RF Exemption

FCC ID: IPH-0328533

RF Exposure Info

Download: PDF
FCCID_4213600

FCC IC SAR Eclusion 4.3.1. Standalone SAR test exclusion considerations 100 MHz to 6 GHz at separation distance less than or equal to 50 mm SAR Test Exclusion Calculator Insert values in yellow highlighted boxes to determine SAR Exclusion Max Power 4 mW Min Separation 5 mm When the minimum test separation distance is < 5 mm, a distance of 5 mm is Frequency 2.4 GHz applied to determine SAR test exclusion. Answer 1.2 Must be less than or equal to 3.0 for SAR Exclusion KDB 628591 D01 TCB Exclusion List v14 TCBs are excluded from granting if: General Population: The Answer is equal to or greater than 24 (8x threshold) Controlled Use: The Answer is equal to or greater than 60 (20x threshold) and, when published RF exposure KDB procedures are not established for SAR Please also note the following: [FCC KDB quote] These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions. The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface. [End quote] RSS-102 Table 1: SAR evaluation – Exemption limits for routine evaluation based on frequency and separation distance The device operating with 4mW output power and maintaining a ≤5 mm distance complies with the requirements Rogers Labs, Inc. Garmin International, Inc. SN: 5GJ000404 4405 West 259th Terrace Model: GMN-01823 FCC ID: IPH-0328533 Louisburg, KS 66053 Test: 181113 IC: 1312A-0328533 Phone/Fax: (913) 837-3214 Test to: CFR47 15.249, RSS-210 Date: February 28, 2019 Revision 1 File: GMN01823 RF Exemption Page 1 of 1


Document Created: 2019-02-28 12:52:41
Document Modified: 2019-02-28 12:52:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC