RF Exposure Info

FCC ID: IPH-B3697

RF Exposure Info

Download: PDF
FCCID_4394884

FCC RF Exposure Report FCC ID : IPH-B3697 Equipment : Watch and activity monitor Model No. : AB3697 Brand Name : GARMIN Applicant : Garmin International, Inc. Address : 1200 E. 151st Street Olathe, KS 66062 United States Standard : 47 CFR FCC Part 2.1093 Received Date : May 28, 2019 Tested Date : Jul. 22 ~ Jul. 24, 2019 We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Assistant Manager Gary Chang / Manager Report No.: FA952804 Page : 1 of 6 Report Version: Rev. 01

Table of Contents 1 EXPOSURE EVALUATION OF PORTABLE DEVICES ....................................................................... 4 1.1 SAR TEST EXCLUSION THRESHOLD FOR 100MHz to 6GHz and  50mm ................................... 4 1.2 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE ................................... 5 1.4 EVALUATION RESULTS ....................................................................................................................... 5 2 TEST LABORATORY INFORMATION ................................................................................................. 6 Report No.: FA952804 Page : 2 of 6 Report Version: Rev. 01

Release Record Report No. Version Description Issued Date FA952804 Rev. 01 Initial issue Aug. 05, 2019 Report No.: FA952804 Page : 3 of 6 Report Version: Rev. 01

1 EXPOSURE EVALUATION OF PORTABLE DEVICES Human exposure to RF emissions from portable devices (47 CFR §2.1093), as defined by the FCC, must be evaluated with respect to the FCC-adopted limits for SAR. Evaluation of mobile devices, as defined by the FCC, may also be performed with respect to SAR limits, but in such cases it is usually simpler and more cost-effective to evaluate compliance with respect to field strength or power density limits. For certain devices that are designed to be used in both mobile and portable configurations similar to those described in 47 CFR §2.1091(d)(4), such as certain desktop phones and wireless modem modules, compliance for mobile configurations is also satisfied when the same device is evaluated for SAR compliance in portable configurations. 1.1 SAR TEST EXCLUSION THRESHOLD FOR 100MHz to 6GHz and  50mm Frequency Separation distance 5 10 15 20 25 (MHz) (mm) 150 39 77 116 155 194 300 27 55 82 110 137 450 22 45 67 89 112 835 16 33 49 66 82 900 16 32 47 63 79 1500 12 24 37 49 61 SAR Test Exclusion 1900 11 22 33 44 54 Threshold (mW) 2450 10 19 29 38 48 3600 8 16 24 32 40 5200 7 13 20 26 33 5400 6 13 19 26 32 5800 6 12 19 25 31 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where •f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Report No.: FA952804 Page : 4 of 6 Report Version: Rev. 01

1.2 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE None 1.3 MEASUREMENT UNCERTAINTY ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2) Parameters Uncertainty Conducted power ±0.808 dB Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. 1.4 EVALUATION RESULTS Maximum Conducted Output Power Result Condition RF Output Power (dBm) Freq. Average Power Rated Power Rated Power Antenna Gain Modulation Mode (MHz) (dBm) (dBm) (mW) (dBi) LE-1Mbps 2402 -2.66 -2.5 0.56 -4.07 LE-1Mbps 2440 -2.56 -2.5 0.56 -4.07 LE-1Mbps 2480 -2.49 -2 0.63 -4.07 [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] =0. 63 / 5 * √2.48 = 0.198 < 3.0 SAR Test Exclusion Thresholds is < 10mW and 3.0 for separation distance 5mm. Therefore, SAR test is not required. Report No.: FA952804 Page : 5 of 6 Report Version: Rev. 01

C International Certification Corp. 2 Test laboratory information Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and one of the widest certification extents in the business. International Certification Corp (EMC and Wireless Communication Laboratory), it is our definitive objective is to institute long term, trust—based associations with our clients. The expectation we set up with our clients is based on outstanding service, practical expertise and devotion to a certified value structure. Our passion is to grant our clients with best EMC / RF services by oriented knowledgeable and accommodating staff. Our Test sites are located at Linkou District and Kwei Shan District. Location map can be found on our website http //vww.icertifi.com.tw. Linkou Kwei Shan Kwei Shan Site II Tel: 886—2—2601—1640 Tel: 886—3—271—8666 Tel: 886—3—271—8640 No. 30—2, Ding Fwu Tsuen, Lin No. 3—1, Lane 6, Wen San 3rd St., No. 14—1, Lane 19, Wen San 3rd Kou District, New Taipei City, Kwei Shan District, Tao Yuan City St., Kwei Shan District, Tao Yuan Taiwan, R.O.C. 333, Taiwan, R.O.C. City 333, Taiwan, R.O.C. If you have any suggestion, please feel free to contact us as below information. Tel: 886—3—271—8666 Fax: 886—3—318—0155 Email: ICC_Service@icertifi.com.tw ==END= Report No.: FA952804 Page : 6 of 6 Report Version: Rev. 01


Document Created: 2019-08-05 13:48:47
Document Modified: 2019-08-05 13:48:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC