6

FCC ID: IW2PREMIOMTP6D

Test Report

Download: PDF
FCCID_72081

FCC PART 15 CLASS B EMI MEASUREMENT AND TEST REPORT FOR PREMIO COMPUTER, INC. 938 Radecki Court, City of Industry, CA 91748 Model: PREMIOMTP6D July 22, 1998 This Report Concerns: Equipment Type: [X] Original Report Pentium® II Mid—Tower System — Personal Computer, ITE Test Engineer: Thomas Huang Test Date: July 15, 1998 Certified By: /)C%» (;/_/' John Y. Chan — Director, Compliance Engineering Prepared By: Bay Area Compliance Laboratory Corporation 230 Commercial Street, Suite 2 Sunnyvale, CA 94086 (408) 732—9162 Note: This report may not be duplicated without prior written consent of Bay Area Compliance Laboratory Corporation. This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government.

PREMIO COMPUTER, INC. FCC ID: IW2PREMIOMTP6D TABLE OF CONTENTS 1 — GENERAL INFORMATION enovnscccnnmemnence e eorvevveearenvevseessnreeerenserecevennenenevesseetcesenensvercesentenvevencenercorscverserecs 4 1.1 Propuct DescRiption For EquIPMENTt UnDER Test (EUT) . 1.2 OBJECTIVE: ... .. 1.3 RELATED SUBMITTAL(S}/GRANT(S). 1.4 TEST METHODOLOGY, ...z 1.5 TEST FACIUITY............ 1.6 Test EQUIPMENT LIST 1.7 EQurMeNT UnpeR Test (EUT) .. 1.8 EUT ConFiouratTion List DETAILs .. 1.9 SUPPORT EQUEPMENT ............ 1.10 ExtERNAL O CaBLiNG .. 2 — SYSTEM TEST CONFIGURATION:.2,0.0000000040000000 0000094 revvearerrevvervevseneneverveeverereceseerversereese seveervereeveseccenencerveree 7 2.1 JUSTIFICATION .........clclclllkl 2.2 EUT ExERCiIsE SOFTWARE. 2.3 Sprctat AccrssortEs 2.4 BLOCK DIAGRAM..... 2.5 ConFiguraTion or TEsT SYsSTEM 2.6 TEsT SETUP BLOCK DIAGRAM .. 2.7 EQUIPMENT MODIFICATIONS..... 3 — CONDUCTED EMISSIONS TEST DATA ...... 000202000 ee0rrererevereersverenrmersece eorvennrervervesecernnree sreevevensnncerssecccecces 11 3.1 MEASUREMENT UNCERTAINTY. 3.2 EUT SETUP ... ... 3.3 SPECTRUM ANALYZER SETUP 3.4 TEST PROCEDURE ............. 3.5 SuMmaRY or TEsT ResULTS. 3.6 CONDUCTED EMIsSIONS TEST DATA 3.7 Puor or CoNDUCTED Emisslons TEST DATA 4 — RADIATED EMISSION DATA. 4.1 MEASUREMENT UNCERTAINTY .. 4.2 EUT SETUP .... 4.3 SPECTRUM ANALYZER SETUP 4.4 TEST PROCEDURE ............... 4.5 CORRECTED AMPLITUDE & MARGIN CaLCULATION 4.6 SUmmaRy or TEsT ResuLTs.. 4.7 RADIATED Emissions TEST REsULT DATA 5—FCC PRODUCT LABELING AND WARNING STATEMEN 5.1 PROPOSED FCC LABEL FORMAT ........0....0ce enc 5.2 PROPOSED LABEL LOCATION ON EUT . 5.3 FCC WARNING STATEMENT................ 6 — CONDUCTED AND RADIATED SETUP PHOTOGRAPHS. 6.1 CONDUCTED EMISSION PHOTOGRAPH —— FRONT VIEW............... 6.2 CoNDUCTED EMISSION PHOTOGRAPH — REAR VIEW.... 6.3 RaDraTED Emission PHotoGkarH — Front View . 6.4 RaDIATED EmisSION PHOTOGRAPH — REAR VIEW ... 7 — EUT PHOTOGRAPHS ....... .4 122. ccnea60eesreeverveereerrereeenenreevsesernnenrerrreneenvervenreencevenrrererrnncerverne renrereensereennrnenernennne 22 7.1 EUT — FronT View.. 7.2 EUT — REAR ViEw ... 7.3 EUT — Insipe FRONT BEZEL .. 7.4 EUT — Leet Sipe ViEw wiTk CovER REMOVED . 7.5 Power SUPPLY — Sibe View wITH LABEL............ 7.6 Powser SUPPLY— CovER REMOYED, COMPONENT VIEW ... Report #19807142.doc FCC DoC Class B Report Page 2 of 33

PREMIO COMPUTER, INC. FCC ID: IW2PREMIOMTP6D 7.7 POWER SUPPLY — CIRCUIT VIEW n2.2n2, 0000000000060 en en e e en en en rrenerervervveeenen en venerrveveeenene mm neneneevene cce 28 7.8 MOTHERBOARD — COMPONENT ViEW .. .. 29 7.9 MOTHERBOARD + CIRCUIT VIBW ..........2. nenevere vnen rnrern ins 30 APPENDIX A — EUT BLOCK DIAGRAM (NOT AVAILABLE AT TIME OF TEST).......un00 eneeneveeernnsneeversereree 31 APPENDIX B — PLOT OF CONDUCTED EMISSION TEST DATA .....c.ccccooeccccnmmmmnenceeerrererenrenrerenvececrmninee 32 APPENDIX C — USER MANUAL................... eevvrvermevrrernenearrererverererereeteenrenceverrenvervevevererenereses eennensnerensavenecncerece 33 Report #19807142.doc FCC DoC Class B Report Page 3 of 33

PREMIO COMPUTER, INC. FCC ID: IW2PREMIOMTP6D 1 — GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) The PREMIO COMPUTER, Inc., model PREMIOMTP6D or the "EUT" as referred to in this report is a Mid—Tower personal computer measuring 9.525°L x 7.5"W, which features the Premio Computer PREMIO 212F Motherboard. The system board utilizes the Intel 82440LX/82440EX chipset with Ultra 1O controller. * The four—layered motherboard supports Intel Pentium® II processors from 200 to 333 MHz with integrated VRM, and is provided with a frequency synthesizer chip for CPU clock selection. The motherboard conforms to the MICRO— ATX form factor footprint. It has on—board support for four IDE hard drives, one floppy drives, one parallel port, two serial ports, two USB ports, PS/2 mouse and keyboard connectors. * Other Motherboard features include Mode 0—4 PCI IDE; 3.3V unbuffered EDO (Extended Data Output) and SDRAM memory. Cache support for 512K in CPU support. « Peripheral expansion capability includes two (2) 32—bit PCI slots, two (2) 16—bit ISA slots {one (1) shared PCI/ISA slot), and two (2) 168—pin DIMM memory socket. * The EUT also includes a Mid—Tower chassis with plastic front bezel. The Mid—Tower chassis provides for eight (8) half—height bays (three (3) exposed 3.5 inch drive bays, and two (2) exposed 5.25 inch drive bays), and a 200 Watt ATX power supply. + Additionally, the EUT was equipped with one (1) 3.5" floppy drive, one (1) 5.257 floppy drive. 1.2 Objective This Class B report is prepared on behalf of PREMIO COMPUTER, Inc. in accordance with Part 2, Subpart J, and Part 15, Subparts A and B of the Federal Communication Commissions rules and to ICES— 003 ofthe Canadian Interference—Causing Equipment Regulations. The objective of the manufacturer is to demonstrate compliance with FCC Class B limits for conducted and radiated margin and to ICES—003 requirements for Information Technology Equipment. 1.3 Related Submittal(s)/Grant(s) No Related Submittals 1.4 Test Methodology All measurements contained in this report were conducted with ANSI €63.4 —1992, American National Standard for Mcthods of Measurement of Radio—Noise Emissions from Low—Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz. All radiated and conducted emissions measurement was performed at Bay Area Compliance Laboratory, Corp. The radiated testing was performed at an antenna—to—EUT distance of 3 meters. Report #19807142.doc FCC DoC Class B Report Page 4 of 33

PREMIO COMPUTER, INC. rFCC D: IwzrrREnnOMINPCGS 1.5 Test Facility The Open Area Test site used by Bay Area Compliance Laboratory Corporation to collect radiated and conducted emission measurement data is located in the back parking lot of the building at 230 Commercial Street, Suite 2, Sunnyvale, California, USA. Test sites at Bay Area Compliance Laboratory Corporation has been fully described in reports submitted to the Federal Communication Commission (FCC) and Voluntary Control Council for Interference (VCCI). The details of these reports has been found to be in compliance with the requirements of Section 2.948 of the FCC Rules on February 11 and December 10, 1997 and Article 8 of the VCCI regulations on December 25, 1997. The facility also complies with the radiated and AC line conducted test site criteria set forth in ANSI €63.4—1992. The Federal Communications Commission and Voluntary Control Council for Interference has the reports on file and is listed under FCC file 31040/8IT 1300F2 and VCCI Registration No.: C—674 and R—657. The test sites has been approved by the FCC and VCCI for public use and is listed in the FCC Public Access Link (PAL) database. Additionally, Bay Area Compliance Laboratory Corporation is a National Institute of Standards and Technology (NIST) accredited laboratory, under the National Voluntary Laboratory Accredited Program (NVLAP). The scope of the accreditation covers the FCC Method — 47 CFR Part 15 — Digital Devices, IEC/CISPR 22: 1993, and AS/NZS 3548: Electromagnetic Interference — Limits and Methods of Measurement ofInformation Technology Equipment test methods under NVLAP Lab Code 200167. 1.6 Test Equipment List :Magufac_tlgrer _|. Description . . Model _ Number_|___Data___ HP Spectrum Analyzer 8568B 2610402165 216199 HP Spectrum Analyzer 8593B 2919400242 3/20/99 HP Amplificr $349B 264402662 3/20799 HP Quasi—Peak Adapter 85650A 917059 276199 HP Amplifier $447E 193701046 276799 AH. System Hormm Antenna $AS02007/571 261 2727799 Com—Power Log Periodic Antenna AL—100 16005 1/2/99 Com—Power Biconical Antenna AB—100 14012 12799 Solar Electronics LISN 8012—50—R—24—BNC 968447 3/28/99 Com—Power LISN L1—200 12208 12/20/98 Com—Power LISN L1—200 12005 12720798 BACL Data Entry Software DESI 0001 12/20/98 Report #19807142.doc FCC DoC Class B Report Page 5 of 33

PREMIO COMPUTER, INC. FCC ID: IW2PREMIOMTP6GD 1.7 Equipment Under Test (EUT) l2 — l . Serial [ [..,. Mannfaqtymr ’De’sfmpt:m Model Number _|_ FCC ID l Pentium" II PREMIO . IW2 COMPUTER, Inc. Mlsd-Tower PREMIOMTP6D M9806070721 PREMIOMTPGD ystem 1.8 EUT Configuration List Details Manufacturer Description Model____| SerialNumber |_ ECC IB_ Premio Motherboard 212F M9806070721 None PREMIO Power Supply TG—2006B 7464109 None TEAC 3.5" Floppy Drive FD—235HF 6247068 None N/A Chassis Mid Tower None None 1.9 Support Equipment ‘Manufacturer Description Model Serial Number _|____FCEID____ Compaq Keyboard 104 WN BO3C80A39E4G6K AQ6—MTN4IZ15DIP Compaq Mouse MUSIJ B01920H67E007 11 EMJIMUSJJ C‘t‘zi“tg’v““h Printer LSP—10 5047999—92 DLK66TLSP—10 ViewSonic Monitor 705A 1912600348 FVI7O35AC1 EVEREX Modem EV—945 None E3ESUVEV—945 Labtec Speaker 1 Pair SS—11 None None GE Tape 3053808 None None TELEX Microphone None None None AH. Systems Joystick None None None 1.10 External 1/O Cabling Cable Description Lzlr\n{[g)th Port/From \ufe . Shielded Keyboard Cable 1.6. Keyboard Port/EUT Compaq Keyboard Unshielded mouse cable _| 2.0 Mouse Port/EUT Compaq mouse__| Shielded Printer Cable Z?Q ”Parallel/EUT _ Citizen Printer _ Shielded Serial Cable 1.5 [ Serial 1/EUT EVEREX Modem Shielded USB Cablex2 1.5 USB Ports/EUT Terminators Shielded Video Cable 1.8 Video Out Port/EUT Viewsonic Monitor Shielded Audio Cable 1.5 Audio Out Port/EUT Speakers Shielded Audio Cable 1.0 Audio in Port/EUT Tape Unshiclded Cable 1.5 Line in Port/EUT MIC Shielded Cable 1.0 Game Port/EUT Joystick Report #19807142.doc FCC DoC Class B Report Page 6 of 33

PREMIO COMPUTER, INC. FCC ID: IW2PREMIOMTP6GD 2 — SYSTEM TEST CONFIGURATION 2.1 Justification The system was configured for testing in a typical fashion (as normally used by a typical user). The following /O ports were provided by the motherboard: two serial ports, one parallel port, two USB port, one PS/2 keyboard port, one PS/2 mouse port, one floppy interface connector, and one IDE interface connectors. The CD—ROM drive provideds the audio out jack and the Network card provide the AUX, BNC and RJ45 TP connector. The parallel port (LPT1), two serial ports (COM! and COM2), PS/2 mouse and keyboard ports, two USB ports, TP port, BNC port, and audio jack were also tested along with a 200 Watt power supply. Since the fundamental frequency is the same with all processor speeds, 66MHz BUS in this case, the EUT was tested with the Intel Pentium® II 333MHz CPU to represent worst case results. The BUS and processor speeds were achieved by installing the appropriate processor and changing the jumper settings on the motherboard. Following is the supported BUS and processor speeds: Intel Pentium® II: 66 MHz BUS for 333MHz processor. 2.2 EUT Exercise Software The EUT exercising program used during radiated and conducted testing was designed to exercise the various system components in a manner similar to a typical use. The software, GWBASIC 2Modem, contained on the hard drive, is started in a DOS window under the Windows 95 operating system. Once loaded, the program sequentially exercises each system component. The sequence used is as follows: 1) Lines of Hs scrolis across the VGA monitor 2) The printer outputs Hs 3) The two modems receive Hs 4) Send a signal to the two USB cables, which were terminated by a 100 ohms resistor. The complete cycle takes approximately 5 — 10 seconds and the process is continuously repeated. 2.3 Special Accessories As shown in section 2.5, all interface cables used for compliance testing are shielded as normally supplied by INMAC, Y.C. Cable, Monster Cable and from their respective support equipment manufacturers. The printer, the modem and VGA monitor featured shielded metal connectors. 2.4 Block Diagram There is not block diagram available at the time of testing. The system has only one full speed. In the full—speed mode, the 14.3MHz crystal on the motherboard drives the frequency synthesizer to produce the 66MHz BUS clock to the CPU and other components on the motherboard. Internally, the CPU is running at 333MHz. Report #19807142.doc FCC DoC Class B Report Page 7 of 33

PREMIO COMPUTER, INC. FCC ID: IW2PREMIOMTP6D 2.6 Test Setup Block Diagram EUT Power Cord 1/O Cables | Draped and Bundied V if Necessary LISN1 Peripheral Periphcral Power Cords \; Power Cords 4 LISN2 D D RearofHost Systend Peripherals are Flushed with Rear and Sicks of 4 Table Top. _3 15— 5 CL] <> <—I [ frape| 10 . 10 1 em VGA Printer om MOCMO ... * Monitor EUT T0 PREMIOMIP6GD Lcm D em 10 em 10 Speaker J om ( § Non—Conducting Thblc — — fi 80 cmAbove Grounf Plane Foystick 10 m Mouse e > > (Flushedwith Microphone 10 KEYBOARD 10 back ofKeyboerd) (Flushed with Front of Table Top) m cm ———————————————— 15 Mtas e Report # 19807142.doc FCC DoC Class B Report Page 9 of 33

PREMIO COMPUTER, INC. FCC ID: IW2PREMIOMTPGD 2.7 Equipment Modifications No modification(s) to the EUT were necessary to comply with the applicable limits: Report # 19807142.doc FCC DoC Class B Report Page 10 of 33

PREMIO COMPUTER, INC. FCC ID: IW2PREMIOMTP6D 3 — CONDUCTED EMISSIONS TEST DATA 3.1 Measurement Uncertainty All measurements involve certain levels of uncertainties, especially in field of EMC. The factors contributing to uncertainties are spectrum analyzer, cable loss, and LISN. Based on NIS 81, The Treatment of Uncertainty in EMC Measurements, the best estimate of the uncertainty of any conducted emissions mcasurement at BACL is +2.4 dB. 3.2 EUT Setup The measurement was performed at the Open Area Test Site, using the same setup per ANSI C63.4 — 1992 measurement procedure. Specification used was with the FCC Class B limits. The EUT was connected to a 110 VAC / 60 Hz power source and it was placed center and the back edge of the test table. The VGA monitor and the tape were placed on one side of EUT, printer and the modem were on the other side. A pair of speakers was placed directly in front of the printer and the modem. The rear of the EUT and peripherals were placed flushed with the rear of the tabletop. The keyboard was placed directly in front of the EUT, flushed with the front of the tabletop. The PS/2 mouse and the joystick were place next to the keyboard on one side, the Microphone was on the other side. The mouse was flushed with the back of the keyboard. The spacing between the peripherals was 10 centimeters. Input / Output cables were draped over edge ofthe test table and bundle when necessary. 3.3 Spectrum Analyzer Setup The spectrum analyzer was set with the following configurations during the conducted emission test: Start Frequency... Stop Frequency Sweep Speed .. IF Bandwidth.. Video Bandwidth Quasi—Peak Adapter B dth ... Quasi—Peak Adapter Mode ........... 3.4 Test Procedure During the conducted emission test, the EUT power cord was connected to the auxtliary outlet ofthe first LISN with the VGA monitor and all support equipment power cords connected to the second. Since the fundamental frequency ii g the same with all processor speeds, 66MHz BUS in this case, the EUT was tested using the Intel Pentium® II 333 MHz CPU with the PREMIO (TG—2006—B) 200 Watt power supply to represent worst case results for the final qualification test. Therefore, these results were used for final test data recorded in the table listed under section 3.6 of this report. Maximizing procedure was performed on the six (6) highest emissions to ensure EUT compliance using all installation combination. All data was recorded in the peak detection mode. Quasi—peak readings were only performed when an emission was found to be marginal (less than —4 dBuV). Quasi—peak readings are distinguished with a "Qp". Report #19807142.doc FCC DoC Class B Report Page 11 of 33

PREMIO COMPUTER, INC. FCC ID: IW2PREMIOMTPGD 3.5 Summary of Test Results According to the data in section 3.6, the EUT complied with the FCC Conducted margin for a Class B device and these test results is deemed satisfactory evidence of compliance with ICES—003 of the Canadian Interference—Causing Equipment Regulations, with the wors? margin reading of. ~1.6 dBuV at 0.570 MHz in the Line mode for the PREMIO, TG—2006—B power supply 3.6 Conducted Emissions Test Data 3.6.1 Final Test Data for PREMIO Power Slfi,flly’ model TG—2006—B with Intel Pentium® II 333 MHz CPU, 0.45 — 30 MHz. LINE CONDUCTED Emissions FEC CLass B 0.570 46.4 aP Line 48 ~1.6 0.570 46.4 aP Neutral 48 —1.6 13.630 45.5 aP Line 48 —2.5 13.630 45.0 aP Neutral 48 —3.0 15.340 38.2 aP Neutral 48 —9.8 15.520 35.0 aP Line 48 —13.0 3.7 Plot of Conducted Emissions Test Data Plot of Conducted Emissions test data for the PREMIO power supply, model TG—2006—B with Intel Pentium® II 333 MHz processor is presented in Appendix B of this report as reference. Report # 19807142.doc FCC DoC Class B Report Page 12 of 33

PREMIO COMPUTER, INC. FCC ID: IW2PREMIOMTP6GD 4 — RADIATED EMISSION DATA 4.1 Measurement Uncertainty All measurements involve certain levels of uncertainties, especially in field of EMC. The factors contributing to uncertainties are spectrum analyzer, cable loss, antenna factor calibration, antenna directivity, antenna factor variation with height, antenna phase center variation, antenna factor frequency interpolation, measurement distance variation, site imperfections, mismatch (average), and system repeatability. Based on NIS 81, The Treatment of Uncertainty in EMC Measurements, the best estimate of the uncertainty of a radiation emissions measurement at BACL is +4.0 dB. 4.2 EUT Setup The radiated emission tests were performed in the open area 3 metertest site, using the setup in accordance with the ANSI €63.4 — 1992. The specification used was the FCC Class B limits. The EUT was connected to a 110 VAC / 60 Hz power source and it was placed center and the back edge of the test table. The VGA monitor and the tape were placed on one side of EUT, printer and the modem were on the other side. A pair of speakers was placed directly in front of the printer and the modem. The rear of the EUT and peripherals were placed flushed with the rear of the tabletop. The keyboard was placed directly in front of the EUT, flushed with the front of the tabletop. The PS/2 mouse and the joystick were place next to the keyboard on one side, the Microphone was on the other side. The mouse was flushed with the back of the keyboard. The spacing between the peripherals was 10 centimeters. Input / Output cables were draped over edge of the test table and bundle when necessary. 4.3 Spectrum Analyzer Setup According to FCC Rules, 47 CFR 15.33, since the internal processor speed operates between 108—500 MHz, the system was tested to 2000 MHz. During the radiated emission test, the spectrum analyzer was set with the following configurations: Start Frequency ... Stop Frequency Sweep Speed .... IF Bandwidth ... Video Bandwidth ... Quasi—Peak Adapter Bandwidth ..... Quasi—Peak Adapter Mode ..... Resolution Bandwidth ........... Report # 19807142.doc FCC DoC Class B Report Page 13 of 33

PREMIO COMPUTER, INC. FCC ID: IW2PREMIOMTP6D 4.4 Test Procedure For the radiated emissionstest, both the EUT and VGA monitor and all support equipment power cords was connected to the AC floor outlet since the power supply (TG—2006—B) used in the EUT did not provide an accessory power outlet. Maximizing procedure was performed on the six (6) highest emissions to ensure EUT compliance is with all installation combinations. All data was recorded in the peak detection mode. Quasi—peak readings was performed only when an emission was found to be marginal (less than —4 dBuV), and are distinguished with a "Qp" in the data table. Since the fundamental frequency ii g the same with all processor speeds, 66MHz BUS in this case, the EUT was tested using the Intel Pentium® II 333 MHz CPU at 66 MHz BUS speed to represent worst case results for the final qualification test. . Therefore, these results were used for final test data recorded in the table listed under section 4.7 of this report as reference. The parallel port (LPT1}, two serial ports (COM1 and COM2), two USB ports, TP port, BNC port, PS/2 mouse and keyboard ports were also tested. 4.5 Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Factor, and subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows: Corr. Ampl. = Indicated Reading + Antenna Factor + Cable Factor — Amplifier Gain The "Margin" column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of —7dBuV means the emission is 7dBuV below the maximum limit for Class B. The equation for margin calculation is as follows: Margin = Corr, Ampl. — Class B Limit 4.6 Summary of Test Results According to the data in section 4.7, the EUT complied with the FCC Class B standards and these test results is deemed satisfactory evidence of compliance with ICES—003 ofthe Canadian Interference— Causing Equipment Regulations, and had the worst margin of. —9.4 dBuV at 312.05 MHz in the Vertical polarization with the Intel Pentium® II 333 MHz CPU at 66 MHz BUS. —8.4 dBuV at 312.05 MHz in the Vertical polarization with the Intel Pentium® II 333 MHz CPU at 66 MHz BUS — After Maximize procedure. Report # 19807142.doc FCC DoC Class B Report Page 14 of 33

PREMIO COMPUTER, INC. FCC ID: IW2PREMIOMTPGD 4.7 Radiated Emissions Test Result Data 4.7.1 Test Data for Intel Pentium® II 333 MHz CPU at 66 MHz BUS, 30 to 2000 MHz. INDICATED TABLE ANTENNA CoRRECTION Factor |CORRECTE FCC 312.05 40.7 270 1.8 13.2 5.7 23.0 36.6 46.0 —9.4 <|IJ I| <| <| TJ I| TJ <| <| TI) <| <| IJ<| I| I| <| I| <)| < 57.78 37.9 150 1.6 10.3 2.7 21.8 29.1 40.0 —10.9 312.05 37.5 270 1.3 14.2 5.7 23.0 34.4 46.0 —11.6 21219 32.1 270 1.8 17.3 4.9 224 31.9 43.5 —11.6 57.75 34.6 90 1.6 10.0 2.7 21.8 25.5 40.0 —14.5 504.08 29.9 270 1.8 17.5 7.5 23.6 31.3 46.0 —14.7 504.08 30.2 290 1.9 15.9 7.5 23.6 30.0 46.0 —16.0 21219 28.4 270 1.5 16.3 4.9 22.4 27.2 43.5 —16.3 360.04 31.1 250 1.5 14.3 6.5 22.5 29.4 46.0 —16.6 115.56 34.3 90 1.5 10.7 3.1 21.3 26.8 43.5 —~16.7 360.05 29.9 270 1.4 14.9 6.5 22.5 28.8 46.0 —17.2 455.97 29.0 300 1.8 15.8 74 23.5 28.7 46.0 —17.3 266.98 25.9 90 1.5 19.1 5.4 22.2 28.2 46.0 —17.8 288.84 25.1 80 1.8 19.7 5.6 22.3 28.1 46.0 ~17.9 336.05 29.7 90 1.6 14.4 6.1 22.6 27.6 46.0 —18.4 137.74 30.7 0 1.7 11.7 3.8 21.2 25.0 43.5 —18.5 137.49 29.9 120 1.2 11.8 3.8 21.2 24.3 43.5 —19.2 300.69 30.1 270 1.5 13.0 5.9 22.6 26.4 46.0 —19.6 266.98 25.3 0 1.6 17.8 5.4 22.2 26.3 46.0 —19.7 300.66 28.9 290 2.0 13.9 5.9 22.6 26.1 46.0 —19.9 327.97 28.7 250 1.6 13.5 6.0 22.7 25.5 46.0 —20.5 Report # 19807 142.doc FCC DoC Class B Report Page 15 of 33

PREMIO COMPUTER, INC. FCC ID: IW2PREMIOMTP6GD 4.7.2 Maximized Final Test Data for Intel Pentium® II 333 MHz CPU at 66 MHz BUS, 30 to 2000 MHz. INDICATED TABLE ANTENNA CorREcrioN Factor® —1CorRECts ECC 312.05 41.7 240 1.9 V 13.2 5.7 23.0 37.6 46.0 —8.4 57.78 38.8 300 3.2 V 10.3 2.7 21.8 30.0 40.0 —10.0 212.19 33.3 260 2.8 V 17.3 4.9 224 33.1 43.5 —10.4 312.05 38.1 270 1.5 H 14.2 5.7 23.0 35.0 46.0 —11.0 57.75 37.7 270 2.9 H 10.0 2.7 21.8 28.6 40.0 —11.4 504.08 31.5 0 1.7 H 17.5 7.5 23.6 32.9 46.0 —13.1 Report # 19807142.doc FCC DoC Class B Report Page 16 of 33

PREMIO CONIPUTER, INC. FCC ID: IW2PREMIOMTP6GD Appendix B — PLOT OF CONDUCTED EMISSION TEST DATA Report # 19807142.doc FCC DoC Class B Report Page 32 of 33

PREMIO PREMIOMTPED (PC SYSTEM) MKR 570 kHz ho REF 48.0 dBW ATTEN 9 dB 46. 40 dB_W ~7 T T T 10 dasB/ | | | ( J 1 - | U 1 : ; 1 . L LE T ] I | E | t—— . {—— |i | L | h SsTART 4509 ikHz sTOP 30.90 MHz RES BW 10 kHz VBW 30 kHz swWP 20 sec


Document Created: 2001-05-17 17:07:27
Document Modified: 2001-05-17 17:07:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC