no sistema O iWave deve identificar-se ao receptor do sistema. Isto pode ser executado ao digitar o número de série de 11 dígitos do detector no sistema ou utilizando o modo de rádio freqüência. Para registrar o detector utilizando o número de série, consulte o manual de instalação do sistema. Inscrição através de comunicação de rádio freqüência T 0-255 min. 1.Configure o receptor para o modo "Learn". -10°C > 55°C 2.Introduza as pilhas e pressione o interruptor do tamper por pelo menos 3 segundos. O iWAVE enviará uma (14°F > 131°F) mensagem WRITE. Um aprendizado bem sucedido será indicado por : (A) O sistema enviará o som de uma mensagem de confirmação, e indicará a atribuição do detector no sistema. = 3 Y Typical (B) O iWAVE irá piscar. NL De detector in het systeem registreren De iWave moet zichzelf bij de systeemontvanger identificeren. Dit kan worden gedaan door het digitale serienummer 67.5mm 56mm 11 van de detector in het systeem of met RF-modus te typen. Om de detectors met het serienummer te registreren, (2.6") (2.2") moet u de installatiehandleiding van het systeem raadplegen. Met RF-communicatie registreren: 1.Stel de ontvanger in op de modus Leren 132mm 2.Plaats de accu’s en druk op gedurende minstens 3 seconden op de sabotageschakelaar. De iWAVE verzendt een (5.1") bericht SCHRIJVEN. Een succesvol leerproces wordt door het volgende aangegeven: (A) Het systeem laat een bevestigingsbericht horen en geeft in het systeem de detectortoewijzing aan. (B) De iWAVE knippert. SE Programmering av detektorn Detektorn iWave måste identifiera sig för systemets mottagare innan den kan användas. Detta kan göras genom att -10°C > 55°C enhetens 11-siffriga serienummer skrivs in eller genom att läsa in enheten via radio. För att skriva in detektorns (14°F > 131°F) serienummer, var vänlig se instruktioner i systemets Installationsmanual. Lär in detektorn via radio 1.Ställ mottagaren (centralapparaten) i Inlärningsläge. 2.Sätt i detektorns batterier och håll sabotagekontakten intryckt i minst tre (3) sekunder. iWAVE kommer då att sända ett SKRIV-meddelande. Lyckad inläsning bekräftas med: x2 x3 x2 (A) Ett talmeddelande som bekräftar att meddelandet tagits emot och som informerar att detektorn tilldelats till < 36kg (80lb) systemet. (B) Lysdioden i iWAVE kommer att blinka.

8 9 EN Parameters set by the system: IT Parametri impostati dalla centrale: ES Parámetros configurados: 7 Parameters Option Parametri Opzione Parámetros Opción 0-20Min Sensitivity Low* / High Sensibilita’ Bassa* / Alta Sensibilidad Baja* / Alta Operation Normal (2.5 min)* / Walk Test (0) Modo operativo Normale (2.5 min)* / Test Sensore (0) Funcionamiento Normal (2,5 min)* / Test de Paseo (0) Supervision 0-255 min (15 min*) Supervisione 0-255 min (15 min*) Supervisión 0-255 min (15 min*) LED Off / On* LED Off / On* LED Apagado / Encendido* 5 For more information refer to the Installer Guide. Per maggiori informazioni vedere la guida di Para más información, consulte el manual de installazione. instalación. Normal FR Paramètres configurés: PR Parâmetros do seteo: NL Geprogrammeerde parameters: 2.5 min. Paramètres Option Parâmetros Opção Geprogrammeerde Optie Sensibilité Faible/Elevé Sensibilidade Baixa* / Alta Gevoeligheid Hoog / Laag* Operation Normal (2.5 min)* / Test de marche (0) Operação Normal (2.5 min)*/Teste de Caminhada (0) * Bedrijfsmodus Normaal (2.5 min)* / Looptest (0) Surveillance 0-255 min (15 min*) Supervisão 0-255 min (15 min*) Controletijd 0-255 min (15 min*) LED Off / On* LED Desativado / Ativado* LED Uit / Aan* Pour plus d'informations, consultez le manuel * informações, consulte o guia de Para mais Raadpleeg de systeeminstallatiehandleiding voor meer d'installation. instalação do sistema. informatie. SE Parametrar som fastställts av system: Parametrar Option PIR-känslighet Hög / Låg* Operation Normal (2.5 min)* / Gångtest (0) Övervakningstid 0 - 255 minuter (15 min*) På* / Av A Lysdiod B C För mer information hänvisas till Installationsmanual. * = Factory Default 10a 10b If Risco determines in its reasonable discretion that any Product returned by customer conforms to the applicable warranty (“Non-Defective Products”), Risco will ft m notify the customer of such determination and will return the applicable Product to PIR - TOP VIEW ft m PIR Pet - TOP VIEW 30 9 8 customer at customer’s expense. In addition, Risco may propose and assess 25 customer a charge for testing and examination of Non-Defective Products. Entire 8 7 25 7 This equipment has been tested and found to Liability. The repair or replacement of products in accordance with this warranty 20 6 shall be Risco’s entire liability and customer’s sole and exclusive remedy in case a 20 6 comply with the limits for a Class B digital device, material defect in a product shall be discovered and reported as required herein. 5 5 15 pursuant to part 15 of the FCC Rules. Risco’s obligation and the Warranty are contingent upon the full payment by 4 customer for such Product and upon a proven weekly testing and examination of the 15 4 These limits are designed to provide reasonable product functionality. Limitations. The Product Warranty is the only warranty made 10 3 10 3 protection against harmful interference in a RTTE Compliance Statement by Risco with respect to the Products. The warranty is not transferable to any third 2 party. To the maximum extent permitted by applicable law, the Product Warranty 2 5 residential installation. This equipment generates Hereby, RISCO Group declares that this product is in does not apply and will be void if: (i) the conditions set forth above are not met 1 5 1 uses and can radiate radio frequency energy and, if compliance with the essential requirements and other relevant (including, but not limited to, full payment by customer for the product and a proven 0 0 weekly testing and examination of the product functionality); (ii) if the Products or 0 0 not installed and used in accordance with the provisions of Directive 1999/5/EC. The declaration of any part or component thereof: (a) have been subjected to improper operation or 1 1 5 instructions, may cause harmful interference to conformity may be consulted at www.riscogroup.com installation; (b) have been subject to neglect, abuse, willful damage, abnormal 5 2 working conditions, failure to follow Risco’s instructions (whether oral or in writing); 2 radio communications. However, there is no (c) have been misused, altered, modified or repaired without Risco’s written 10 3 10 3 guarantee that interference will not occur in a approval or combined with, or installed on products, or equipment of the customer or of any third party; (d) have been damaged by any factor beyond Risco’s 15 4 15 4 particular installation. If this equipment does cause Par la présente, RISCO Group déclare que cet accessoire est en reasonable control such as, but not limited to, power failure, electric power surges, 5 5 harmful interference to radio or television conformité avec les conditions essentielles et à d’autres or unsuitable third party components and the interaction of software therewith or (e) any delay or other failure in performance of the product attributable to any means of 20 6 20 6 reception, which can be determined by turning the dispositions appropriées de la directive 1999/5/EC. Pour communications, provided by any third party service provider (including, but not 25 7 25 7 equipment on and off, the user is encouraged to obtenir la copie complète de conformité, référez-vous à notre limited to) GSM interruptions, lack of or internet outage and/or telephony failure. 8 8 try to correct the interference by one or more of the site web : www.riscogroup.com BATTERIES ARE EXPLICITLY EXCLUDED FROM THE WARRANTY AND RISCO SHALL NOT BE HELD RESPONSIBLE OR LIABLE IN RELATION THERETO, AND THE ONLY 9 0 1 2 3 4 5 6 7 8 9 10 11 12 30 9 30 0 5 10 15 20 25 30 35 40 following measures: WARRANTY APPLICABLE THERETO, IF ANY, IS THE BATTERY MANUFACTURER'S 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 m WARRANTY. 0 5 10 15 20 25 30 35 40 45 50 ft ft m PIR Pet - SIDE VIEW 10 3 Reorient or relocate the receiving antenna. Risco makes no other warranty, expressed or implied, and makes no warranty of merchantability or of fitness for any particular purpose. For the sake of good order ft. m PIR - SIDE VIEW 10 3 2 Increase the separation between the and avoidance of any doubt: 2 5 1 equipment and the receiver. Standard Limited Product Warranty DISCLAIMER. EXCEPT FOR THE WARRANTIES SET FORTH HEREIN, RISCO AND ITS 5 LICENSORS HEREBY DISCLAIM ALL EXPRESS, IMPLIED OR STATUTORY, 1 0 Connect the equipment into an outlet on to RISCO Ltd., its subsidiaries and affiliates (“Risco") guarantee Risco’s hardware products to be free from defects in materials and workmanship when used and stored under normal conditions and in accordance with REPRESENTATIONS, WARRANTIES, GUARANTEES, AND CONDITIONS WITH REGARD TO THE PRODUCTS, INCLUDING BUT NOT LIMITED TO ANY REPRESENTATIONS, 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 m 0 1 2 3 4 5 6 7 8 9 10 11 12 m a different circuit from that to which the the instructions for use supplied by Risco, for a period of (i) 24 months from the date of connection to the WARRANTIES, GUARANTEES, AND CONDITIONS OF MERCHANTABILITY, FITNESS FOR 0 5 10 15 20 25 30 35 40 45 50 ft 0 5 10 15 20 25 30 35 40 ft receiver is connected. Risco Cloud (for cloud connected products) or (ii) 24 months from production (for other products which are non-cloud connected), as the case may be (each, the “Product Warranty Period” respectively). A PARTICULAR PURPOSE, TITLE AND LOSS OF DATA. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, RISCO AND ITS LICENSORS DO NOT REPRESENT Consult the dealer or an experienced radio/ Contact with customers only. This Product Warranty is solely for the benefit of the customer who purchased OR WARRANT THAT: (I) THE OPERATION OR USE OF THE PRODUCT WILL BE TIMELY, SECURE, UNINTERRUPTED OR ERROR-FREE; (ii) THAT ANY FILES, CONTENT OR TV technician for help. the product directly from Risco, or from any authorized distributor of Risco. Nothing in this Warranty obligates INFORMATION OF ANY KIND THAT MAY BE ACCESSED THROUGH THE PRODUCT BY Risco to accept product returns directly from end users that purchased the products for their own use from CUSTOMER OR END USER SHALL REMAIN SECURED OR NON DAMAGED. CUSTOMER Risco’s customer or from any installer of Risco, or otherwise provide warranty or other services to any such ACKNOWLEDGES THAT NEITHER RISCO NOR ITS LICENSORS CONTROL THE end user. Risco customer shall handle all interactions with its end users in connection with the Warranty, inter TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING THE INTERNET, This device complies with part 15 of the FCC Rules. Operation is alia regarding the Warranty. Risco’s customer shall make no warranties, representations, guarantees or GSM OR OTHER MEANS OF COMMUNICATIONS AND THAT RISCO’S PRODUCTS, MAY BE SUBJECT TO LIMITATIONS, DELAYS, AND OTHER PROBLEMS INHERENT IN THE USE subject to the following two conditions: statements to its customers or other third parties that suggest that Risco has any warranty or service obligation to, or any contractual privy with, any recipient of a product. OF SUCH MEANS OF COMMUNICATIONS. RISCO IS NOT RESPONSIBLE FOR ANY DELAYS, DELIVERY FAILURES, OR OTHER DAMAGE RESULTING FROM SUCH PROBLEMS. RISCO WARRANTS THAT ITS PRODUCTS DO NOT, TO THE BEST OF ITS Return Material Authorization. In the event that a material defect in a product shall be discovered and reported KNOWLEDGE, INFRINGE UPON ANY PATENT, COPYRIGHT, TRADEMARK, TRADE (1) This device may not cause harmful interference, and during the Product Warranty Period, Risco shall, at its option, and at customer's expense, either: (i) accept SECRET OR OTHER INTELLECTUAL PROPERTY RIGHT IN ANY EVENT RISCO SHALL return of the defective Product and repair or have repaired the defective Product, or (ii) accept return of the NOT BE LIABLE FOR ANY AMOUNTS REPRESENTING LOST REVENUES OR PROFITS, defective Product and provide a replacement product to the customer. The customer must obtain a Return PUNITIVE DAMAGES, OR FOR ANY OTHER INDIRECT, SPECIAL, INCIDENTAL, OR (2) This device must accept any interference received, including Material Authorization (“RMA”) number from Risco prior to returning any Product to Risco. The returned CONSEQUENTIAL DAMAGES, EVEN IF THEY WERE FORESEEABLE OR RISCO HAS BEEN INFORMED OF THEIR POTENTIAL. interference that may cause undesired operation. product must be accompanied with a detailed description of the defect discovered (“Defect Description”) and must otherwise follow Risco’s then-current RMA procedure in connection with any such return. Risco does not install or integrate the product in the end user security system and is therefore not responsible for and cannot guarantee the performance of the end user Changes or modifications to this equipment which are not expressly Contacting RISCO Group security system which uses the product. Risco does not guarantee that the product will prevent any personal injury or property loss by burglary, robbery, fire or approved by the party responsible for compliance (RISCO Groupʹs.) RISCO Group is committed to customer service and product support. You can contact us through our website www.riscogroup.com or as follows: otherwise; or that the product will in all cases provide adequate warning or could void the userʹs authority to operate the equipment. United Kingdom Spain Belgium Poland Israel protection. Customer understands that a correctly installed and maintained alarm may only reduce the risk of burglary, robbery or fire without warning, but is not an Tel: +44-161-655-5500 Tel: +34-91-490-2133 Tel: +32-2522 7622 Tel: +48-22-500-28-40 Tel: +972-3963-7777 assurance or a guarantee that such an event will not occur or that there will be no technical@riscogroup.co.uk support-es@riscogroup.com support-be@riscogroup.com support-pl@riscogroup.com support@riscogroup.com personal injury or property loss as a result thereof. Consequently Risco shall have no liability for any personal injury, property damage or loss based on a claim that the product fails to give warning. No employee or representative of Risco is Italy France USA China authorized to change this warranty in any way or grant any other warranty. Tel: +39-02-66590054 Tel: +33-164-73-28-50 Tel: +1-631-719-4400 Tel: +86-21-52-39-0066 support@riscogroup.it support-fr@riscogroup.com support-usa@riscogroup.com support-cn@riscogroup.com © RISCO Group 08/2016 5IN2580


Document Created: 2016-08-23 12:53:04
Document Modified: 2016-08-23 12:53:04
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC