Test Report

FCC ID: JE4RWX74

Test Report

Download: PDF
FCCID_1393521

DATE: 02 December 2010 I.T.L. (PRODUCT TESTING) LTD. FCC Radio Test Report for Risco Ltd. Equipment under test: Wireless Two Way Beam Detector RWX7405 Written by: _____________________________ D. Shidlowsky, Documentation Approved by: _____________________________ A. Sharabi, Test Engineer Approved by: _____________________________ I. Raz, EMC Laboratory Manager This report must not be reproduced, except in full, without the written permission of I.T.L. (Product Testing) Ltd. This report relates only to items tested. Test Report E101652.00 Risco Ltd. Page 1 of 34 FCC ACC M Ver 1.1 05Mayl 2000

Measurement/Technical Report for Risco Ltd. Wireless Two Way Beam Detector RWX7405 FCC ID: JE4RWX74 This report concerns: Original Grant: x Class I change: Class II change: Equipment type: Part 15 Security/Remote Control Transceiver 47CFR15 Section 15231 (a-d) Measurement procedure used is ANSI C63.4-2003. Application for Certification Applicant for this device: prepared by: (different from "prepared by") Ishaishou Raz Nimrod Herman ITL (Product Testing) Ltd. Risco Ltd. Kfar Bin Nun 14 Hachoma St., D.N. Shimshon 99780 Rishon Le’ Tzion 75655 Israel Israel e-mail Sraz@itl.co.il Tel: +972-3 -963-7777 Fax: +972-3-961-6584 e-mail: NimrodH@riscogroup.com Test Report E101652.00 Risco Ltd. Page 2 of 34 FCC ACC M Ver 1.1 05Mayl 2000

TABLE OF CONTENTS 1. GENERAL INFORMATION ------------------------------------------------------------------------------- 4 1.1 Administrative Information ................................................................................. 4 1.2 List of Accreditations ......................................................................................... 5 1.3 Product Description ........................................................................................... 6 1.4 Test Methodology .............................................................................................. 6 1.5 Test Facility ....................................................................................................... 6 1.6 Measurement Uncertainty ................................................................................. 6 2. SYSTEM TEST CONFIGURATION --------------------------------------------------------------------- 7 2.1 Justification ........................................................................................................ 7 2.2 EUT Exercise Software ..................................................................................... 7 2.3 Special Accessories .......................................................................................... 7 2.4 Equipment Modifications ................................................................................... 7 2.5 Configuration of Tested System ........................................................................ 7 3. TEST SET-UP PHOTO------------------------------------------------------------------------------------- 8 4. AVERAGE FACTOR CALCULATION ----------------------------------------------------------------- 9 4.1 Test Instrumentation Used .............................................................................. 10 5. PERIODIC OPERATION ---------------------------------------------------------------------------------11 5.1 Specification .................................................................................................... 11 5.2 Requirements .................................................................................................. 11 5.3 Results............................................................................................................. 11 6. FIELD STRENGTH OF FUNDAMENTAL ------------------------------------------------------------14 6.1 Test Specification ............................................................................................ 14 6.2 Test Procedure ................................................................................................ 14 6.3 Measured Data ................................................................................................ 14 6.4 Test Instrumentation Used, Field Strength of Fundamental ........................... 18 7. RADIATED EMISSION, 9 KHZ – 30 MHZ -----------------------------------------------------------19 7.1 Test Specification ............................................................................................ 19 7.2 Test Procedure ................................................................................................ 19 7.3 Measured Data ................................................................................................ 19 7.4 Test Instrumentation Used, Radiated Measurements .................................... 20 7.5 Field Strength Calculation ............................................................................... 20 8. SPURIOUS RADIATED EMISSION -------------------------------------------------------------------21 8.1 Test Specification ............................................................................................ 21 8.2 Test Procedure ................................................................................................ 21 8.3 Test Data ......................................................................................................... 22 8.4 Test Instrumentation Used, Radiated Measurements .................................... 24 9. BANDWIDTH ------------------------------------------------------------------------------------------------25 9.1 Test procedure ................................................................................................ 25 9.2 Results table .................................................................................................... 26 9.3 Test Equipment Used. ..................................................................................... 27 10. 11. APPENDIX A - CORRECTION FACTORS -----------------------------------------------------28 10.1 Correction factors for CABLE ......................................................................... 28 10.2 Correction factors for CABLE ......................................................................... 29 10.3 Correction factors for CABLE ......................................................................... 30 12.6 Correction factors for LOG PERIODIC ANTENNA ........................................ 31 10.4 Correction factors for LOG PERIODIC ANTENNA ........................................ 32 10.5 Correction factors for BICONICAL ANTENNA ............................................... 33 10.6 Correction factors for ACTIVE LOOP ANTENNA ........................................... 34 Test Report E101652.00 Risco Ltd. Page 3 of 34 FCC ACC M Ver 1.1 05Mayl 2000

1. General Information 1.1 Administrative Information Manufacturer: Risco Ltd. Manufacturer's Address: 14 Hachoma St. Rishon Le T’zion 75655 Israel Tel: +972-3-963-7777 Fax: +972-3-961-6584 Manufacturer's Representative: Nimrod Herman Equipment Under Test (E.U.T): Wireless Two Way Beam Detector Equipment Model No.: RWX7405 Equipment Serial No.: Not Designated Date of Receipt of E.U.T: 19/10/10 Start of Test: 19/10/10 End of Test: 24/10/10 Test Laboratory Location: I.T.L (Product Testing) Ltd. Kfar Bin Nun, ISRAEL 99780 Test Specifications: FCC Part 15 Subpart C Test Report E101652.00 Risco Ltd. Page 4 of 34 FCC ACC M Ver 1.1 05Mayl 2000

1.2 List of Accreditations The EMC laboratory of I.T.L. is accredited by the following bodies: 1. The American Association for Laboratory Accreditation (A2LA) (U.S.A.), Certificate No. 1152.01. 2. The Federal Communications Commission (FCC) (U.S.A.), Registration No. 90715. 3. The Israel Ministry of the Environment (Israel), Registration No. 1104/01. 4. The Voluntary Control Council for Interference by Information Technology Equipment (VCCI) (Japan), Registration Numbers: C-1350, R-1285. 5. Industry Canada (Canada), File No. IC 4025. 6. TUV Product Services, England, ASLLAS No. 97201. I.T.L. Product Testing Ltd. is accredited by the American Association for Laboratory Accreditation (A2LA) and the results shown in this test report have been determined in accordance with I.T.L.'s terms of accreditation unless stated otherwise in the report. Test Report E101652.00 Risco Ltd. Page 5 of 34 FCC ACC M Ver 1.1 05Mayl 2000

1.3 Product Description The RWX7405 is a 2-way 433.92 MHz wireless active IR beam detector. The detector is made of two parts: IR transmitter and IR receiver. Each part is composed of a master PCB and a number of slaves (1 slave was in each part of the tested units) inside a metal tube with a plastic cover. All masters and slaves are small PCBs each powered by one CR123A lithium battery. The RF transmitter is located in IR receiver master unit RWX7405 uses 2-way RF communication. 1.4 Test Methodology Radiated testing were performed according to the procedures in ANSI C63.4: 2003. Radiated testing was performed at an antenna to EUT distance of 3 meters. 1.5 Test Facility The radiated emissions tests were performed at I.T.L.’s testing facility at Kfar Bin-Nun, Israel. This site is a FCC listed test laboratory (FCC Registration No. 90715, date of listing September 06, 2009). I.T.L.’s EMC Laboratory is also accredited by A2LA, certificate No. 1152.01. 1.6 Measurement Uncertainty Radiated Emission The Open Site complies with the ±4 dB Normalized Site Attenuation requirements of ANSI C63.4-2003. In accordance with Paragraph 5.4.6.1 of this standard, this tolerance includes instrumentation calibration errors, measurement technique errors, and errors due to site anomalies. Test Report E101652.00 Risco Ltd. Page 6 of 34 FCC ACC M Ver 1.1 05Mayl 2000

2. System Test Configuration 2.1 Justification The E.U.T. was placed on a table in typical installation position, operating in continuous transmission. 2.2 EUT Exercise Software "Configuration Software" written by RISCO and is used to control and configure the operation of the panel (which used for communicating with the detector). 2.3 Special Accessories No special accessories were needed. 2.4 Equipment Modifications No modifications were needed in order to achieve compliance 2.5 Configuration of Tested System Figure 1. Configuration of Tested System Test Report E101652.00 Risco Ltd. Page 7 of 34 FCC ACC M Ver 1.1 05Mayl 2000

3. Test Set-up Photo Figure 2. Radiated Emission Test Test Report E101652.00 Risco Ltd. Page 8 of 34 FCC ACC M Ver 1.1 05Mayl 2000

4. Average Factor Calculation 1. Burst duration =60 msec 2. Time between bursts = >100msec ⎡ Pulse duration burst duration ⎤ 3. Average Factor = 20 log ⎢ × × Num of burst within 100msec⎥ ⎣ Pulse period 100msec ⎦ ⎡ 1 60 ⎤ Average Factor = 20 log ⎢ × ×1 = −10.45dB ⎣ 2 100 ⎥⎦ NOTE – [Pulse duration /Pulse period] considered ½ as worst case since unit operates with random ON/OFF keying modulation Figure 3. Burst duration within 200msec Test Report E101652.00 Risco Ltd. Page 9 of 34 FCC ACC M Ver 1.1 05Mayl 2000

4.1 Test Instrumentation Used Instrument Manufacturer Model Serial Number Calibration Period Spectrum HP 8592L 3906A00276 November 10, 2009 1 Year Analyzer Antenna 3705A00248 November 10, 2009 1 Year ARA BCD 235/B Bioconical Antenna August 1, 2010 ARA LPD-2010/A 1041 1 year Log Periodic Antenna-Log March 24, 2010 A.H.System SAS-200/511 1038 1 year Periodic Antenna Mast ARA AAM-4A 1001 N/A N/A Turntable ARA ART-1001/4 1001 N/A N/A Mast & Table ARA ACU-2/5 1001 N/A N/A Controller Test Report E101652.00 Risco Ltd. Page 10 of 34 FCC ACC M Ver 1.1 05Mayl 2000

5. Periodic Operation 5.1 Specification F.C.C., Part 15, Subpart C, Section 15.231(a) 5.2 Requirements Requirement Rationale Verdict Continuous transmissions are not permitted. N/A Complies A manually operated transmitter shall be N/A Complies deactivated within not more than 5 seconds after releasing the switch. An automatically operated transmitter shall See Figure 4. Complies cease operation within 5 seconds after activation. Periodic transmissions at regular N/A Complies predetermined intervals are not permitted. Polling or supervised transmissions to See Figure 5. Complies determine system integrity of transmitter used in security or safety applications shall not exceed more than 2 seconds per hour. 5.3 Results JUDGEMENT: Passed The EUT met the FCC Part 15, Subpart C, Section 15.231(a) specification requirements. TEST PERSONNEL: Tester Signature: __________________ Date: 02.12.10 Typed/Printed Name: A. Sharabi Test Report E101652.00 Risco Ltd. Page 11 of 34 FCC ACC M Ver 1.1 05Mayl 2000

Periodic Operation E.U.T Description Wireless Two Way Beam Detector Type RWX7405 Serial Number: Not Designated Specification: F.C.C., Part 15, Subpart C, 15.231(a) Figure 4. Automatic transmission within 5 seconds Test Report E101652.00 Risco Ltd. Page 12 of 34 FCC ACC M Ver 1.1 05Mayl 2000

Periodic Operation E.U.T Description Wireless Two Way Beam Detector Type RWX7405 Serial Number: Not Designated Specification: F.C.C., Part 15, Subpart C, 15.231(a) Figure 5. System Integrity (In one hour 60msecX4 (once every 15min) <2000msec) Test Report E101652.00 Risco Ltd. Page 13 of 34 FCC ACC M Ver 1.1 05Mayl 2000

6. Field Strength of Fundamental 6.1 Test Specification F.C.C., Part 15, Subpart C, Section 15.231(b) 6.2 Test Procedure The E.U.T. operation mode and test set-up are as described in Section 3. The E.U.T. was placed on a non-conductive table, 0.8 meters above the O.A.T.S. ground plane. The EMI receiver was set to the E.U.T. Fundamental Frequency (433.92MHz) and Peak Detection. The turntable and antenna mast were adjusted for maximum level reading on the EMI receiver. The measurement was performed for vertical and horizontal polarizations of the test antenna. The average result is: Peak Level(dBμV/m) + E.U.T. Duty Cycle Factor, in 100msec time window (dB) 6.3 Measured Data JUDGEMENT: Passed by 0.66 dB The EUT met the FCC Part 15, Subpart C, Section 15.231(b) specification requirements. The details of the highest emissions are given in Figure to Figure . TEST PERSONNEL: Tester Signature: __________________ Date: 02.12.10 Typed/Printed Name: A. Sharabi Test Report E101652.00 Risco Ltd. Page 14 of 34 FCC ACC M Ver 1.1 05Mayl 2000

Field Strength of Fundamental E.U.T Description Wireless Two Way Beam Detector Type RWX7405 Serial Number: Not Designated Specification: F.C.C., Part 15, Subpart C, 15.231(b) Antenna Polarization: Horizontal/Vertical Test Distance: 3 meters Detector: Peak Peak Average AVG AVG Freq. Pol. Margin Reading Factor Result Specification (MHz) V/H (dBµV/m) (dB) (dBµV/m) (dBµV/m) (dB) 433.92 V 90.62 -10.45 80.17 80.83 -0.66 433.92 H 69.69 -10.45 59.24 80.83 -21.59 Figure 6. Field Strength of Fundamental. Antenna Polarization: HORIZONTAL/VERTICAL. Detector: Peak Notes: 1. Margin refers to the test results obtained minus specified requirement; thus a positive number indicates failure, and a negative result indicates that the product passes the test. 2. “Peak Reading.” (dBµV/m) included the “Correction Factors”. 3. “Correction Factors” (dB) = Test Antenna Correction Factor(dB) + Cable Loss. 4. “Average Result” (dBµV/m)=Peak Reading (dBµV/m)+ Average Factor (dB) Test Report E101652.00 Risco Ltd. Page 15 of 34 FCC ACC M Ver 1.1 05Mayl 2000

Field Strength of Fundamental E.U.T Description Wireless Two Way Beam Detector Type RWX7405 Serial Number: Not Designated Specification: F.C.C., Part 15, Subpart C, 15.231(b) Antenna Polarization: Horizontal Test Distance: 3 meters Detector: Peak Figure 7. Field Strength of Fundamental. Antenna Polarization: HORIZONTAL. Detectors: Peak Test Report E101652.00 Risco Ltd. Page 16 of 34 FCC ACC M Ver 1.1 05Mayl 2000

Field Strength of Fundamental E.U.T Description Wireless Two Way Beam Detector Type RWX7405 Serial Number: Not Designated Specification: F.C.C., Part 15, Subpart C, 15.231(b) Antenna Polarization: Vertical Test Distance: 3 meters Detector: Peak Figure 8. Field Strength of Fundamental. Antenna Polarization: VERTICAL. Detector: Peak Test Report E101652.00 Risco Ltd. Page 17 of 34 FCC ACC M Ver 1.1 05Mayl 2000

6.4 Test Instrumentation Used, Field Strength of Fundamental Instrument Manufacturer Model Serial Number Calibration Period EMI Receiver HP 85422E 3906A00276 November 10, 2009 1 year RF Section HP 85420E 3705A00248 November 10, 2009 1 year Antenna March 24, 2010 ARA LPD-2010/A 1038 1 year Log Periodic Antenna Mast ARA AAM-4A 1001 N/A N/A Turntable ARA ART-1001/4 1001 N/A N/A Mast & Table ARA ACU-2/5 1001 N/A N/A Controller Printer HP LaserJet 2200 JPKGC19982 N/A N/A Test Report E101652.00 Risco Ltd. Page 18 of 34 FCC ACC M Ver 1.1 05Mayl 2000

7. Radiated Emission, 9 kHz – 30 MHz 7.1 Test Specification 9 kHz-30 MHz, FCC, Part 15, Subpart C, Section 209 7.2 Test Procedure The E.U.T. operation mode and test set-up are as described in Section 3. A preliminary measurement to characterize the E.U.T was performed inside the shielded room at a distance of 3 meters, using peak detection mode and broadband antennas. The preliminary measurements produced a list of the highest emissions. The E.U.T was then transferred to the open site, and placed on a remote-controlled turntable. The E.U.T was placed on a non-metallic table, 0.8 meters above the ground. The configuration tested is shown in Figure 3.1. The frequency range 9 kHz-30 MHz was scanned. The emissions were measured using a computerized EMI receiver complying to CISPR 16 requirements. The specification limits and applicable correction factors are loaded to the receiver via a 3.5" floppy disk. In the frequency range 9 kHz-30MHz, the loop antenna was rotated on its vertical axis. The antenna height (center of loop) was 1 meter at a distance of 10 meters. The E.U.T. was operated at the frequency of 433.92 kHz. This frequency was measured using a peak detector. 7.3 Measured Data JUDGEMENT: Passed The EUT was tested and it met the requirements of the FCC Part 15, Subpart C, specification. No emission TEST PERSONNEL: Tester Signature: _________________ Date: 02.12.10 Typed/Printed Name: A. Sharabi Test Report E101652.00 Risco Ltd. Page 19 of 34 FCC ACC M Ver 1.1 05Mayl 2000

7.4 Test Instrumentation Used, Radiated Measurements Instrument Manufacturer Model Serial Number Calibration Period EMI Receiver HP 85422E 3906A00276 November 10, 2009 1 year RF Section HP 85420E 3705A00248 November 10, 2009 1 year Active Loop EMCO 6502 9506-2950 October 19, 2010 1 year Antenna Antenna Mast ARA AAM-4A 1001 N/A N/A Turntable ARA ART-1001/4 1001 N/A N/A Mast & Table ARA ACU-2/5 1001 N/A N/A Controller 7.5 Field Strength Calculation The field strength is calculated directly by the EMI Receiver software, and a "Correction Factors" data disk, using the following equation: FS = RA + AF + CF FS: Field Strength [dBμv/m] RA: Receiver Amplitude [dBμv] AF: Receiving Antenna Correction Factor [dB/m] CF: Cable Attenuation Factor [dB] No external pre-amplifiers are used. Test Report E101652.00 Risco Ltd. Page 20 of 34 FCC ACC M Ver 1.1 05Mayl 2000

8. Spurious Radiated Emission 8.1 Test Specification 30 - 4340 MHz, F.C.C., Part 15, Subpart C 8.2 Test Procedure The E.U.T. operation mode and test set-up are as described in Section 3. See Section 3.1 Justification of the System Test Configuration concerning the E.U.T. orientation for this test. A preliminary measurement to characterize the E.U.T was performed inside the shielded room at a distance of 3 meters, using peak detection mode and broadband antennas. The preliminary measurements produced a list of the highest emissions. The E.U.T was then transferred to the open site, and placed on a remote-controlled turntable. The E.U.T was placed on a non-metallic table, 0.8 meters above the ground. The configuration tested is shown in Figure 1. The signals from the list of the highest emissions were verified and the list was updated accordingly. The levels of the emissions within the frequency ranges of the restricted bands (Section 15.205 of FCC Part 15) were compared to the limits of the table in Section 15.209 (a), General Requirements. The emissions were measured using a computerized EMI receiver complying to CISPR 16 requirements. The specification limits and applicable correction factors are loaded to the receiver via a 3.5" floppy disk. In the frequency range 2.9 – 4.34 GHz, a spectrum analyzer including a low noise amplifier was used. During peak measurements, the I.F. bandwidth was 1 MHz, and video bandwidth 3 MHz. During average measurements, the I.F. bandwidth was 1 MHz and video bandwidth was 100 Hz. The readings were maximized by adjusting the antenna height between 1-4 meters, the turntable azimuth between 0-360°, and the antenna polarization. Verification of the E.U.T emissions was based on the following methods: turning the E.U.T on and off; using a frequency span less than 10 MHz; observation of the signal level during turntable rotation. (Background noise is not affected by the rotation of the E.U.T.) The emissions were measured at a distance of 3 meters. Test Report E101652.00 Risco Ltd. Page 21 of 34 FCC ACC M Ver 1.1 05Mayl 2000

8.3 Test Data JUDGEMENT: Passed by 19.7 dB The EUT met the requirements of the F.C.C. Part 15, Subpart C, specification. The margin between the emission level and the specification limit was 19.71 dB in the worst case at the frequency of 867.84 MHz, vertical polarization. TEST PERSONNEL: Tester Signature: __________________ Date: 02.12.10 Typed/Printed Name: A. Sharabi Test Report E101652.00 Risco Ltd. Page 22 of 34 FCC ACC M Ver 1.1 05Mayl 2000

Radiated Emission E.U.T Description Wireless Two Way Beam Detector Type RWX7405 Serial Number: Not Designated Specification: FCC Part 15, Subpart C Antenna Polarization: Horizontal/Vertical Frequency range: 30 MHz to 4340 MHz Antenna: 3 meters distance Detectors: Peak, Quasi-peak Peak Average Average Antenna Frequency Specification Margin Reading Factor Result Polarity (MHz) (dBµV/m) (dBµV/m) (H/V) (dBµV/m) (dB) 867.84 51.57 -10.45 41.12 V 60.83 -19.71 1301.77 46.98 -10.45 36.53 V 60.83 -24.30 1735.56 51.35 -10.45 40.9 V 60.83 -19.93 2169.96 53.95 -10.45 23.5 V 60.83 -37.33 Figure 9. Radiated Emission. Antenna Polarization: VERTICAL. Detectors: Peak, Quasi-peak Notes: 1. Margin refers to the test results obtained minus specified requirement; thus a positive number indicates failure, and a negative result indicates that the product passes the test. 2. “Peak Reading.” (dBµV/m) included the “Correction Factors”. 3. “Correction Factors” (dB) = Test Antenna Correction Factor(dB) + Cable Loss. 4. “Average Result” (dBµV/m)=Peak Reading (dBµV/m)+ Average Factor (dB) Test Report E101652.00 Risco Ltd. Page 23 of 34 FCC ACC M Ver 1.1 05Mayl 2000

8.4 Test Instrumentation Used, Radiated Measurements Instrument Manufacturer Model Serial Number Calibration Period EMI Receiver HP 85422E 3906A00276 November 10, 2009 1 year RF Section HP 85420E 3705A00248 November 10, 2009 1 year Low Noise DBS LNA-DBS- 013 January 13, 2010 1 Year Amplifier MICROWAVE 0411N313 Spectrum HP 8592L 3826A01204 March 14, 2010 1 Year Analyzer Antenna August 1, 2010 ARA BCD 235/B 1041 1 year Bioconical Antenna March 24, 2010 ARA LPD-2010/A 1038 1 year Log Periodic Antenna-Log January 29, 2009 A.H.System SAS-200/511 253 2 year Periodic Antenna Mast ARA AAM-4A 1001 N/A N/A Turntable ARA ART-1001/4 1001 N/A N/A Mast & Table ARA ACU-2/5 1001 N/A N/A Controller Printer HP LaserJet 2200 JPKGC19982 N/A N/A Test Report E101652.00 Risco Ltd. Page 24 of 34 FCC ACC M Ver 1.1 05Mayl 2000

9. Bandwidth 9.1 Test procedure The transmitter unit operated with normal modulation. The spectrum analyzer was set to 120 kHz resolution BW and center frequency of the transmitter fundamental. The spectrum bandwidth of the transmitter unit was measured and recorded. The BW was measured at 20 dBc points. The EUT was set up as shown in Figure 1, and its proper operation was checked. The transmitter occupied bandwidth was measured with the EMI receiver as frequency delta between reference points on the modulation envelope. Figure 10 Center Frequency Test Report E101652.00 Risco Ltd. Page 25 of 34 FCC ACC M Ver 1.1 05Mayl 2000

9.2 Results table E.U.T Description: Wireless Two Way Beam Detector Model: RWX7405 Serial Number: Not Designated Specification: F.C.C. Part 15, Subpart C: (15.231(c)) Bandwidth Specification Margin Reading (1) (kHz) (kHz) 505 1084 -579 Figure 11 Bandwidth JUDGEMENT: Passed by 579 kHz TEST PERSONNEL: Tester Signature: __________________ Date: 02.12.10 Typed/Printed Name: A. Sharabi (1) 0.25% of the E.U.T. fundamental frequency, Section 15.231(c). Test Report E101652.00 Risco Ltd. Page 26 of 34 FCC ACC M Ver 1.1 05Mayl 2000

9.3 Test Equipment Used. Bandwidth Instrument Manufacturer Model Serial Number Calibration Period EMI Receiver HP 85422E 3906A00276 November 10, 2009 1 year RF Section HP 85420E 3705A00248 November 10, 2009 1 year Antenna March 24, 2010 1 year ARA LPD-2010/A 1038 Log Periodic Antenna Mast ARA AAM-4A 1001 N/A N/A Turntable ARA ART-1001/4 1001 N/A N/A Mast & Table ARA ACU-2/5 1001 N/A N/A Controller Printer HP LaserJet 2200 JPKGC19982 N/A N/A Figure 12 Test Equipment Used Test Report E101652.00 Risco Ltd. Page 27 of 34 FCC ACC M Ver 1.1 05Mayl 2000

10. 11. APPENDIX A - CORRECTION FACTORS 10.1 Correction factors for CABLE from EMI receiver to test antenna at 3 meter range. FREQUENCY CORRECTION FREQUENCY CORRECTION FACTOR FACTOR (MHz) (dB) (MHz) (dB) 10.0 0.3 1200.0 7.3 20.0 0.6 1400.0 7.8 30.0 0.8 1600.0 8.4 40.0 0.9 1800.0 9.1 50.0 1.1 2000.0 9.9 60.0 1.2 2300.0 11.2 70.0 1.3 2600.0 12.2 80.0 1.4 2900.0 13.0 90.0 1.6 100.0 1.7 150.0 2.0 200.0 2.3 250.0 2.7 300.0 3.1 350.0 3.4 400.0 3.7 450.0 4.0 500.0 4.3 600.0 4.7 700.0 5.3 800.0 5.9 900.0 6.3 1000.0 6.7 NOTES: 1. The cable type is RG-214. 2. The overall length of the cable is 27 meters. 3. The above data is located in file 27MO3MO.CBL on the disk marked "Radiated Emission Tests EMI Receiver". Test Report E101652.00 Risco Ltd. Page 28 of 34 FCC ACC M Ver 1.1 05Mayl 2000

10.2 Correction factors for CABLE from EMI receiver to test antenna at 3 meter range. FREQUENCY CORRECTION FACTOR (GHz) (dB) 1.0 1.2 2.0 1.6 3.0 2.0 4.0 2.4 5.0 3.0 6.0 3.4 7.0 3.8 8.0 4.2 9.0 4.6 10.0 5.0 12.0 5.8 NOTES: 1. The cable type is RG-8. 2. The overall length of the cable is 10 meters. Test Report E101652.00 Risco Ltd. Page 29 of 34 FCC ACC M Ver 1.1 05Mayl 2000

10.3 Correction factors for CABLE from spectrum analyzer to test antenna above 2.9 GHz FREQUENCY CORRECTION FREQUENCY CORRECTION FACTOR FACTOR (GHz) (dB) (GHz) (dB) 1.0 1.9 14.0 9.1 2.0 2.7 15.0 9.5 3.0 3.5 16.0 9.9 4.0 4.2 17.0 10.2 5.0 4.9 18.0 10.4 6.0 5.5 19.0 10.7 7.0 6.0 20.0 10.9 8.0 6.5 21.0 11.2 9.0 7.0 22.0 11.6 10.0 7.5 23.0 11.9 11.0 7.9 24.0 12.3 12.0 8.3 25.0 12.6 13.0 8.7 26.0 13.0 NOTES: 1. The cable type is SUCOFLEX 104 E manufactured by SUHNER. 2. The cable is used for measurements above 2.9 GHz. 3. The overall length of the cable is 10 meters. Test Report E101652.00 Risco Ltd. Page 30 of 34 FCC ACC M Ver 1.1 05Mayl 2000

12.6 Correction factors for LOG PERIODIC ANTENNA Type LPD 2010/A at 3 and 10 meter ranges. Distance of 3 meters Distance of 10 meters FREQUENCY AFE FREQUENCY AFE (MHz) (dB/m) (MHz) (dB/m) 200.0 9.1 200.0 9.0 250.0 10.2 250.0 10.1 300.0 12.5 300.0 11.8 400.0 15.4 400.0 15.3 500.0 16.1 500.0 15.6 600.0 19.2 600.0 18.7 700.0 19.4 700.0 19.1 800.0 19.9 800.0 20.2 900.0 21.2 900.0 21.1 1000.0 23.5 1000.0 23.2 NOTES: 1. Antenna serial number is 1038. 2. The above lists are located in file number 38M3O.ANT for a 3 meter range, and file number 38M100.ANT for a 10 meter range. 3. The files mentioned above are located on the disk marked "Radiated Emission Test EMI Receiver". Test Report E101652.00 Risco Ltd. Page 31 of 34 FCC ACC M Ver 1.1 05Mayl 2000

10.4 Correction factors for LOG PERIODIC ANTENNA Type SAS-200/511 at 3 meter range. FREQUENCY ANTENNA FREQUENCY ANTENNA FACTOR FACTOR (GHz) (dB) (GHz) (dB) 1.0 24.9 7.0 38.6 1.5 27.8 7.5 39.2 2.0 29.9 8.0 39.9 2.5 31.2 8.5 40.4 3.0 32.8 9.0 40.8 3.5 33.6 9.5 41.1 4.0 34.3 10.0 41.7 4.5 35.2 10.5 42.4 5.0 36.2 11.0 42.5 5.5 36.7 11.5 43.1 6.0 37.2 12.0 43.4 6.5 38.1 12.5 44.4 13.0 44.6 NOTES: 1. Antenna serial number is 253. 2. The above lists are located in file number SAS3M0.ANT for a 3 meter range. 3. The files mentioned above are located on the disk marked "Antenna Factors". Test Report E101652.00 Risco Ltd. Page 32 of 34 FCC ACC M Ver 1.1 05Mayl 2000

10.5 Correction factors for BICONICAL ANTENNA Type BCD-235/B, at 3 meter range FREQUENCY AFE (MHz) (dB/m) 20.0 19.4 30.0 14.8 40.0 11.9 50.0 10.2 60.0 9.1 70.0 8.5 80.0 8.9 90.0 9.6 100.0 10.3 110.0 11.0 120.0 11.5 130.0 11.7 140.0 12.1 150.0 12.6 160.0 12.8 170.0 13.0 180.0 13.5 190.0 14.0 200.0 14.8 210.0 15.3 220.0 15.8 230.0 16.2 240.0 16.6 250.0 17.6 260.0 18.2 270.0 18.4 280.0 18.7 290.0 19.2 300.0 19.9 310 20.7 320 21.9 330 23.4 340 25.1 350 27.0 NOTES: 1. Antenna serial number is 1041. 2. The above list is located in file 19BC10M1.ANT on the disk marked "Radiated Emissions Tests EMI Receiver". Test Report E101652.00 Risco Ltd. Page 33 of 34 FCC ACC M Ver 1.1 05Mayl 2000

10.6 Correction factors for ACTIVE LOOP ANTENNA Model 6502 S/N 9506-2950 Magnetic Electric FREQUENCY Antenna Antenna Factor Factor (MHz) (dB) (dB) .009 -35.1 16.4 .010 -35.7 15.8 .020 -38.5 13.0 .050 -39.6 11.9 .075 -39.8 11.8 .100 -40.0 11.6 .150 -40.0 11.5 .250 -40.0 11.6 .500 -40.0 11.5 .750 -40.1 11.5 1.000 -39.9 11.7 2.000 -39.5 12.0 3.000 -39.4 12.1 4.000 -39.7 11.9 5.000 -39.7 11.8 10.000 40.2 11.3 15.000 -40.7 10.8 20.000 -40.5 11.0 25.000 -41.3 10.2 30.000 42.3 9.2 Test Report E101652.00 Risco Ltd. Page 34 of 34 FCC ACC M Ver 1.1 05Mayl 2000


Document Created: 2010-12-02 15:42:26
Document Modified: 2010-12-02 15:42:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC