IR5DK13

FCC ID

Equipment: Intel Wireless-AC 9260

MilDef Crete Inc. DK13

7F, No. 250, Sec 3, Pei Shen Rd, Shen Keng District,New Taipei City, N/A N/A Taiwan

Application
Frequency Range
Final Action Date
Granted
8cx7bNtGhuxmrNRkdNdyfA==
-
2020-05-20
APPROVED
C//opnL3+u05WCmjb916MA==
2402.0-2480.0
2020-05-20
APPROVED
OXDkv9zEQFsJAl5NVZqxmA==
5180.0-5240.0
2020-05-20
APPROVED
OXDkv9zEQFsJAl5NVZqxmA==
5190.0-5230.0
2020-05-20
APPROVED
OXDkv9zEQFsJAl5NVZqxmA==
5210.0-5210.0
2020-05-20
APPROVED
OXDkv9zEQFsJAl5NVZqxmA==
5260.0-5320.0
2020-05-20
APPROVED
OXDkv9zEQFsJAl5NVZqxmA==
5270.0-5310.0
2020-05-20
APPROVED
OXDkv9zEQFsJAl5NVZqxmA==
5290.0-5290.0
2020-05-20
APPROVED
OXDkv9zEQFsJAl5NVZqxmA==
5500.0-5700.0
2020-05-20
APPROVED
OXDkv9zEQFsJAl5NVZqxmA==
5510.0-5670.0
2020-05-20
APPROVED
OXDkv9zEQFsJAl5NVZqxmA==
5530.0-5690.0
2020-05-20
APPROVED
OXDkv9zEQFsJAl5NVZqxmA==
5745.0-5825.0
2020-05-20
APPROVED
OXDkv9zEQFsJAl5NVZqxmA==
5755.0-5795.0
2020-05-20
APPROVED
OXDkv9zEQFsJAl5NVZqxmA==
5775.0-5775.0
2020-05-20
APPROVED
nxMHmaGLHIk25j/tkkb3TQ==
2402.0-2480.0
2020-05-20
APPROVED
nxMHmaGLHIk25j/tkkb3TQ==
2412.0-2472.0
2020-05-20
APPROVED
nxMHmaGLHIk25j/tkkb3TQ==
2422.0-2462.0
2020-05-20
APPROVED
File NameDocument TypeDateDirect
9260NGW- LabelsmplID Label/Location Info 2020-05-20 00:00:00 pdf
9260NGW- LabelLocID Label/Location Info 2020-05-20 00:00:00 pdf
9260NGW- ExphoExternal Photos 2020-05-20 00:00:00 pdf
9260NGW- FCC Auth Ltr for Change of IDCover Letter(s) 2020-05-20 00:00:00 pdf
9260NGW- Declaration of authorizationCover Letter(s) 2020-05-20 00:00:00 pdf
9260NGW- Declaration letter for electrically identicalCover Letter(s) 2020-05-20 00:00:00 pdf
9260NGW- ATTESTATIONCover Letter(s) 2020-05-20 00:00:00 pdf

Application Details:

EquipmentIntel Wireless-AC 9260
FRN0011213410
Grantee CodeIR5
Product CodeDK13
Applicant BusinessMilDef Crete Inc.
Business Address7F, No. 250, Sec 3, Pei Shen Rd , Shen Keng District,New Taipei City,N/A Taiwan
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
TCB Email[email protected]
ApplicantWillie Liang – Manager
Applicant Phone 627
Applicant Fax886-2-2662-6079
Applicant Email[email protected]
Applicant MailStop
Test FirmIntel Corporation S.A.S.
Test Firm ContactNawfal ASRIH
Test Firm Phone
Test Firm Fax0033493001401
Test Firm Email[email protected]
Certified ByVincent Lin –
Comment [C//opnL3+u05WCmjb916MA==]: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [nxMHmaGLHIk25j/tkkb3TQ==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [OXDkv9zEQFsJAl5NVZqxmA==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC