SAR Test Exclusion

FCC ID: IYZTB1

RF Exposure Info

Download: PDF
FCCID_4211015

D-PL-12076-01-03 SAR Test exclusion documentation according to FCC KDB 447498, RSS-102 and EN 62479 Report identification number: 1-7290/18-01-06 Certification numbers and labeling requirements FCC ID IYZTB1 IC number 2701A-TB1 HVIN (Hardware Version Identification Number) TB1 PMN (Product Marketing Name) TB1 FVIN (Firmware Version Identification Number) -/- HMN (Host Marketing Name) -/- This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: DN: cn=Thomas Vogler, o=CTC advanced GmbH, ou=VOG-161125, email=thomas.vogler@ctcadvanced.com, c=DE Datum: 2019.03.19 15:06:47 +01'00' Thomas Vogler Lab Manager Radio Communications & EMC Page 1 of 2

EUT technologies: Technologies: Max. rated power: (AVG) Max. gain: Min. pathloss: Bluetooth LE Declared: max 0 dBm 3.3 dBi 0 dB (if applicable) Note: Bluetooth LE test results see section 11 of CTC advanced test report 1-6795/18-01-02 SAR test exclusion according to KDB447498 ( General RF Exposure Guidance) Equation from Chapter 4.3.1: Standalone SAR test exclusion considerations page 11 and ff. (1) Standalone SAR test exclusion for 100 MHz to 6 GHz at test separation distances ≤ 50mm ( Threshold1-g;10-g ) × dseperation / f 0.5 where Threshold1-g;10-g is 3 for 1-g; 7.5 for 10-g dseperation is the min. test separation distance; 5mm is used if the distance is less f is the RF channel transmit frequency The table below gives the calculated maximal power that could be used for source based time averaged conducted or radiated power, adjusted for tune up tolerance. If this is at or below the calculated value the DUT is exempted from SAR evaluation. f in [MHz] dseparation [mm] Threshold1-g Powerlimit [mW] Pmax-declared [mW] Exclusion 2450.00 5 3 9.58 2.14 yes SAR test exclusion according to RSS-102 Issue 5 Section 2.5.1/Table 1 The table below gives the calculated maximal power that could be used for source based time averaged conducted or radiated power, adjusted for tune up tolerance. If this is at or below the calculated value the DUT is exempted from SAR evaluation. f in [MHz] dseparation [mm] tissue volume Powerlimit [mW] Pmax-declared [mW] Exclusion 2450.00 5 1g 4.00 2.14 yes SAR test exclusion according to EN 62479 Compliance is given according to EN 62479 because the output power of the DUT is smaller than 20 mW. Page 2 of 2


Document Created: 2019-03-19 15:06:47
Document Modified: 2019-03-19 15:06:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC