User Manual

FCC ID: INGIN-264TB

Users Manual

Download: PDF
FCCID_1830972

Music Life INFINITY IN264TB - SET + IN264R AF AF RF RF SET SET ▲ ▲ REMOSET ▲ ▲ REMOSET IN264 UHF PLL Dual Channel Diversity Wireless System * The system is of the innovative design to allow changing the transmitter’s frequency by long-distance . * IN264R with band width of 36 MHz. * Preset 6 groups, maximum 23 channels in one group. 59508-021-02

Music Life INFINITY 1. Important Caution 1. Important Caution 01 Always make all connections before plugging the unit into an AC power outlet. 2. Features 01 Do not leave the devices in a place with high temperature or high humidity. Do not handle the power cord with wet hands ! 3. Parts Identification 02 Keep the devices away from fire and heat sources. 3-1 IN264R 02 Pair the ID codes of the transmitter and the receiver to have proper function. 3-2 IN264TH 03 3-3 IN264TB 04 3-4 Accessories 04 2. Features 4. Connection 05 JTS IN264 wireless microphone system is designed with the world first RF 4-1 Connect to the subsequent unit 05 remote setting function (REMOSET). A user can set the receiver with desired frequency and press the “REMOSET” Key; then the transmitter will automatically be 4-2 Connect the power supply unit 05 set. The operation distance can reach 10 meters. This brings great convenience to 5. Operation 06 sound engineers during live performance. IN264 is of 36MHz bandwidth to render 23 transmitters work simultaneously. 5-1 Set up the system 06 It provides great convenience to large venue. 5-2 Set up ID code 06 A new capsule has been developed for IN264TH . The capsule, SAM-8W, is 07 designed for large venue with hundreds of thousands watt power. The SAM-8W 5-3 Synchronize the channel delivers vivid details of vocal and instruments. 5-4 Check system status 08 The IN264 is of stylish industry design. Yet JTS bombproof quality remains as 5-5 Manual select channel 09 always. 5-6 REMOSET button lock 10 IN264 5-7 Adjust the sensitivity of the microphone 11 6. Specification 13 01

Music Life INFINITY 3. Parts Identification LCD Panel of the Receiver a AF Level: display the strength of audio signal 3-1 IN264R b RF Level: display the strength of radio signal Front panel c Antenna Status: the receiver will automatically select an antenna with stronger signal level 1 Power Switch d Low battery indicator: display the low battery status of its transmitter 2 Channel Selector: including “ up”, “ down” and “Set” button e Group & Channel: there are 6 groups, maximum 23 channels in one group. 3 LCD Panel 4 REMOSET Key: press it to send a desired channel data to a transmitter c d 6 a 4 2 3 3 2 4 1 AF b RF e IN264R AF AF RF RF SET SET ▲ ▲ REMOSET ▲ ▲ REMOSET 3-2 IN264TH 12 LCD Display 13 Battery Tray 14 Set button: set the configuration of 9 9 5 7 11 10 8 10 7 6 5 handheld transmitter 15 Up button: select the settings of transmitter 12 17 Rear panel 16 Down button: select the settings of transmitter 16 15 5 BNC antenna connector 17 Power and Mute Switch 14 6 Power Supply Jack (12-18V/600mA): for connecting the power supply unit 7 Squelch adjuster: to adjust radio signal level of both channels 8 Mixed AF Output (6.3mm jack, unbalanced): for connection to a balanced input, 13 e.g. of a mixer or amplifier LCD Panel of the Handheld Transmitter 9 Balanced XLR Output: for connection to the balanced input, e.g. of a mixer or an f Battery status: display battery status IN264 amplifier g Group & Channel: there are 6 groups, maximum 23 10 Output Level Attenuation(-10dB,-20dB): to attenuate the balanced XLR output channels in one group. level by 10dB,20dB g 11 LIFT / GND f 02 03

Music Life INFINITY 3-3 IN264TB 4. Connection 18 LCD Display 4-1 Connect to the subsequent unit (e.g. mixer, or amplifier) 19 Battery Tray Connect one end of a proper AF cable to the AF Output 9 or Balanced XLR 20 Set button: set the configuration of bodypack transmitter Output socket 10 , then plug another end to the “MIC IN” input socket of a 21 Up button: select the settings of transmitter mixer or a amplifier (Step 1 of Figure 1) 22 Down button: select the settings of transmitter 23 4 Pin mini XLR mic. input 4-2 Connect the power supply unit 24 Power Switch Plug in one end of AC/DC adaptor cable 27 to Power Supply Jack 7 in the rear panel of receiver, and plug another end into an AC outlet 25 Gain control: control sensitivity of the transmitter 26 Pad: -20dB, -6dB, 0dB (Step 2 of Figure 1) LCD Panel of the Body-Pack Transmitter h Battery status: display battery status i Group & Channel: there are 6 groups, maximum 23 channels in one group. 24 MIXER 26 1 AUDIO OUTPUT 18 25 23 -20 -6 0 20 21 22 DC INPUT 19 h 28 - 29 IN264 2 i Figure 1 3-4 Accessories 27 AC/DC adaptor 28 AF output cable 27 (with Φ6.3 plug at both ends) 29 Screwdriver (IN264TB) 30 CM-501 (IN264TB) 30 04 05

Music Life INFINITY 5. Operation Handheld and BodyPack transmitter 5-1 Set up the system ID code ON/OFF setting A) Turn on the power of the receiver A) Press "Set" button 14 20 for 3 seconds, LCD Panel will Switch the “Power Switch” 2 to “ON”. The “LCD Panel” 4 and “REMOSET” start flashing. Key 5 will light up. B) Press "Set" a couple of times until "ID Code ON/OFF" setting window shows. B) Turn on the power of the transmitter C) Press " Up" or " Down" button to select between " ID ON " and " ID OFF ". Press the “Power Switch” 17 24 . The “LCD Display” 12 18 will light up. D) After setting, press "Set" again to save the settings. C) Mute Function ( for IN264TH ) Caution After the transmitter's power is on, short pressing the "Power Switch " 17 When ID code is off (idOFF), the transmitter will accept any will mute the microphone. Press the "Power Switch" again will re-activate synchronization from any IN264R. the microphone. ID code selecting Notice: You have to hold the "Power Switch" for 3 seconds in order to turn A) Press "Set" button 14 20 for 3 seconds, LCD Panel will start flashing. off the transmitter. B) Press "Set" a couple of times until "ID Code" setting window shows. C) Press " Up" or " Down" button to select a D) Install the antennas 1 6 in a vertical position distinct ID code from " id 0" to "id 99 ". (Figure 3) D) After setting, press "Set" again to save the setting. 5-2 Set up ID code In order to match one receiver channel to one transmitter, IN264 is designed with“ ID code”. If and only if both ID codes of a receiver channel and a transmitter match each other, the “REMOSET” function works. When - setting the ID code, system will automatically avoid the ID code used by 3” IN264TB 3” the other channel. There are 100 ID codes available. - SET + Receiver Figure 3 A) Press "Set" button 3 for 3 seconds, LCD Panel will start flashing. B) Press "Set" to enter "ID Code" IN264 setting window. (Figure 2) C) Press " Up" or Down" button to select a distinct ID code from "id 0" to "id 99". ▲ SET ▲ D) After setting, press "Set" again to save the setting. Figure 2 06 07

Music Life INFINITY 5-3 Synchronize the channel 5-5 Manual select channel: A) Press "Set" button on the receiver for 3 Seconds, the group (G) in the Receiver "Group & Channel" e area will flash. (Figure 4) A) Press "Set" button for 3 seconds, the group (G) in the "Group & Channel" B) Press " Up" or " Down" button to select a desired group area will flash. (Figure 8) C) Press "Set" again and the Channel (CH) in the "Group & Channel" area B) Press " Up" or " Down" button will flash. to select a desired group. D) Press " Up" or " Down" button to select a desired channel. C) Press "Set" again and the Channel AF E) After setting, press “Set” again to save the settings. (CH) in the "Group & Channel" RF ▲ SET ▲ F) Press "REMOSET" 4 to synchronize the channel of a transmitter. area will flash. (Figure 5) D) Press " Up" or " Down" button Figure 8 G) If the channel of the transmitter fails to change, the "REMOSET" key will to select a desired channel. keep flashing. E) After setting, press “Set” again to save the setting. Notice 1: The transmitter has to be set to "synchronization on (SYnOn)" in order to allow the receiver to synchronize.(Handheld and Scan Function body Pack Setting List p.12 ) A) Press "Set" button for 3 seconds, the group (G) will flash. Notice 2 : When setting the channel, system will automatically avoid B) Press "Set" to enter “Sn OF” or “Sn On”. the channel used by the other channel. C) Press " Up" to select “Sn On” , press " Down" to select “Sc OF” . D) If select “Sc On” , when select channel, the receiver will jump over a channel in use automatically. AF AF RF RF SET SET ▲ ▲ ▲ ▲ REMOSET Handheld and BodyPack transmitter A) Press "Set" button for 3 seconds, the group (G) will flash. (Figure 9) Figure 4 Figure 5 B) Press " Up" or " Down" button to select a desired group. 5-4 Check system status C) Press "Set" again and the Channel (CH) will flash. A) Antenna Status: the receiver will automatically select an antenna with D) Press " Up" or " Down" button to select a desired channel. stronger signal reception and highlight that antenna c (Figure 6) IN264 E) After setting, press “Set” again to save the setting. B) Battery indicator: the receiver’s battery indicator will show the same gauge as the transmitters. If the transmitter is under low battery status, the receiver LCD backlight will be on amber. 3” IN264TB 3” AF AF - SET + RF RF Figure 9 Figure 6 Figure 7 08 09

Music Life INFINITY 5-6 Lock ON Function 5-7 Adjust the sensitivity of the microphone Receiver Handheld transmitter A) Press "Set" button for 3 seconds to enter setting window A) Press "Set" button for 3 seconds to enter B) Press "Set" again until the Lock setting window shows. (Figure 10) setting window. (Figure 12) Notice: Original setting is lock off (Lo OF). B) Short press "Set" until the sensitivity C) Press " Up" or " Down" button to setting window shows. select the mode between "Lock On" C) Press " Up" or " Down" button to 3” and "Lock off". select the sensitivity among 0db, D) After setting, press "Set" again to AF -3db, -6db, -9db, -12db, -15db, -18db RF SET ▲ ▲ save the setting. and -21db. Figure 12 D) After setting, press "Set" again to Figure 10 To release the “Lock ON” save the setting. A) Press “Set” for 2 seconds. B) Press “down” to select “Lock OFF”. BodyPack transmitter C) Press “Set” to store. A) Use the screwdriver 29 included to adjust the sensitivity from gain control 25 . (clockwise is "increase") Handheld and BodyPack transmitter B) If further adjustment is needed please adjust the pad. 26 A) Press "Set" button for 3 seconds to enter setting window. (Figure 11) B) Press "Set" again until the Lock setting window shows. 5-8 Adjust the transmitting power Notice: Original setting is lock off (Lo OF). Handheld/Body Pack Transmitter C) Press " Up" or " Down" button to select the mode between "Lock On" A) Push the "Set" button several times until the "rF Lo " or "rF Hi" flashes. and "Lock off". B) Then push "Up" to choose "Hi" for high transmitting power and push D) After setting, press "Set" again to save the setting. "Down" to choose "Lo" for low transmitting power. C) Push the "Set" again to save the setting. To release the “Lock ON” IN264 A) Press “Set” for 2 seconds. B) Press “down” to select “Lock OFF”. C) Press “Set” to store. 3” IN264TB 3” - SET + Figure 11 10 11

Music Life INFINITY 6. Specification Handheld and Body Pack Setting List 6-1 IN264R Frequency Preparation.... PLL Synthesized Control Remoset............................ Radio Frequency : 2.4GHz Effective distance: 10m Carrier Frequency Range 502~960 MHz S/N Ratio............................ >105dB T.H.D.................................. <0.6%@1KHz Sensitivity Display............................... LCD 0 dB is the highest sensitivity Display Contents.............. Channel, Antenna A/B, Mute Display, RF/AF Level Meter, Settings Low battery, ID Number Controls............................. Power On/Off, Frequency Up/Down, Lock-on, ID Pairing, Remoset Audio Output Level.......... -12dB AF Output Impedance...... ȍ Squelch.............................. Pilot Tone & Noise Mute Operation Voltage............. 12-18 VDC, 600 mA Output Connector............. 2 XLR Balanced Socket / 1 Ø6.3mm unbalanced phone jack Synchronization “On” means “REMOSET” function always opens; Dimension(m/m)............... 420mm(W) * 44mm(H) * 211mm(D) ON/OFF “OFF” means “REMOSET” function is turned off When ID code is OFF (id OFF), the transmitter will 6-2 IN264TH ID code ON/OFF accept any synchronization from any IN264R. Frequency Preparation......... PLL Synthesized Control Carrier Frequency Range..... 502~960 MHz RF Outputs............................ 10mW Stability.................................. ±10KHz Frequency Deviation............. ±48KHz LCD Display........................... Channel, Battery Fuel Gauge, ID Number ID code select ~ There are 100 ID codes. Controls................................. Power On/Off, AF Level, Frequency Up/Down, Lock-on Mode,ID Pairing Spurious Emissions............. <-50 dBC Audio Frequency Response 50~16,000 Hz button unlock Lock ON Battery.................................... UM3, AA 1.5V*2 button lock 6-3 IN264TB IN264 Frequency Preparation........ PLL Synthesized Control Carrier Frequency Range.... 502~960 MHz RF Outputs............................ 10mW Stability................................. ±10KHz Frequency Deviation............ ±48KHz LCD Display.......................... Channel, Battery Fuel Gauge, ID Number Controls................................ Power On/Off, AF Level, Frequency Up/Down, PAD, Gain Control Lock-on Mode, ID Pairing Output connector................. 4P mini XLR Spurious Emissions............. <-50 dBC Audio Frequency Response 40~18,000 Hz Battery................................... UM3, AA 1.5V*2 12 13


Document Created: 2010-12-20 15:43:46
Document Modified: 2010-12-20 15:43:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC