STC_A03711 Short Term Conf UserMan 1

FCC ID: IPH-03711

Users Manual

Download: PDF
FCCID_4127185

GARMIN. Quick Start Manual

renveyt vesomp z "th ops1Buoes sotoj unuey 041 uim sopou ajes yeay ou seop, € 00 OO ® zomuusuen oy pue sopp 1nof usonteq uoowueo Buons e ajeaio o1 dens ay o yoeg oy uo @ soupred peiuco ay pue @ sopormaje ou tom 7 dn opsq4 aq prous (dens o4 pue anpou ay uo) sotor uie out. dens ay oo D anpou aomow ajes yeay ou deug J Aroce nok Buump on us es o yBnou Gnus aq pmoys 1 unuimss mot motog onl ‘uns nof uo Atmoup wouwow areyeay o ean pmous nok Joumon| eiex reey; oi up Buming vorewojuwevodur oyjo pue sBuwiem ppoid 10 109 onpoid ay ut apnd ogewojuy porpaiy pue Aaieswrvodu1 ouy seg suogonnsu) 1ouojy erey ueek

7 n The hook © and loop ® connection should be on yourrightside. 4: Wrap the strap around your chest, and comnect the srap hook tothe lop. NOTE: Make surethe caretag does not fold over Affeyou put on the heart rate montor, it is actve and sending data. Pairing the Heart Rate Monitor with Your ANT+® Device Before you pairthe heart rate montor wih your device, you must put on the heart rate montor. Paiing is the connecting ofANT+ wircless sensors,lke your heatrate monto, wi a Garmin ANT+ compatile device NOTE: Thpaiing instructions diferforeach (Garmin compatie device. See your owner‘s manval: + For most Gartin compatile devices,bing the device witin 3 m ofthe heart rate moritor and use the device menu t pai manvally. Quick Start Manval 3

• For some Garmin compatible devices, bring the device within 1 cm of the heart rate monitor to pair automatically. TIP: Stay 10 m away from other ANT+ sensors while pairing. After you pair the first time, your Garmin compatible device automatically recognizes the heart rate monitor each time it is activated. Pairing the Heart Rate Monitor with Your Wireless Device You can pair the heart rate monitor to your smartphone, tablet, smartwatch, or fitness equipment using wireless technology. 1 Put on the heart rate monitor. 2 Bring the device within 3 m (10 ft.) of the heart rate monitor. 3 Open the wireless settings on the device. The heart rate monitor should appear in the list of available devices. 4 Select the heart rate monitor. TIP: Stay 10 m (33 ft.) away from other wireless sensors while pairing. After you pair the first time, your device automatically recognizes the heart rate monitor each time it is activated. Tips for Erratic Heart Rate Data If the heart rate data is erratic or does not appear, you can try these tips. • Reapply water to the electrodes and contact patches (if applicable). • Tighten the strap on your chest. • Warm up for 5 to 10 minutes. 4 Quick Start Manual

• Follow the care instructions (page 5). • Wear a cotton shirt or thoroughly wet both sides of the strap. Synthetic fabrics that rub or flap against the heart rate monitor can create static electricity that interferes with heart rate signals. • Move away from sources that can interfere with your heart rate monitor. Sources of interference may include strong electromagnetic fields, some 2.4 GHz wireless sensors, high-voltage power lines, electric motors, ovens, microwave ovens, 2.4 GHz cordless phones, and wireless LAN access points. Caring for the Heart Rate Monitor NOTICE You must unsnap and remove the module before washing the strap. A build up of sweat and salt on the strap can decrease the ability of the heart rate monitor to report accurate data. • Go to www.garmin.com/HRMcare for detailed washing instructions. • Rinse the strap after every use. • Machine wash the strap after every seven uses. • Do not put the strap in a dryer. • When drying the strap, hang it up or lay it flat. Quick Start Manual 5

• To prolong the life of your heart rate monitor, unsnap the module when not in use. Linking to Fitness Equipment You can connect your heart rate monitor to compatible fitness equipment using ANT+ or wireless technology so you can view your heart rate on the equipment console. • Look for the ANT+LINK HERE logo on compatible fitness equipment. • Go to www.garmin.com/antplus for more linking instructions. • Look for the wireless logo on compatible fitness equipment. Replacing the Heart Rate Monitor Battery 1 Use a small Phillips screwdriver to remove the four screws on the back of the module. 2 Remove the cover and battery. 6 Quick Start Manual

3 Wait 30 seconds. 4 Insert the new battery with the positive side facing up. NOTE: Do not damage or lose the O-ring gasket. 5 Replace the back cover and the four screws. NOTE: Do not overtighten. After you replace the heart rate monitor battery, you may need to pair it with the device again. Heart Rate Monitor Specifications Battery type User-replaceable CR2032, 3V Battery life Up to 3.5 yr. at 1 hr./day Water resistance 1 ATM* NOTE: This product does not transmit heart rate data while swimming. Operating From -5 to 50 C (from temperature 23 to 122 F) range Quick Start Manual 7

Wireless 2.4 GHz @ 2 dBm nominal frequency/ protocol *The device withstands pressure equivalent to a depth of 10 m. For more information, go to www.garmin.com/waterrating. Limited Warranty The Garmin standard limited warranty applies to this accessory. For more information, go to www.garmin.com/support/warranty.html. 8 Quick Start Manual

support.garmin.com © 2019 Garmin Ltd. or its subsidiaries Garmin , the Garmin logo, and ANT+ are trademarks ® ® of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of Garmin. This product is ANT+ certified. Visit ® www.thisisant.com/directory for a list of compatible products and apps. The wireless word mark and logos are owned by the the wireless company and any use of such marks by Garmin is under license. M/N: A03711 Printed in Taiwan January 2019 190-00000-xx


Document Created: 2019-03-24 02:14:18
Document Modified: 2019-03-24 02:14:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC