RF Exclusion

FCC ID: IPH-03571

RF Exposure Info

Download: PDF
FCCID_4237968

FCC IC RF Exposure Eclusion 4.3.1. Standalone SAR test exclusion considerations 100 MHz to 6 GHz at separation distance less than or equal to 50 mm SAR Test Exclusion Calculator Insert values in yellow highlighted boxes to determine SAR Exclusion Max Power 8 mW Min Separation 20 mm When the minimum test separation distance is < 5 mm, a distance of 5 mm is Frequency 2.4 GHz applied to determine SAR test exclusion. Answer 0.6 Must be less than or equal to 3.0 for SAR Exclusion Please also note the following: [FCC KDB quote] These test exclusion conditions are based on source-based time- averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions. The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface. [End quote] RSS-102 Table 1: SAR evaluation – Exemption limits for routine evaluation based on frequency and separation distance The device operating with 8 mW output power and maintaining a distance ≥ 20 mm complies with the requirements of RSS-102 Table 1 exclusion for SAR evaluation Rogers Labs, Inc. Garmin International, Inc. SN’s: 24361 / 24365 4405 W. 259th Terrace Model: A03571 FCC ID: IPH-03571 Louisburg, KS 66053 Test #: 181022 IC: 1792A-03571 Phone/Fax: (913) 837-3214 Test to: CFR47 15.249 RSS-247 Date: March 14, 2019 Revision 1 File: A03571 RFExp Page 1 of 1


Document Created: 2019-03-14 10:24:23
Document Modified: 2019-03-14 10:24:23
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC