EM4025 Description

FCC ID: JE4KCLP

Operational Description

Download: PDF
FCCID_280026

                EM MICROELECTRONIC - MARIN SA                                           EM4025
                                                                                        EM4125
               Read Only Contactless Identification Device
                           with Anticollision
Features                                              Description
• Anticollision protocol to identify a number of      The EM4025 is a CMOS integrated circuit for use in
  transponders (better then 20 tags/s at RF/32, 10    electronic Read Only RF Transponders, often
  tags/s at RF/64)                                    known as a RFID Tag. The circuit is powered by an
• 55 bit memory array, laser programmable ROM         external coil placed in an electromagnetic field, and
• Two mask programmable data rate options:            gets its clock via the coil terminals. The fixed code
  RF/64 and RF/32                                     device identification is programmed at manufacture
• Data transmission reader to transponder: ASK        by laser fusing of polysilicon links. The chip starts
  100% (OOK)                                          at power up in a quiet mode. Downlink
• Data transmission transponder to reader: ASK,       Transmission occurs only on command from the
  Manchester Code                                     reader,       normally      as     part     of     the
• On chip resonance capacitor                         anticollision/arbitration scheme. A data rate of 64 or
• On chip supply buffer capacitor & voltage limiter   32 periods of the carrier frequency per data bit is
                                                      available. Downlink Data is Manchester Coded.
• Large Modulation Depth
                                                      Only an external coil is needed to obtain the chip
• Operating frequency 100 – 150 kHz
                                                      function. A parallel resonant capacitor is integrated.
• Small chip size convenient for implantation

                                                      The EM4125 is the same device but with large
Typical Applications                                  bumps (Mega Pads) as indicated on the last page
                                                      of this data sheet. All specified parameters and
•   Logistics                                         description are applicable for the EM4125 device
•   Manufacturing Automation                          except resonant capacitor.
•   Anti-counterfeiting
•   Industrial transponder
•   Tracking and tracing                              Typical Operating Configuration




                                                                              COIL1


                                                              L                       EM4025

                                                                              COIL2




                                                            L: typical 20.78 mH value for fO = 125 KHz

                                                                                                  Fig. 1




Copyright  2002, EM Microelectronic-Marin SA         1                             www.emmicroelectronic.com



Document Created: 2002-06-24 08:39:43
Document Modified: 2002-06-24 08:39:43

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC