RF Exposure Report

FCC ID: INGRU-G3TH

RF Exposure Info

Download: PDF
FCCID_4032731

FCC ID: INGRU-G3TH RF Exposure Evaluation of E.U.T. : UHF PLL hand-held transmitter FCC ID. : INGRU-G3TH MODEL : RU-G3TH for APPLICANT : ADDRESS : Prepared by ELECTRONICS TESTING CENTER, TAIWAN NO. 34. LIN 5. DINGFU, LINKOU DIST., NEW TAIPEI CITY, TAIWAN, 24442, R.O.C. Tel:(02)26023052 Fax:(02)26010910 http://www.etc.org.tw ; e-mail: emc@etc.org.tw Report Number : 17-07-RBF-020-MPE

FCC ID: INGRU-G3TH TEST REPORT CERTIFICATION Applicant : JTS Professional Co., Ltd. NO. 148, 9TH INDUSTRY RD., TA-LI INDUSTRIAL PARK, TAI-LI CITY, TAIWAN, R.O.C. Manufacturer : JTS Professional Co., Ltd. NO. 148, 9TH INDUSTRY RD., TA-LI INDUSTRIAL PARK, TAI-LI CITY, TAIWAN, R.O.C. Description of EUT a) Type of EUT : UHF PLL hand-held transmitter b) Trade Name : JYS c) Model No. : RU-G3TH d) Serial Model : --- e) Power Supply : DC 3V Battery Regulation Applied : FCC KDB447498 D01. The equipment fulfills the requirements on power density for general population/uncontrolled exposure and therefore fulfills the requirements of section 1.1310 of FCC 47 CFR Part 1. Note: 1. The result of the testing report relate only to the item tested. 2. The testing report shall not be reproduced expect in full, without the written approval of ETC

FCC ID: INGRU-G3TH Date of Issue : Sep,25, 2018 Test Engineer : (Brian Huang, Engineer ) Approve & Authorized Signer : Vincent Chang, Supervisor EMC Dept. II of ELECTRONICS TESTING CENTER, TAIWAN

FCC ID: INGRU-G3TH Product Information: Type of EUT: UHF PLL hand-held transmitter FCC ID: INGRU-G3TH Model: RU-G3TH According to KDB 447498 section 4.3.1, the 1-g SAR test exclusion thresholds at test separation distance ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance,mm)] ·[√f(GHz)] ≤ 3.0 The max. average power of channel, including tune-up tolerance(mW) is 10.0mW @ 607.875MHz (With Tune-up tolerance), The min. test separation distance (mm) is 5 mm, So, [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] ·[√f(GHz)] = 1.56 < 3.0 (With Tune-up tolerance). Therefore, standalone SAR measurements are not required for both head and body. .


Document Created: 2018-09-27 16:22:09
Document Modified: 2018-09-27 16:22:09
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC