RF Exposure Info

FCC ID: IYZ-AK01

RF Exposure Info

Download: PDF
FCCID_4014571

D-PL-12076-01-03 BNetzA-CAB-02/21-102 SAR Test exclusion documentation according to FCC KDB 447498, RSS-102 Report identification number: 1-5579/17-01-03 Exclusion FCC_IC Product: AK01 contains the module with the following certification numbers FCC ID IYZ-AK01 IC number 2701A-AK01 HVIN (Hardware Version Identification Number) AK01 PMN (Product Marketing Name) AK01 FVIN (Firmware Version Identification Number) -/- HMN (Host Marketing Name) -/- This report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: cn=Alexander Hnatovskiy, o=CTC advanced GmbH, ou=HNA-161129, email=Alexander.Hnatovskiy@ctcadvanced.co m, c=DE 2018.08.29 10:48:05 +02'00' Alexander Hnatovskiy Lab Manager Radio Communications & EMC

Test report no.: 1-5579/17-01-03 EUT technologies: Technologies: Max. rated power: (AVG) Max. gain: Min. pathloss: Proprietary Declared max: -14.0 dBm <0 dBi 0 dB (if applicable) 260 to 470MHz Note: Declared max taken from customer info: AK01 technical Description 2014-05-23 (measured maximum EIRP: -17.1 dBm, less than declared value) SAR test exclusion according to KDB447498 (General RF Exposure Guidance v06) Equation from Chapter 4.3.1: Standalone SAR test exclusion considerations page 11 and ff. (1) Standalone SAR test exclusion for 100 MHz to 6 GHz at test separation distances ≤ 50mm ( Threshold1-g;10-g ) × dseperation / f 0.5 where Threshold1-g;10-g is 3 for 1-g; 7.5 for 10-g dseperation is the min. test separation distance; 5mm is used if the distance is less f is the RF channel transmit frequency The table below gives the calculated maximal power that could be used for source based time averaged conducted or radiated power, adjusted for tune up tolerance. If this is at or below the calculated value the DUT is exempted from SAR evaluation. frequency dseparation Powerlimit Pmax-declared Threshold1-g Exclusion [MHz] [mm] [mW] [dBm] [mW] 260.00 5 3 29.42 -14.00 0.04 yes 433.00 5 3 22.80 -14.00 0.04 yes 460.00 5 3 22.12 -14.00 0.04 yes SAR test exclusion according to RSS-102 Issue 5 Section 2.5.1/Table 1 The table below gives the calculated maximal power that could be used for source based time averaged conducted or radiated power, adjusted for tune up tolerance. If this is at or below the calculated value the DUT is exempted from SAR evaluation. frequency dseparation Powerlimit Pmax-declared tissue volume Exclusion [MHz] [mm] [mW] [dBm] [mW] 260.00 5 1g 4.00 -14.00 0.04 yes 433.00 5 1g 4.00 -14.00 0.04 yes 460.00 5 1g 4.00 -14.00 0.04 yes © CTC advanced GmbH Page 2 of 2


Document Created: 2018-08-29 10:48:05
Document Modified: 2018-08-29 10:48:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC