RF Exposure Exemption

FCC ID: IPH-03285

RF Exposure Info

Download: PDF
FCCID_4213496

SAR Test Exclusion Calculator Insert values in yellow highlighted boxes to determine SAR Exclusion Max Power 4 mW Min Separation 5 mm When the minimum test separation distance is < 5 mm, a distance of 5 mm is Frequency 2.4 GHz applied to determine SAR test exclusion. Answer 1.2 Must be less than or equal to 3.0 for SAR Exclusion Please also note the following: [FCC KDB quote] These test exclusion conditions are based on source- based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions. The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface. [End quote] RSS-102 Table 1: SAR evaluation – Exemption limits for routine evaluation based on frequency and separation distance The device operating with 4mW output power and maintaining a ≤5 mm distance complies with the requirements Rogers Labs, Inc. Garmin International, Inc. SN’s: 5GH000404 / 5GH000403 4405 W. 259th Terrace Model: GMN-01822 FCC ID: IPH-03285 Louisburg, KS 66053 Test: 181112 IC: 1312A-03285 Phone/Fax: (913) 837-3214 Test to: CFR47 15, RSS-210 Date: March 12, 2019 Revision 1 File: GMN01822 RF Exemption Page 1 of 1


Document Created: 2019-03-12 14:44:18
Document Modified: 2019-03-12 14:44:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC