Module approval request letter

FCC ID: J9C-65VE240P1

Cover Letter(s)

Download: PDF
FCCID_880552

Qualcomm J9C-65VE240P2 Request for transmitter modular approval Transmitter Module Characteristics Item Requirements EUT 1 Have its own RF shielding Device is equipped with metal shielding to cover RF section. Refer to external photos 2 Have buffered modulation/data inputs (if such All inputs to the modules inputs are provided), are buffered through logic or microprocessor inputs. 3 Have it own power supply regulation Internal 1.8V power regulator. Refer to Block diagram in the theory of operations 4 Meet the antenna requirements of Section Device is equipped with 15.203 unique antenna ( u.FL(v)- LP-040) connector. Refer to external photos 5 Be tested in a stand-alone configuration, i.e., the Refer to setup photos. antenna, AC or DC power and data input/output lines must be connected to the module but, the module must not be inside another case during testing 6 Be labeled with its own FCC ID number, and if Two proposed FCC ID the FCC ID is not visible when the module is label format are included installed inside another device, then the outside in the filing. One label will of the device into which the module is installed be placed on the module. must also display a label referring to the The other label will be enclosed module. placed on the outside of the system. Refer to FCC ID label format and location exhibit and user manual. 7 The modular transmitter is manufactured so that Refer to “Product the user cannot influence the operation of the Specification and Modular transmitter that will operate outside of the scope Installation” Exhibit of the regulations. 8 Compliance with RF exposure requirements is Refer to “Product the responsibility of the grantee and will be Specification and Modular addressed for all final host configurations. Installation” Exhibit


Document Created: 2007-12-04 10:59:29
Document Modified: 2007-12-04 10:59:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC