Test Report_ANT+

FCC ID: IPH-B3697

Test Report

Download: PDF
FCCID_4394908

FCC Test Report FCC ID : IPH-B3697 Equipment : Watch and activity monitor Model No. : AB3697 Brand Name : GARMIN Applicant : Garmin International, Inc. Address : 1200 E. 151st Street Olathe, KS 66062 United States Standard : 47 CFR FCC Part 15.249 Received Date : May 28, 2019 Tested Date : Jul. 22 ~ Jul. 24, 2019 We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Assistant Manager Gary Chang / Manager Report No.: FR952804 Page : 1 of 29 Report Version: Rev. 01

Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 Local Support Equipment List ................................................................................................................ 7 1.3 Test Setup Chart .................................................................................................................................... 7 1.4 The Equipment List ................................................................................................................................ 8 1.5 Test Standards ....................................................................................................................................... 9 1.6 Deviation from Test Standard and Measurement Procedure................................................................. 9 1.7 Measurement Uncertainty ...................................................................................................................... 9 2 TEST CONFIGURATION ..................................................................................................................... 10 2.1 Testing Condition ................................................................................................................................. 10 2.2 The Worst Test Modes and Channel Details ....................................................................................... 10 3 TRANSMITTER TEST RESULTS ....................................................................................................... 11 3.1 Conducted Emissions........................................................................................................................... 11 3.2 Radiated Emission ............................................................................................................................... 14 3.3 20dB and Occupied Bandwidth ............................................................................................................ 28 4 TEST LABORATORY INFORMATION ............................................................................................... 29 Report No.: FR952804 Page : 2 of 29 Report Version: Rev. 01

Release Record Report No. Version Description Issued Date FR952804 Rev. 01 Initial issue Aug. 05, 2019 Report No.: FR952804 Page : 3 of 29 Report Version: Rev. 01

Summary of Test Results FCC Rules Test Items Measured Result [dBuV]: 0.779MHz 15.207 AC Power Line Conducted Emissions Pass 25.99 (Margin -20.01dB) - AV 15.249(a) Field Strength of Fundamental Meet the requirement of limit Pass Field Strength of Harmonics and Emissions 15.249(a)(d) Radiated outside of the Specified Frequency Meet the requirement of limit Pass Bands 15.215(c) 20dB bandwidth Meet the requirement of limit Pass 15.203 Antenna Requirement Meet the requirement of limit Pass Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Report No.: FR952804 Page : 4 of 29 Report Version: Rev. 01

1 General Description 1.1 Information The EUT comes in three different types of strap materials in the market. One is leather, another is metal, and the other is silicon. 1.1.1 Specification of the Equipment under Test (EUT) RF General Information Frequency Range Modulation Ch. Freq. (MHz) Channel Number Data Rate (MHz) 2402-2479 GFSK 2402-2479 1-78 [78] 1 Mbps 1.1.2 Antenna Details Ant. No. Type Gain (dBi) Connector Remark 1 Slot -4.07 N/A --- 1.1.3 Power Supply Type of Equipment under Test (EUT) 5Vdc from host Power Supply Type 3.8Vdc from battery 1.1.4 Accessories No. Equipment Description Brand: Garmin 1 Battery Model: 361-00130-00 Power Rating: 3.8Vdc, 66mAh Brand: Garmin 2 USB cable Model: 320-01069-10 Power Line: 0.52m shielded without core Report No.: FR952804 Page : 5 of 29 Report Version: Rev. 01

1.1.5 Channel List Frequency band (MHz) 2400~2483.5 Frequency Frequency Frequency Frequency Channel Channel Channel Channel (MHz) (MHz) (MHz) (MHz) 1 2402 21 2422 41 2442 61 2462 2 2403 22 2423 42 2443 62 2463 3 2404 23 2424 43 2444 63 2464 4 2405 24 2425 44 2445 64 2465 5 2406 25 2426 45 2446 65 2466 6 2407 26 2427 46 2447 66 2467 7 2408 27 2428 47 2448 67 2468 8 2409 28 2429 48 2449 68 2469 9 2410 29 2430 49 2450 69 2470 10 2411 30 2431 50 2451 70 2471 11 2412 31 2432 51 2452 71 2472 12 2413 32 2433 52 2453 72 2473 13 2414 33 2434 53 2454 73 2474 14 2415 34 2435 54 2455 74 2475 15 2416 35 2436 55 2456 75 2476 16 2417 36 2437 56 2457 76 2477 17 2418 37 2438 57 2458 77 2478 18 2419 38 2439 58 2459 78 2479 19 2420 39 2440 59 2460 --- --- 20 2421 40 2441 60 2461 --- --- 1.1.6 Test Tool and Duty Cycle Test Tool Hardware control, Version: 1750-4 Duty Cycle (%) Duty Factor (dB) Duty Cycle and Duty Factor 4.81 13.17 Report No.: FR952804 Page : 6 of 29 Report Version: Rev. 01

1.2 Local Support Equipment List Support Equipment List No. Equipment Brand Model FCC ID Remarks 1 Adapter Apple A1385 --- --- 1.3 Test Setup Chart Battery Mode Test Setup Diagram Charging Mode Test Setup Diagram Report No.: FR952804 Page : 7 of 29 Report Version: Rev. 01

1.4 The Equipment List Test Item Conducted Emission Test Site Conduction room 1 / (CO01-WS) Tested Date Jul. 22, 2019 Instrument Manufacturer Model No. Serial No. Calibration Date Calibration Until Receiver R&S ESR3 101657 Jan. 08, 2019 Jan. 07, 2020 LISN SCHWARZBECK Schwarzbeck 8127 8127-667 Nov. 05, 2018 Nov. 04, 2019 RF Cable-CON Woken CFD200-NL CFD200-NL-001 Oct. 23, 2018 Oct. 23, 2019 Measurement AUDIX e3 6.120210k NA NA Software Note: Calibration Interval of instruments listed above is one year. Test Item Radiated Emission Test Site 966 chamber 1 / (03CH01-WS) Tested Date Jul. 24, 2019 Instrument Manufacturer Model No. Serial No. Calibration Date Calibration Until Spectrum Analyzer R&S FSV40 101498 Dec. 27, 2018 Dec. 26, 2019 Receiver R&S ESR3 101658 Dec. 11, 2018 Dec. 10, 2019 Bilog Antenna SCHWARZBECK VULB9168 VULB9168-522 Jul. 12, 2019 Jul. 11, 2020 Horn Antenna SCHWARZBECK BBHA 9120 D BBHA 9120 D 1096 Dec. 18, 2018 Dec. 17, 2019 1G-18G Horn Antenna SCHWARZBECK BBHA 9170 BBHA 9170517 Nov. 15, 2018 Nov. 14, 2019 18G-40G Loop Antenna R&S HFH2-Z2 100330 Nov. 09, 2018 Nov. 08, 2019 Loop Antenna Cable KOAX KABEL 101354-BW 101354-BW Oct. 08, 2018 Oct. 07, 2019 Preamplifier EMC EMC02325 980225 Jul. 09, 2019 Jul. 08, 2020 Preamplifier Agilent 83017A MY39501308 Oct. 04, 2018 Oct. 03, 2019 Preamplifier EMC EMC184045B 980192 Aug. 09, 2018 Aug. 08, 2019 EMC104-SM-SM-80 RF Cable EMC 181106 Oct. 08, 2018 Oct. 07, 2019 00 RF Cable HUBER+SUHNER SUCOFLEX104 MY16019/4 Oct. 08, 2018 Oct. 07, 2019 RF Cable HUBER+SUHNER SUCOFLEX104 MY16014/4 Oct. 08, 2018 Oct. 07, 2019 EMCCFD400-NM-N LF cable 1M EMC 160502 Oct. 08, 2018 Oct. 07, 2019 M-1000 LF cable 3M Woken CFD400NL-LW CFD400NL-001 Oct. 08, 2018 Oct. 07, 2019 LF cable 10M Woken CFD400NL-LW CFD400NL-002 Oct. 08, 2018 Oct. 07, 2019 Measurement AUDIX e3 6.120210g NA NA Software Note: Calibration Interval of instruments listed above is one year. Report No.: FR952804 Page : 8 of 29 Report Version: Rev. 01

C International Certification Corp. 1.5 Test Standards According to the specification of EUT, the EUT must comply with following standards and KDB documents. 47 CFR FCC Part 15.249 ANSI C63.10—2013 1.6 Deviation from Test Standard and Measurement Procedure None 1.7 Measurement Uncertainty ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2) Measurement Uncertainty Parameters Uncertainty Bandwidth +34.130 Hz AC conducted emission +2.92 dB Radiated emission s 1GHz +3.41 dB Radiated emission > 1GHz +4.59 dB Report No.: FR952804 Page : 9 of 29 Report Version: Rev. 01

C International Certification Corp. 2 Test Configuration 2.1 Testing Condition Test Item Test Site Ambient Condition Tested By AC Conduction COO1—WS 25°C / 59% Alex Tsai . has o Roger Lu Radiated Emissions O3CHOT—WS 28°C / 63% Akun Chung > FCC Designation No.: TW2732 > FCC site registration No.: 181692 > ISED#: 10807A—1 > CAB identifier: TW2732 2.2 The Worst Test Modes and Channel Details , Test Frequency Test Test item Mode (MH2) Data Rate Configuration AC Power Line Conducted Emissions Charging ——— 2 Field Strength of Fundamental GFSK 2402, 2441, 2479 1 Mbps 1 GESK 2402 1 Mbps 1 Radiated Emissions S 1GHz Charging ——— 2 Radiated Emissions > 1GHz GFSK 2402, 2441, 2479 1 Mbps 1 200B bandwidth GFSK 2402, 2441, 2479 1 Mbps 1 NOTE: 1. The EUT was pretested with 3 orientations placed on the table for the radiated emission measurement — X, Y, and Z—plane. The Z—plane results were found as the worst case and were shown in this report. 2. The test contfigurations are listed as follows: Configuration 1 : Battery mode Configuration 2 : Charging mode 3. Three different types of strap materials (leather, metal and silicon) had been covered during the pretest and found thatsilicon strap material was the worst case and was selected for final test. Report No.: FR952804 Page : 10 of 29 Report Version: Rev. 01

3 Transmitter Test Results 3.1 Conducted Emissions 3.1.1 Limit of Conducted Emissions Conducted Emissions Limit Frequency Emission (MHz) Quasi-Peak Average 0.15-0.5 66 - 56 * 56 - 46 * 0.5-5 56 46 5-30 60 50 Note 1: * Decreases with the logarithm of the frequency. 3.1.2 Test Procedures 1. The device is placed on a test table, raised 80 cm above the reference ground plane. The vertical conducting plane is located 40 cm to the rear of the device. 2. The device is connected to line impedance stabilization network (LISN) and other accessories are connected to other LISN. Measured levels of AC power line conducted emission are across the 50 Ω LISN port. 3. AC conducted emission measurements is made over frequency range from 150 kHz to 30 MHz. 4. This measurement was performed with AC 120V / 60Hz. 3.1.3 Test Setup Report No.: FR952804 Page : 11 of 29 Report Version: Rev. 01

3.1.4 Test Result of Conducted Emissions Mode Charging Test Freq. (MHz) --- Power Phase Line Note 1: Level (dBuV) = Read Level (dBuV) + LISN Factor (dB) + Cable Loss (dB). 2: Over Limit (dB) = Level (dBuV) – Limit Line (dBuV). Report No.: FR952804 Page : 12 of 29 Report Version: Rev. 01

Mode Charging Test Freq. (MHz) --- Power Phase Neutral Note 1: Level (dBuV) = Read Level (dBuV) + LISN Factor (dB) + Cable Loss (dB). 2: Over Limit (dB) = Level (dBuV) – Limit Line (dBuV). Report No.: FR952804 Page : 13 of 29 Report Version: Rev. 01

C International Certification Corp. 3.2 Radiated Emission This section includes field strength of fundamental, field strength of harmonics and emissions radiated outside of the operating frequency bands. 3.2.1 Limit of field strength of fundamental and field strength of harmonics Field strength of fundamental Field strength of harmonics Fundamental Frequency {millivolts/meter) {microvolts/meter) 2400—2483.5 MHz 50 500 3.2.2 Limit of Unwanted Emissions Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in below table, whichever is the lesser attenuation. Radiated emission limits Frequency Range (MHz)| Field Strength (uV/m) |Field Strength (dBuV/m)| Measure Distance (m) 0.009~0.490 2400/F(kHz) 48.5 — 13.8 300 0.490~1.705 24000/F(kHz) 33.8 — 23 30 1.705~30.0 30 29 30 30~88 100 40 3 88~216 150 43.5 3 216~960 200 46 3 Above 960 500 54 3 Note 1: Qusai—Peak value is measured for frequency below 1GHz except for 9—90 kHz, 110—490 kHz frequency band. Peak and average value are measured for frequency above 1GHz. The limit on average radio frequency emission is as above table. The limit on peak radio frequency emissions is 20 dB above the maximum permitted average emission limit Note 2: Measurements may be performed at a distance other than what is specified provided. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor as below, Frequency at or above 30 MHz: 20 dB/decade Frequency below 30 MHz: 40 dB/decade. Report No.: FR952804 Page : 14 of 29 Report Version: Rev. 01

International Certification Corp. 3.2.3 Test Procedures 1. Measurement is made at a semi—anechoic chamber that incorporates a turntable allowing a EUT rotation of 360°. A continuously—rotating, remotely—controlled turntable is installed at the test site to support the EUT and facilitate determination of the direction of maximum radiation for each EUT emission frequency. The EUT is placed at test table. For emissions testing at or below 1 GHz, the table height is 80 cm above the reference ground plane. For emission measurements above 1 GHz, the table height is 1.5 m 2. Measurement is made with the antenna positioned in both the horizontal and vertical planes of polarization. The measurement antenna is varied in height (1m ~ 4m) above the reference ground plane to obtain the maximum signal strength. Distance between EUT and antenna is 3 m. 3. This investigation is performed with the EUT rotated 360°, the antenna height scanned between 1 m and 4 m, and the antenna rotated to repeat the measurements for both the horizontal and vertical antenna polarizations. Note: 1. Radiated emission below 1GHz 120kHz measurement bandwidth of test receiver and Quasi—peak detector is for radiated emission 2. Radiated emission above 1GHz / Peak value except fundamental RBW=1MHz, VBW=3MHz and Peak detector 3. Radiated emission above 1GHz / Average value for field strength of fundamental and harmonics The average value is: Average = Peak value + 20log(Duty cycle) Where the duty factor is calculated from following formula: 0.16957°2 ms 20l0g (Duty cycle) = 20l0g 100 ~49.390B Please see page 27 for plotted duty 4. Radiated emission above 1GHz / Average value for other emissions RBW=1MHz, VBW=10Hz and Peak detector 5. Radiated emission Peak value for fundamental RBW=3MHz, VBW=10MHz and Peak detector Report No.: FR952804 Page : 15 of 29 Report Version: Rev. 01

3.2.4 Test Setup Radiated Emissions below 1 GHz Radiated Emissions above 1 GHz Report No.: FR952804 Page : 16 of 29 Report Version: Rev. 01

3.2.5 Transmitter Radiated Unwanted Emissions (Below 1GHz) Modulation GFSK Test Freq. (MHz) 2402 Polarization Horizontal Test Configuration 1 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit. Report No.: FR952804 Page : 17 of 29 Report Version: Rev. 01

Modulation GFSK Test Freq. (MHz) 2402 Polarization Vertical Test Configuration 1 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit. Report No.: FR952804 Page : 18 of 29 Report Version: Rev. 01

Mode Charging Test Freq. (MHz) --- Polarization Horizontal Test Configuration 2 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit. Report No.: FR952804 Page : 19 of 29 Report Version: Rev. 01

Mode Charging Test Freq. (MHz) --- Polarization Vertical Test Configuration 2 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit. Report No.: FR952804 Page : 20 of 29 Report Version: Rev. 01

3.2.6 Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation GFSK Test Freq. (MHz) 2402 Polarization Horizontal Test Configuration 1 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Report No.: FR952804 Page : 21 of 29 Report Version: Rev. 01

Modulation GFSK Test Freq. (MHz) 2402 Polarization Vertical Test Configuration 1 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Report No.: FR952804 Page : 22 of 29 Report Version: Rev. 01

Modulation GFSK Test Freq. (MHz) 2441 Polarization Horizontal Test Configuration 1 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Report No.: FR952804 Page : 23 of 29 Report Version: Rev. 01

Modulation GFSK Test Freq. (MHz) 2441 Polarization Vertical Test Configuration 1 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Report No.: FR952804 Page : 24 of 29 Report Version: Rev. 01

Modulation GFSK Test Freq. (MHz) 2479 Polarization Horizontal Test Configuration 1 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Report No.: FR952804 Page : 25 of 29 Report Version: Rev. 01

Modulation GFSK Test Freq. (MHz) 2479 Polarization Vertical Test Configuration 1 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Report No.: FR952804 Page : 26 of 29 Report Version: Rev. 01

0.16957*2 ms 20log (Duty cycle) = 20log = -49.39dB 100 ms Report No.: FR952804 Page : 27 of 29 Report Version: Rev. 01

Infernational Certification Corp. 3.3 20dB and Occupied Bandwidth 3.3.1 Test Procedures Set resolution bandwidth (RBW) = 20 kHz, Video bandwidth = 100 kHz. por Detector = Peak, Trace mode = max hold Sweep = auto couple, Allow the trace to stabilize. m ® Measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower) that are attenuated by 200B relative to the maximum level measured in the fundamental emission. 5. Use the occupied measurement function of specturm analyzer to measure 99% occupied bandwidth. 3.3.2 Test Setup Spectrum Analyzer 3.3.3 20dB and Occupied Bandwidth Freq. (MHz) 200B Bandwidth (MHz) Occupied Bandwidth (MHz) 2402 0.530 0.881 2441 0.530 0.899 2479 0.526 0.894 Worst Plot of 20dB Bandwidth Worst Plot of Occupied Bandwidth Spectrum Spectrum ht covet 117 05 im Tw e rew s ht covet 117 05 im Tme e w m w 1000 swr 11 me e vaw 100 ie mode w 1000 swr 11 me e vaw 100 ie mode mvar mvar varn "ase vern "ase mo seocre m seocre Ocein oo sonsou7e0 dcetn usn.corsa0700 mitu sso7 sn so.se 100 w—f 210170080 100 w—f 2ss0705z0 so so cr z07 one crzm one Report No.: FR952804 Page : 28 of 29 Report Version: Rev. 01

C International Certification Corp. 4 Test laboratory information Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and one of the widest certification extents in the business. International Certification Corp (EMC and Wireless Communication Laboratory), it is our definitive objective is to institute long term, trust—based associations with our clients. The expectation we set up with our clients is based on outstanding service, practical expertise and devation to a certified value structure. Our passion is to grant our clients with best EMC / RF services by oriented knowledgeable and accommodating staff. Our Test sites are located at Linkou District and Kwei Shan District. Location map can be found on our website http //vww.icertifi.com.tw. Linkou Kwei Shan Kwei Shan Site II Tel: 886—2—2601—1640 Tel: 886—3—271—8666 Tel: 886—3—271—8640 No. 30—2, Ding Fwu Tsuen, Lin No. 3—1, Lane 6, Wen San 3rd St., No. 14—1, Lane 19, Wen San 3rd Kou District, New Taipei City, Kwei Shan District, Tao Yuan City St., Kwei Shan District, Tao Yuan Taiwan, R.O.C. 333, Taiwan, R.O.C. City 333, Taiwan, R.O.C. If you have any suggestion, please feel free to contact us as below information. Tel: 886—3—271—8666 Fax: 886—3—318—0155 Email: ICC_Service@icertifi.com.tw ==END= Report No.: FR952804 Page : 29 of 29 Report Version: Rev. 01


Document Created: 2019-08-12 15:47:26
Document Modified: 2019-08-12 15:47:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC