test Report

FCC ID: IKQMCQ

Test Report

Download: PDF
FCCID_4491074

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 1 of 24 TEST REPORT Application No.: SZEM1903011643CR Applicant: Scosche Industries Inc. Address of Applicant: 1550 Pacific Ave, Oxnard, CA93033, USA Manufacturer: Scosche Industries Inc. Address of Manufacturer: 1550 Pacific Ave, Oxnard, CA93033, USA Factory: Scosche Industries Inc. Address of Factory: 1550 Pacific Ave, Oxnard, CA93033, USA Equipment Under Test (EUT): EUT Name: Wireless car charger Model No.: MCQ, MCQVP-XTET, MCQD-XTET, MCQWDDP-XTET, MCQWD-XTET, MCQXX-XX (XX can be A-Z or 0-9, the first "XX" stands for mount base, the second "XX" stands for customer code) ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: SCOSCHE FCC ID: IKQMCQ Standard(s) : 47 CFR Part 15, Subpart C Date of Receipt: 2019-08-13 Date of Test: 2019-08-13 to 2019-08-16 Date of Issue: 2019-08-20 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Keny Xu EMC Laboratory Manager

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 2 of 24 Revision Record Version Chapter Date Modifier Remark 01 2019-08-20 Original Authorized for issue by: Harry Wu /Project Engineer Eric Fu /Reviewer

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 3 of 24 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result . 47 CFR Part 15. 47 CFR Part 15, Subpart Antenna Requirement Subpart C N/A C15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result . 47 CFR Part 15, ANSI C63.10 (2013) 47 CFR Part 15, Subpart 200B Bandwidth Subpart C Section 6.9.2 C15.215 Pass . 47 CFR Part 15, ANSI €63.10 (2013) 47 CFR Part 15, Subpart Restricted Bands Subpart C Section 6.10.5 C 15.205 Pass Radiated Emissions 47 CFR Part 15, ANSI C63.10 (2013) 47 CFR Part 15, Subpart Pass (IkHz—30MHz) Subpart C Section 6.4 C 15.205 & 15.209 Radiated Emissions 47 CFR Part 15, ANSI C63.10 (2013) 47 CFR Part 15, Subpart Pass (3OMHz—1GHz) Subpart C Section 6.5 C 15.205 & 15.209 Declaration of EUT Family Grouping: Model No.: MCQ, MCQVP—XTET, MCQD—XTET, MCQWDDP—XTET, MCQWD—XTET, MCQXX—XX (XX can be A—Z or 0—9, the first "XX" stands for mount base, the second "XX" stands for customer code) Only the model MCQ was tested, since the electrical circuit design, layout, components used, internal wiring and functions were identical for all the above models, with only difference on Model Name, mount base and packaging. Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overieat, available on request or accessible at hpy/wwwsgs.comen/Terms—and—condlons.aspx and. for electronic format documents, subject to Terms and Condilions for Electronic Documents at hiip:/hwwnw.sgs.comfen/Terms—and—Gonditions/Terms—0—Document aspx. Attention is drawn to the limitation of lability, indamnification and jurlsdiction issues defined therein. Any holder of this document is advised that information contained hereon raflects the Company‘s findings at the time of ts intervention only and within the limits of Clients instructions, if any. The Company‘s sole responsibilit is to its Client and this document does not exonerate parties to a fransaction from exereising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or " epiemremt appearance of this document is unlewil and offenders may bep rosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample() tested and such sample(s) are retained for 30 days on! “7 Inpezton & TesingSevices @f Aftention: To check the authenticity 0 testing !Inspection report & certificate, please contact us at |elephg'ne (86—755)e307 t443, $A or email: CN. Doecheck@sas.com lrds Technical wbfco im No.t Wortshop, M—10, idde Secton, Stince 8 TechnologyPar: Shenzhen, Clina 518057 t (€6—758)20012058 1 (86—755) 26710504 wincsgegroup.comn ShonwhenBnt Ig BB eerTshonioy #B B AARdERN—10K—S1B #B#R: s1eos7 t (B6—758)26012053 1 (@6—755) 26710504 sps china@sys.com Member of the SGS Group (SGS SA)

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 4 of 24 3 Contents Page 1 COVER PAGE ...... ... .cc ce en eenenerererreverererereererereererereeererereeereeeeereereeeeereeeneereeeneeneeveeneeneene en nenne en nennnvvvenenennnn 1 2 TEST SUMMARY ....... ... . e0 0000000006 06090rererereererereerererereererere e reeere e reeeeeaereereeneeeneene en eeeenenne en nennnevvenennnnvvenene 3 3 CONTENTS ..... . .. en e en 000000 e 060909 ereeevererereererereeererere e reeee e e reeee e e ree en eaeeneeereeneeneeveeneeneene en nenne en nennnnevenenennnn 4 4 GENERAL INFORMATION ... ... ... .. .. cce ne0eeee609erererrerererereererereeererereeereeeee e rereeeeeneeneene en nenne en nennnnvvenennnne 5 4.1 DeTAILS OF E.U.T.. .5 4.2 Description or SupPort UniT 5 4.3 MEASUREMENT UNCERTAINTY . 5 4.4 TEst LOCATION... 6 4.5 Test FACiLTY.. 6 4.6 DeviATION FROM STANDARDS.. 6 4.7 ABNORMALITIES FROM STANDARD CONDITIONS .. ...6 5 EQUIPMENT LIST ...... .ce eeeremreermmereeermereeermereeermereeermereeermerereenereeenmeeneereeenmeereennmeereeennnenre en 7 6 RADIO SPECTRUM TECHNICAL REQUIREMENT .......... .ce memereeermmereeermeneereeermerereeenmereenmeren en 9 6.1 ANTENNA REQUIREMENT .. .. .200 e e e e en en e en en en eneeeeee en eeee en en eeee en enevee en enevee n en enevee en neneenenenevecnenenene 9 6.1.1 Test Requirement: 6.1.2 Conclusion ... 7 RADIO SPECTRUM MATTER TEST RESULTS. 7.1 200B BANDWIDTH.. 7.1.1 EU.T. Operation 7.1.2 Test SQ@tup Di@QIAM ... 7.1.3 Measurement Procedure and Data... 7.2 ResTRICTED BANDS .. 7.2.1 E.U.T. Operation 7.2.2 Test SQ@tup Di@QIAM ...z 7.2.3 Measurement Procedure and Data... 7.3 RADIATED EMISSIONS (9KHz—30MHz). 7.3.1 EU.T. OD@AtiON.......ccsccne. 7.3.2 Test SQ@tup Di@QIAM ...z 7.3.3 Measurement Procedure and Data... 7.4 RADIATED EMISSIONS (3OMHz—1GHz) ... 7.4.1 EU.T. OD@AtiON........cccccmmeee 7.4.2 Test SQ@tup Di@QIAM ... 7.4.3 Measurement Procedure and Data 8 PHOTOGRAPHS...........cecmeemmmneemeereemereeemereeemereeenmeereeenmeerereeneneenneneeneerennnneerennnnennennnnenne n 24 8.1 lc S e 8.2 EUT ConstructionaL DetaiLs (EUT PHotos).. Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at hitp/wanw.sas..comen/Terms—and—Conditions.aspx and, for electronic format documents, Subject to Terms and Gonditions for blectronte Documents at hilim sgs. comfentTerms—ang:Condiions/terms.6.booument aspx. Attention is drawn to the limitation of lability, indamnification and jurlsdiction issues defined therein. Any holder of this document is advised that information contained hereon raflects the Company‘s findings at the time of ts intervention only and within the limits of Clients instructions, if any. The Company‘s sole responsiblity is to its Client and this document does not exonerate parties to a fransaction from exereising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or 10 ibH appearance of this documentis unlawful and offendars may be prosecuted to the fullest extent of the law. Unlass othenwise stated the %unspm results shown in this test report refer only to the sample() tested and such sample(s) are retained for 30 days only. Aftention: To check the authenticity of testing /inspection report & certificate, please contact us at télophone: (86—755) 8307 1443, or email: CN. Doecheck@sas.com 508 03 Nffagar 6 No.t Wortshap, N—10,l Secton, Science 8 Technology Par: Shenzhen, Cina 518057 t (86—755) 26012053 f (86—758) 26710504 wimsgsgroup.com.en ShonwhenBont sborloy hB «BRABRdEN—108—S1 B #B#R: s1eos7 t (B6—758)26012053 1 (@6—755) 26710504 sps china@sys.com t Member of the SGS Group (SGS SA)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 5 of 24 4 General Information 4.1 Details of E.U.T. Power supply: Input: DC 5V, 2A or DC 9V, 1.67A Output: 5W, 7.5W, 10W Car Charge, Model: CQA8 Input: DC 12V Output: DC 3.6-6.5V, 3.0A DC 6.5-9V, 2.0A DC 9-12V, 1.5A Cable: Type C Cable: 150cm, Unshielded Antenna Type: Loop Antenna Antenna Gain: 0dBi Modulation Type: Load Modulation Operation Frequency: 123.462kHz to 205.192kHz Remark: Tests were conducted in all three load modes and the worst case 10W(DC 9V, 1.67A) is reported only. 4.2 Description of Support Units Description Manufacturer Model No. Serial No. iPhone 8 Apple A1863 F4GVQ656JC6D Mobile Phone SAMSUNG SM-G9500 R28J9140LPB 4.3 Measurement Uncertainty No. Item Measurement Uncertainty 1 Radio Frequency ± 7.25 x 10-8 2 Occupied Bandwidth ± 3% 3 Radiated Spurious emission test ± 4.5dB (Below 1GHz) 4 Temperature test ± 1°C 5 Humidity test ± 3% 6 Supply voltages ± 1.5% 7 Time ± 3%

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 6 of 24 4.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 4.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. 4.6 Deviation from Standards None 4.7 Abnormalities from Standard Conditions None

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 7 of 24 5 Equipment List 20dB Bandwidth Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room SAEMC MSR733 SEM001-09 2019-06-13 2024-06-12 DC Power Supply ZhaoXin RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSP SEM004-06 2018-09-27 2019-09-26 JS1120-2 Measurement Software JS Tonscend N/A N/A N/A BT/WIFI V2. Coaxial Cable SGS N/A SEM031-02 2019-07-11 2020-07-10 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz NRVS SEM014-02 2018-09-25 2019-09-24 Electric and Magnetic NBM- Narda EMC2143 2018-02-07 2020-02-06 Field Analyzer 550/EHP-50F Electric Field Probe WANDEL & EMR-20 EMC0907 2019-05-21 2020-05-20 (100KHz-3GHz) GOLTERMANN EMF Tester Narda ELT-400 SZE039-4 2019-07-08 2020-07-07 Restricted Bands Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room SAEMC MSR733 SEM001-09 2019-06-13 2024-06-12 DC Power Supply ZhaoXin RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSP SEM004-06 2018-09-27 2019-09-26 JS1120-2 Measurement Software JS Tonscend N/A N/A N/A BT/WIFI V2. Coaxial Cable SGS N/A SEM031-02 2019-07-11 2020-07-10 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz NRVS SEM014-02 2018-09-25 2019-09-24 Electric and Magnetic NBM- Narda EMC2143 2018-02-07 2020-02-06 Field Analyzer 550/EHP-50F Electric Field Probe WANDEL & EMR-20 EMC0907 2019-05-21 2020-05-20 (100KHz-3GHz) GOLTERMANN EMF Tester Narda ELT-400 SZE039-4 2019-07-08 2020-07-07 Radiated Emissions (9kHz-30MHz) Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date 10m Semi-Anechoic SAEMC FSAC1018 SEM001-03 2018-03-31 2021-03-30 Chamber

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 8 of 24 e3 V8.2014-6- Measurement Software AUDIX N/A N/A N/A 27 Coaxial Cable SGS N/A SEM029-01 2019-07-11 2020-07-10 EMI Test Receiver Rohde & Schwarz ESR SEM004-03 2019-04-01 2020-03-31 (9kHz-7GHz) BiConiLog Antenna ETS-LINDGREN 3142C SEM003-02 2019-05-24 2022-05-23 (26-3000MHz) Sonoma Instrument Pre-amplifier 310N SEM005-04 2019-04-12 2020-04-11 Co Active Loop Antenna ETS-Lindgren 6502 SEM003-08 2017-08-22 2020-08-21 Radiated Emissions (30MHz-1GHz) Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date 10m Semi-Anechoic SAEMC FSAC1018 SEM001-03 2018-03-31 2021-03-30 Chamber e3 V8.2014-6- Measurement Software AUDIX N/A N/A N/A 27 Coaxial Cable SGS N/A SEM029-01 2019-07-11 2020-07-10 EMI Test Receiver Rohde & Schwarz ESR SEM004-03 2019-04-01 2020-03-31 (9kHz-7GHz) BiConiLog Antenna ETS-LINDGREN 3142C SEM003-02 2019-05-24 2022-05-23 (26-3000MHz) Sonoma Instrument Pre-amplifier 310N SEM005-04 2019-04-12 2020-04-11 Co Active Loop Antenna ETS-Lindgren 6502 SEM003-08 2017-08-22 2020-08-21 General used equipment Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shanghai Humidity/ Temperature Meteorological ZJ1-2B SEM002-03 2018-09-27 2019-09-26 Indicator Industry Factory Shanghai Humidity/ Temperature Meteorological ZJ1-2B SEM002-04 2018-09-27 2019-09-26 Indicator Industry Factory Humidity/ Temperature Mingle N/A SEM002-08 2018-09-27 2019-09-26 Indicator Changchun Barometer Meteorological DYM3 SEM002-01 2019-04-04 2020-04-03 Industry Factory

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 9 of 24 6 Radio Spectrum Technical Requirement 6.1 Antenna Requirement 6.1.1 Test Requirement: 47 CFR Part 15, Subpart C 15.203 6.1.2 Conclusion Standard Requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. EUT Antenna: The antenna is integrated on the main PCB and no consideration of replacement. The best case gain of the antenna is 0dBi. Antenna location: Refer to Appendix(Internal photos)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 10 of 24 7 Radio Spectrum Matter Test Results 7.1 20dB Bandwidth Test Requirement 47 CFR Part 15, Subpart C 15.215 Test Method: ANSI C63.10 (2013) Section 6.9.2 Limit: N/A 7.1.1 E.U.T. Operation Operating Environment: Temperature: 25 °C Humidity: 51 % RH Atmospheric Pressure: 1015 mbar Pretest these a:Charge mode_Keep the EUT charging(5W). modes to find b:Charge mode_Keep the EUT charging(7.5W). the worst case: c:Charge mode_Keep the EUT charging(10W). The worst case c:Charge mode_Keep the EUT charging(10W). for final test: 7.1.2 Test Setup Diagram 7.1.3 Measurement Procedure and Data Test Frequency(KHz) 20dB bandwidth (Hz) Limit (KHz) Results 163.851 26 N/A Pass

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 11 of 24 * RBW 10 Hz Marker 1 [T1 ] * VBW 30 Hz -39.58 dBm Ref -10 dBm * Att 20 dB SWT 1 s 163.850700000 kHz -10 ndB [T1] 20.00 dB BW 26.000000000 Hz -20 Temp 1 [T1 ndB] A -59.70 dBm 1 PK 163.837700000 kHz VIEW -30 Temp 2 [T1 ndB] -59.40 dBm 1 163.863700000 kHz -40 -50 T1 T2 -60 3DB -70 -80 -90 -100 -110 Center 163.851 kHz 10 Hz/ Span 100 Hz

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 12 of 24 7.2 Restricted Bands Test Requirement 47 CFR Part 15, Subpart C 15.205 Test Method: ANSI C63.10 (2013) Section 6.10.5 Limit: The fundamental wave can not fall in the restricted band 90KHz-110KHz 7.2.1 E.U.T. Operation Operating Environment: Temperature: 26.3 °C Humidity: 58.6 % RH Atmospheric Pressure: 1020 mbar Pretest these a:Charge mode_Keep the EUT charging(5W). modes to find b:Charge mode_Keep the EUT charging(7.5W). the worst case: c:Charge mode_Keep the EUT charging(10W). The worst case c:Charge mode_Keep the EUT charging(10W). for final test: 7.2.2 Test Setup Diagram 7.2.3 Measurement Procedure and Data

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 13 of 24 * RBW 1 kHz Marker 1 [T1 ] * VBW 3 kHz -26.34 dBm Ref -20 dBm Att 5 dB SWT 120 ms 137.115384615 kHz -20 OBW 81.730769231 kHz 1 Temp 1 [T1 OBW] -30 -41.44 dBm A 123.461538462 kHz 1 PK Temp 2 [T1 T2 OBW] VIEW T1 -40 -39.16 dBm 205.192307692 kHz -50 -60 -70 3DB -80 -90 -100 -110 -120 Start 100 kHz 12 kHz/ Stop 220 kHz According the test data of Radiated Emission(9-150KHz) in clause 7.3, the fundamental wave is not fall in the restricted band 90KHz-110KHz, the field strength also meet the 15.209 requirement, so this test is Pass.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 14 of 24 7.3 Radiated Emissions (9kHz-30MHz) Test Requirement 47 CFR Part 15, Subpart C 15.205 & 15.209 Test Method: ANSI C63.10 (2013) Section 6.4 Measurement Distance: 3m Limit: Frequency(MHz) Field strength(microvolts/meter) Measurement distance(meters) 0.009-0.490 2400/F(kHz) 300 0.490-1.705 24000/F(kHz) 30 1.705-30.0 30 30 Remark: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90kHz, 110-490kHz. Radiated emission limits in these three bands are based on measurements employing an average detector, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. If field strength is measured at only a single point, then that point shall be at the radial from the EUT that produces the maximum emission at the frequency being measured, as described in 5.4. If that point is closer to the EUT than λ/2π and the limit distance is greater than λ/2π, the measurement shall be extrapolated to the limit distance by conservatively presuming that the field strength decreases at a 40 dB/decade of distance rate to the λ/2π distance, and at a 20 dB/decade of distance rate beyond λ/2π. This shall be accomplished using Equation (2): FS(10m) = FS(30/300m) + 40log{d(near field)/d(10m)} + 20log{d(30/300m)/d(near field)} (2) If the single point measured is at a distance greater than λ/2π, then extrapolation to the limit distance shall be calculated using Equation (3): FS(10m) = FS(30/300m) + 20log{d(30/300m)/d(10m)} (3) If both the single point and the limit distance are equal to or closer to the EUT than λ/2π, then extrapolation to the limit distance shall be calculated using Equation (4): FS(10m) = FS(30/300m) + 40log{d(30/300m)/d(10m)} (4) Remark: dnear field = 47.77 / fMHz where fMHz is the frequency of the emission being measured in MHz.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 15 of 24 7.3.1 E.U.T. Operation Operating Environment: Temperature: 25 °C Humidity: 51 % RH Atmospheric Pressure: 1015 mbar Pretest these a:Charge mode_Keep the EUT charging(5W). modes to find b:Charge mode_Keep the EUT charging(7.5W). the worst case: c:Charge mode_Keep the EUT charging(10W). The worst case c:Charge mode_Keep the EUT charging(10W). for final test: 7.3.2 Test Setup Diagram 7.3.3 Measurement Procedure and Data For testing performed with the loop antenna, the center of the loop was positioned 1 m above the ground and positioned with its plane vertical at the specified distance from the EUT. During testing the loop was rotated about its vertical axis for maximum response at each azimuth and also investigated with the loop positioned in the horizontal plane. Only the worst position of vertical was shown in the report.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 16 of 24 Mode:c 9kHz-150KHz, Detector:Peak

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 17 of 24 150kHz-30MHz, Detector:Peak

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 18 of 24 7.4 Radiated Emissions (30MHz-1GHz) Test Requirement: 47 CFR Part 15, Subpart C 15.205 & 15.209 Test Method: ANSI C63.10 (2013) Section 6.5 Frequency Range: 30MHz to 1GHz Measurement Distance: 10m Limit: Frequency(MHz) Field strength(microvolts/meter) Measurement distance(meters) 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 Remark: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 19 of 24 7.4.1 E.U.T. Operation Operating Environment: Temperature: 25 °C Humidity: 51 % RH Atmospheric Pressure: 1015 mbar Pretest these a:Charge mode_Keep the EUT charging(5W). modes to find b:Charge mode_Keep the EUT charging(7.5W). the worst case: c:Charge mode_Keep the EUT charging(10W). The worst case c:Charge mode_Keep the EUT charging(10W). for final test: 7.4.2 Test Setup Diagram

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 20 of 24 7.4.3 Measurement Procedure and Data a. The EUT was placed on the top of a rotating table 0.8 meters above the ground for below 1GHz at a 3 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. g. Test the EUT in the lowest channel,the middle channel,the Highest channel h. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode,And found the X axis positioning which it is worse case. i. Repeat above procedures until all frequencies measured was complete. Remark: Level= Read Level+ Cable Loss+ Antenna Factor- Preamp Factor

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 21 of 24 Radiated Emission below 1GHz The test was performed at a 10m test site. According to below formulate and the test data at 10m test distance, L3 / L10 = D10 / D3 Note: L3: Level @ 3m distance. Unit: uV/m; L10: Level @ 10m distance. Unit: uV/m; D3: 3m distance. Unit: m D10: 10m distance. Unit: m The level at 3m test distance is below: Level @ Level @ Level @ Frequency Level @ Limit @ 3m Margin Ant. 10m 10m 3m (MHz) 3m (uV/m) (dBuV/m) (dB) Polarization (dBuV/m) (uV/m) (dBuV/m) 44.43 14.24 5.15 17.17 24.70 40.00 -15.30 H 119.86 15.19 5.75 19.16 25.65 43.50 -17.85 H 167.24 20.03 10.03 33.45 30.49 43.50 -13.01 H 305.68 20.60 10.72 35.72 31.06 46.00 -14.94 H 460.73 19.55 9.50 31.65 30.01 46.00 -15.99 H 929.01 28.83 27.64 92.13 39.29 46.00 -6.71 H 42.45 21.81 12.32 41.06 32.27 40.00 -7.73 V 123.70 15.72 6.11 20.36 26.18 43.50 -17.32 V 166.07 17.42 7.43 24.77 27.88 43.50 -15.62 V 232.53 19.29 9.22 30.72 29.75 46.00 -16.25 V 413.27 19.19 9.11 30.37 29.65 46.00 -16.35 V 945.44 27.97 25.03 83.44 38.43 46.00 -7.57 V

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 22 of 24 Mode: c; Polarization: Horizontal

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 23 of 24 Mode: c; Polarization: Vertical

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190301164301 Page: 24 of 24 8 Photographs 8.1 Test Setup Refer to Setup Photos 8.2 EUT Constructional Details (EUT Photos) Refer to EUT external and internal photos - End of the Report -


Document Created: 2019-10-23 00:51:33
Document Modified: 2019-10-23 00:51:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC