RF Exemption

FCC ID: IPH-03672

RF Exposure Info

Download: PDF
FCCID_4340066

FCC IC RF Exposure Eclusion 4.3.1. Standalone SAR test exclusion considerations 100 MHz to 6 GHz at separation distance less than or equal to 50 mm SAR Test Exclusion Calculator Insert values in yellow highlighted boxes to determine SAR Exclusion Max Power 9 mW Min Separation 20 mm When the minimum test separation distance is < 5 mm, a distance of 5 mm is Frequency 2.4 GHz applied to determine SAR test exclusion. Answer 0.7 Must be less than or equal to 3.0 for SAR Exclusion Please also note the following: [FCC KDB quote] These test exclusion conditions are based on source-based time- averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions. The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface. [End quote] RSS-102 Table 1: SAR evaluation – Exemption limits for routine evaluation based on frequency and separation distance The device operating with 9 mW combined output power and maintaining a distance ≥ 20 mm complies with the requirements of RSS-102 Table 1 exclusion for SAR evaluation Rogers Labs, Inc. Garmin International, Inc. SN’s: 3989371048 / 3989371063 4405 West 259th Terrace Model: A03672 FCC ID: IPH-03672 Louisburg, KS 66053 Test: 190218 IC: 1792A-03672 Phone/Fax: (913) 837-3214 Test to: 47 CFR 15C, RSS-210 RSS-247 Date: May 21, 2019 Revision 1 File: A03672 RF Exemption Page 1 of 1


Document Created: 2019-05-21 15:41:36
Document Modified: 2019-05-21 15:41:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC