IHDT56XJ1 RF Exposure

FCC ID: IHDT56XJ1

RF Exposure Info

Download: PDF
FCCID_3950963

FCC SAR Test Report Report No. : FA861509 FCC SAR Test Report APPLICANT : Motorola Mobility LLC EQUIPMENT : Mobile Cellular Phone BRAND NAME : Motorola FCC ID : IHDT56XJ1 STANDARD : FCC 47 CFR Part 2 (2.1093) ANSI/IEEE C95.1-1992 IEEE 1528-2013 We, Sporton International (Kunshan) Inc., would like to declare that the tested sample has been evaluated in accordance with the procedures and had been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International (Kunshan) Inc., the test report shall not be reproduced except in full. Approved by: Mark Qu / Manager Sporton International (Kunshan) Inc. No.3-2 Ping-Xiang Rd, Kunshan Development Zone Kunshan City Jiangsu Province 215335 China Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 1 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Administration Data ...................................................................................................................................................... 5 3. Guidance Applied .......................................................................................................................................................... 5 4. Equipment Under Test (EUT) Information ................................................................................................................... 6 4.1 General Information ............................................................................................................................................... 6 4.2 General LTE SAR Test and Reporting Considerations ........................................................................................... 7 5. RF Exposure Limits....................................................................................................................................................... 9 5.1 Uncontrolled Environment ...................................................................................................................................... 9 5.2 Controlled Environment.......................................................................................................................................... 9 6. Specific Absorption Rate (SAR) ..................................................................................................................................10 6.1 Introduction ...........................................................................................................................................................10 6.2 SAR Definition .......................................................................................................................................................10 7. System Description and Setup ...................................................................................................................................11 7.1 E-Field Probe ........................................................................................................................................................12 7.2 Data Acquisition Electronics (DAE) .......................................................................................................................12 7.3 Phantom ................................................................................................................................................................13 7.4 Device Holder........................................................................................................................................................14 8. Measurement Procedures ...........................................................................................................................................15 8.1 Spatial Peak SAR Evaluation ................................................................................................................................15 8.2 Power Reference Measurement............................................................................................................................16 8.3 Area Scan .............................................................................................................................................................16 8.4 Zoom Scan ............................................................................................................................................................17 8.5 Volume Scan Procedures ......................................................................................................................................17 8.6 Power Drift Monitoring...........................................................................................................................................17 9. Test Equipment List .....................................................................................................................................................18 10. System Verification ....................................................................................................................................................19 10.1 Tissue Simulating Liquids ....................................................................................................................................19 10.2 Tissue Verification ...............................................................................................................................................20 10.3 System Performance Check Results...................................................................................................................21 11. Antenna Location .......................................................................................................................................................22 12. SAR Test Results .......................................................................................................................................................23 12.1 Head SAR ...........................................................................................................................................................24 12.2 Hotspot SAR .......................................................................................................................................................26 12.3 Body Worn Accessory SAR .................................................................................................................................28 12.4 Product specific 10g SAR ...................................................................................................................................29 12.5 Repeated SAR Measurement .............................................................................................................................30 13. Uncertainty Assessment ...........................................................................................................................................31 14. References ..................................................................................................................................................................32 Appendix A. Plots of System Performance Check Appendix B. Plots of High SAR Measurement Appendix C. DASY Calibration Certificate Appendix D. Test Setup Photos Appendix E. Original Report Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 2 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA861509 Rev. 01 Initial issue of report Jun. 28, 2018 Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 3 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 1. Statement of Compliance The maximum results of Specific Absorption Rate (SAR) found during testing for Motorola Mobility LLC, Mobile Cellular Phone, are as follows. Highest 1g SAR Summary Head Hotspot Body-worn Product Specific Equipment Frequency (Separation 0mm) (Separation 5mm) (Separation 5mm) (Separation 0mm) Class Band 1g SAR (W/kg) 10g SAR (W/kg) GSM850 0.21 0.34 0.34 0.56 GSM GSM1900 0.12 0.57 0.20 1.41 Band V 0.33 0.48 0.48 1.26 WCDMA Band II 0.15 0.73 0.25 1.80 BC0 0.42 0.43 0.44 1.57 CDMA2000 Licensed BC1 0.25 0.84 0.24 1.35 Band 13 0.26 0.37 0.37 1.24 Band 5 0.33 0.49 0.49 1.11 LTE Band 66/Band 4 0.47 1.15 0.44 1.63 Band 2 0.27 0.83 0.25 1.82 Band 7 0.59 0.34 0.34 1.43 DTS 2.4GHz WLAN 0.64 0.17 0.17 WLAN NII 5GHz WLAN 1.10 0.91 0.68 1.16 DSS Bluetooth 2.4GHz Bluetooth 0.47 0.17 0.17 Date of Testing: 2018/6/20 ~ 2018/6/26 This device is in compliance with Specific Absorption Rate (SAR) for general population/uncontrolled exposure limits (1.6 W/kg for Partial-Body 1g SAR, 4.0 W/kg for Product Specific 10g SAR) specified in FCC 47 CFR part 2 (2.1093) and ANSI/IEEE C95.1-1992, and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528-2013 and FCC KDB publications. Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 4 of 32 Form version. : 170509

seortrow cas._FCC SAR Test Report Report No. : FAS861509 2. Administration Data Testing Laboratory LCO Sporton International (Kunshan) Inc. No.3—2 Ping—Xiang Rd, Kunshan Development Zone Kunshan City Jiangsu Province 215335 China Test Site Location TEL : +86—512—57900158 FAX : +86—512—57900958 Applicant Company Name Motorola Mobility LLC Address 222 W,Merchandise Mart Plaza, Chicago IL 60654 USA Manufacturer Company Name Motorola Mobility LLC Address 222 W,Merchandise Mart Plaza, Chicago IL 60654 USA 3. Guidance Applied The Specific Absorption Rate (SAR) testing specification, method, and procedure for this device is in accordance with the following standards: > FCC 47 CFR Part 2 (2.1093) ANSVIEEE C95.1—1992 IEEE 1528—2013 FCC KDB 865664 DO1 SAR Measurement 100 MHz to 6 GHz v01r04 FCC KDB 865664 DO2 SAR Reporting vO1r02 FCC KDB 447498 DO1 General RF Exposure Guidance vO6 FCC KDB 648474 DO3 Wireless Chargers Battery Cover vQ1r04 FCC KDB 648474 D04 SAR Evaluation Considerations for Wireless Handsets v01r03 FCC KDB 248227 DO1 802.11 Wi—Fi SAR v02r02 FCC KDB 941225 DO1 3G SAR Procedures vO3r01 FCC KDB 941225 DO5 SAR for LTE Devices v02r05 FCC KDB 941225 DO5A Rel.10 LTE SAR Test Guidance v01r02 FCC KDB 941225 DO6 Hotspot Mode SAR v02r01 FCC KDB 616217 D04 SAR for laptop and tablets vO1r02 Sporton International (Kunshan) Inc. TEL : +86—512—57900158 / FAX : +86—512—57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDTSGXJ1 Page 5 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 4. Equipment Under Test (EUT) Information 4.1 General Information Product Feature & Specification Equipment Name Mobile Cellular Phone Brand Name Motorola FCC ID IHDT56XJ1 IMEI Code 355550090016176 GSM850: 824.2 MHz ~ 848.8 MHz GSM1900: 1850.2 MHz ~ 1909.8 MHz WCDMA Band II: 1852.4 MHz ~ 1907.6 MHz WCDMA Band V: 826.4 MHz ~ 846.6 MHz CDMA2000 BC0: 824.7 MHz ~ 848.31 MHz CDMA 2000 BC1: 1851.25 MHz ~ 1908.75 MHz LTE Band 2: 1850.7 MHz ~ 1909.3 MHz LTE Band 4: 1710.7 MHz ~ 1754.3 MHz LTE Band 5: 824.7 MHz ~ 848.3 MHz Wireless Technology and LTE Band 7: 2502.5 MHz ~ 2567.5 MHz Frequency Range LTE Band 13: 779.5 MHz ~ 784.5 MHz LTE Band 66: 1710.7 MHz ~ 1779.3 MHz WLAN 2.4GHz Band: 2412 MHz ~ 2462 MHz WLAN 5.2GHz Band: 5180 MHz ~ 5240 MHz WLAN 5.3GHz Band: 5260 MHz ~ 5320 MHz WLAN 5.5GHz Band: 5500 MHz ~ 5720 MHz WLAN 5.8GHz Band: 5745 MHz ~ 5825 MHz Bluetooth: 2402 MHz ~ 2480 MHz NFC : 13.56 MHz GSM/GPRS/EGPRS RMC/AMR 12.2Kbps HSDPA HSUPA DC-HSDPA HSPA+ (16QAM uplink is not supported) Mode CDMA2000 : 1xRTT/1xEv-Do(Rev.0)/1xEv-Do(Rev.A) LTE: QPSK, 16QAM, 64QAM WLAN 2.4GHz 802.11b/g/n HT20 WLAN 5GHz 802.11a/n HT20/HT40 WLAN 5GHz 802.11ac VHT20/VHT40/VHT80 Bluetooth v3.0+EDR, Bluetooth v4.2 LE, Bluetooth v5.0 LE NFC HW Version DVT2 SW Version fastboot_messi_verizon_oem_vzw_userdebug_8.1.0_ODX28.56_50ee_intcfg-test-keys_vzw GSM / (E)GPRS Class B – EUT cannot support Packet Switched and Circuit Switched Network Transfer mode simultaneously but can automatically switch between Packet and Circuit Switched Network. EUT Stage Identical Prototype Remark: 1. Add WPC accessory to include verification worst case found in the original report FCC ID: IHDT56XJ1 (Sporton Report No.FA851503) as appendix E performed testing. Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 6 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 4.2 General LTE SAR Test and Reporting Considerations Summarized necessary items addressed in KDB 941225 D05 v02r05 FCC ID IHDT56XJ1 Equipment Name Mobile Cellular Phone LTE Band 2: 1850.7 MHz ~ 1909.3 MHz LTE Band 4: 1710.7 MHz ~ 1754.3 MHz Operating Frequency Range of each LTE LTE Band 5: 824.7 MHz ~ 848.3 MHz transmission band LTE Band 7: 2502.5 MHz ~ 2567.5 MHz LTE Band 13: 779.5 MHz ~ 784.5 MHz LTE Band 66: 1710.7 MHz ~ 1779.3 MHz LTE Band 2:1.4MHz, 3MHz, 5MHz, 10MHz, 15MHz, 20MHz LTE Band 4:1.4MHz, 3MHz, 5MHz, 10MHz, 15MHz, 20MHz LTE Band 5:1.4MHz, 3MHz, 5MHz, 10MHz Channel Bandwidth LTE Band 7: 5MHz, 10MHz, 15MHz, 20MHz LTE Band 13: 5MHz, 10MHz LTE Band 66:1.4MHz, 3MHz, 5MHz, 10MHz, 15MHz, 20MHz Uplink Modulations Used QPSK, 16QAM and 64QAM LTE Voice / Data requirements Voice and Data LTE Release Version R11, Cat11 CA support Yes, Downlink Only LTE MPR permanently built-in by design In the base station simulator configuration, Network Setting value is set to NS_01 to disable LTE A-MPR A-MPR during SAR testing and the LTE SAR tests was transmitting on all TTI frames (Maximum TTI) A properly configured base station simulator was used for the SAR and power Spectrum plots for RB configuration measurement; therefore, spectrum plots for each RB allocation and offset configuration are not included in the SAR report. Yes 1. The device employs proximity sensors that detect the presence of the user’s body at the front or back faces of the device. When front or back body worn condition is detected, LTE B2 / B4 / B5 / B7 / B13 / B66 reduced power will be active. (P-sensor can’t work at detecting presence of the user’s body at the four edges of the device.) 2. When hotspot mode is enabled, power reduction will be activated to limit the maximum Power reduction applied to satisfy SAR power of LTE B2 / B4 / B5 / B7 / B13 / B66. compliance 3. For WWAN bands, this device hotspot reduced power and P-sensor reduced power level are the same. So only show one reduced power level for hotspot reduced power and P-sensor reduced power for this application. 4. The device additionally employs proximity sensors that detect the presence of tissue near the currently active transmit antenna, the handheld reduced power table which at LTE B2 / B4 / B7 / B66 reduced powers will be active. Inter-Band and Intra-Band possible combinations and the detail power verification please LTE Carrier Aggregation Combinations referred to section 13. This device supports maximum of 3 carriers in the downlink. Additional following LTE LTE Carrier Aggregation Additional Release features are not supported: Relay, HetNet, Enhanced MIMO, eICI, WiFi Offloading, Information MDH, eMBMA, Cross-Carrier Scheduling, Enhanced SC-FDMA. Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 7 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 Transmission (H, M, L) channel numbers and frequencies in each LTE band LTE Band 2 Bandwidth 1.4 MHz Bandwidth 3 MHz Bandwidth 5 MHz Bandwidth 10 MHz Bandwidth 15 MHz Bandwidth 20 MHz Freq. Freq. Freq. Freq. Freq. Freq. Ch. # Ch. # Ch. # Ch. # Ch. # Ch. # (MHz) (MHz) (MHz) (MHz) (MHz) (MHz) L 18607 1850.7 18615 1851.5 18625 1852.5 18650 1855 18675 1857.5 18700 1860 M 18900 1880 18900 1880 18900 1880 18900 1880 18900 1880 18900 1880 H 19193 1909.3 19185 1908.5 19175 1907.5 19150 1905 19125 1902.5 19100 1900 LTE Band 4 Bandwidth 1.4 MHz Bandwidth 3 MHz Bandwidth 5 MHz Bandwidth 10 MHz Bandwidth 15 MHz Bandwidth 20 MHz Freq. Freq. Freq. Freq. Freq. Freq. Ch. # Ch. # Ch. # Ch. # Ch. # Ch. # (MHz) (MHz) (MHz) (MHz) (MHz) (MHz) L 19957 1710.7 19965 1711.5 19975 1712.5 20000 1715 20025 1717.5 20050 1720 M 20175 1732.5 20175 1732.5 20175 1732.5 20175 1732.5 20175 1732.5 20175 1732.5 H 20393 1754.3 20385 1753.5 20375 1752.5 20350 1750 20325 1747.5 20300 1745 LTE Band 5 Bandwidth 1.4 MHz Bandwidth 3 MHz Bandwidth 5 MHz Bandwidth 10 MHz Ch. # Freq. (MHz) Ch. # Freq. (MHz) Ch. # Freq. (MHz) Ch. # Freq. (MHz) L 20407 824.7 20415 825.5 20425 826.5 20450 829 M 20525 836.5 20525 836.5 20525 836.5 20525 836.5 H 20643 848.3 20635 847.5 20625 846.5 20600 844 LTE Band 7 Bandwidth 5 MHz Bandwidth 10 MHz Bandwidth 15 MHz Bandwidth 20 MHz Ch. # Freq. (MHz) Ch. # Freq. (MHz) Ch. # Freq. (MHz) Ch. # Freq. (MHz) L 20775 2502.5 20800 2505 20825 2507.5 20850 2510 M 21100 2535 21100 2535 21100 2535 21100 2535 H 21425 2567.5 21400 2565 21375 2562.5 21350 2560 LTE Band 13 Bandwidth 5 MHz Bandwidth 10 MHz Channel # Freq.(MHz) Channel # Freq.(MHz) L 23205 779.5 M 23230 782 23230 782 H 23255 784.5 LTE Band 66 Bandwidth 1.4 MHz Bandwidth 3 MHz Bandwidth 5 MHz Bandwidth 10 MHz Bandwidth 15 MHz Bandwidth 20 MHz Freq. Freq. Freq. Freq. Freq. Freq. Ch. # Ch. # Ch. # Ch. # Ch. # Ch. # (MHz) (MHz) (MHz) (MHz) (MHz) (MHz) L 131979 1710.7 131987 1711.5 131997 1712.5 132022 1715 132047 1717.5 132072 1720 M 132322 1745 132322 1745 132322 1745 132322 1745 132322 1745 132322 1745 H 132665 1779.3 132657 1778.5 132647 1777.5 132622 1775 132597 1772.5 132572 1770 Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 8 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 5. RF Exposure Limits 5.1 Uncontrolled Environment Uncontrolled Environments are defined as locations where there is the exposure of individuals who have no knowledge or control of their exposure. The general population/uncontrolled exposure limits are applicable to situations in which the general public may be exposed or in which persons who are exposed as a consequence of their employment may not be made fully aware of the potential for exposure or cannot exercise control over their exposure. Members of the general public would come under this category when exposure is not employment-related; for example, in the case of a wireless transmitter that exposes persons in its vicinity. 5.2 Controlled Environment Controlled Environments are defined as locations where there is exposure that may be incurred by persons who are aware of the potential for exposure, (i.e. as a result of employment or occupation). In general, occupational/controlled exposure limits are applicable to situations in which persons are exposed as a consequence of their employment, who have been made fully aware of the potential for exposure and can exercise control over their exposure. The exposure category is also applicable when the exposure is of a transient nature due to incidental passage through a location where the exposure levels may be higher than the general population/uncontrolled limits, but the exposed person is fully aware of the potential for exposure and can exercise control over his or her exposure by leaving the area or by some other appropriate means. Limits for Occupational/Controlled Exposure (W/kg) Limits for General Population/Uncontrolled Exposure (W/kg) Whole-Body SAR is averaged over the entire body, partial-body SAR is averaged over any 1gram of tissue defined as a tissue volume in the shape of a cube. SAR for hands, wrists, feet and ankles is averaged over any 10 grams of tissue defined as a tissue volume in the shape of a cube. Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 9 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 6. Specific Absorption Rate (SAR) 6.1 Introduction SAR is related to the rate at which energy is absorbed per unit mass in an object exposed to a radio field. The SAR distribution in a biological body is complicated and is usually carried out by experimental techniques or numerical modeling. The standard recommends limits for two tiers of groups, occupational/controlled and general population/uncontrolled, based on a person’s awareness and ability to exercise control over his or her exposure. In general, occupational/controlled exposure limits are higher than the limits for general population/uncontrolled. 6.2 SAR Definition The SAR definition is the time derivative (rate) of the incremental energy (dW) absorbed by (dissipated in) an incremental mass (dm) contained in a volume element (dv) of a given density (ρ). The equation description is as below: 𝐝 𝐝𝐖 𝐝 𝐝𝐖 𝐒𝐀𝐑 = ( )= ( ) 𝐝𝐭 𝐝𝐦 𝐝𝐭 𝛒𝐝𝐯 SAR is expressed in units of Watts per kilogram (W/kg) 𝛔|𝐄|𝟐 𝐒𝐀𝐑 = 𝛒 Where: σ is the conductivity of the tissue, ρ is the mass density of the tissue and E is the RMS electrical field strength. Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 10 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 7. System Description and Setup The DASY system used for performing compliance tests consists of the following items:  A standard high precision 6-axis robot with controller, teach pendant and software. An arm extension for accommodating the data acquisition electronics (DAE).  An isotropic Field probe optimized and calibrated for the targeted measurement.  A data acquisition electronics (DAE) which performs the signal amplification, signal multiplexing, AD-conversion, offset measurements, mechanical surface detection, collision detection, etc. The unit is battery powered with standard or rechargeable batteries. The signal is optically transmitted to the EOC.  The Electro-optical converter (EOC) performs the conversion from optical to electrical signals for the digital communication to the DAE. To use optical surface detection, a special version of the EOC is required. The EOC signal is transmitted to the measurement server.  The function of the measurement server is to perform the time critical tasks such as signal filtering, control of the robot operation and fast movement interrupts.  The Light Beam used is for probe alignment. This improves the (absolute) accuracy of the probe positioning.  A computer running WinXP or Win7 and the DASY5 software.  Remote control and teach pendant as well as additional circuitry for robot safety such as warning lamps, etc.  The phantom, the device holder and other accessories according to the targeted measurement. Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 11 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 7.1 E-Field Probe The SAR measurement is conducted with the dosimetric probe (manufactured by SPEAG).The probe is specially designed and calibrated for use in liquid with high permittivity. The dosimetric probe has special calibration in liquid at different frequency. This probe has a built in optical surface detection system to prevent from collision with phantom. <EX3DV4 Probe> Symmetric design with triangular core Built-in shielding against static charges Construction PEEK enclosure material (resistant to organic solvents, e.g., DGBE) 10 MHz – >6 GHz Frequency Linearity: ±0.2 dB (30 MHz – 6 GHz) ±0.3 dB in TSL (rotation around probe axis) Directivity ±0.5 dB in TSL (rotation normal to probe axis) 10 µW/g – >100 mW/g Dynamic Range Linearity: ±0.2 dB (noise: typically <1 µW/g) Overall length: 337 mm (tip: 20 mm) Dimensions Tip diameter: 2.5 mm (body: 12 mm) Typical distance from probe tip to dipole centers: 1 mm 7.2 Data Acquisition Electronics (DAE) The data acquisition electronics (DAE) consists of a highly sensitive electrometer-grade preamplifier with auto-zeroing, a channel and gain-switching multiplexer, a fast 16 bit AD-converter and a command decoder and control logic unit. Transmission to the measurement server is accomplished through an optical downlink for data and status information as well as an optical uplink for commands and the clock. The input impedance of the DAE is 200 MOhm; the inputs are symmetrical and floating. Common mode rejection is above 80 dB. Photo of DAE Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 12 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 7.3 Phantom <SAM Twin Phantom> 2 ± 0.2 mm; Shell Thickness Center ear point: 6 ± 0.2 mm Filling Volume Approx. 25 liters Length: 1000 mm; Width: 500 mm; Height: Dimensions adjustable feet Measurement Areas Left Hand, Right Hand, Flat Phantom The bottom plate contains three pair of bolts for locking the device holder. The device holder positions are adjusted to the standard measurement positions in the three sections. A white cover is provided to tap the phantom during off-periods to prevent water evaporation and changes in the liquid parameters. On the phantom top, three reference markers are provided to identify the phantom position with respect to the robot. <ELI Phantom> Shell Thickness 2 ± 0.2 mm (sagging: <1%) Filling Volume Approx. 30 liters Major ellipse axis: 600 mm Dimensions Minor axis: 400 mm The ELI phantom is intended for compliance testing of handheld and body-mounted wireless devices in the frequency range of 30 MHz to 6 GHz. ELI4 is fully compatible with standard and all known tissue simulating liquids. Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 13 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 7.4 Device Holder <Mounting Device for Hand-Held Transmitter> In combination with the Twin SAM V5.0/V5.0c or ELI phantoms, the Mounting Device for Hand-Held Transmitters enables rotation of the mounted transmitter device to specified spherical coordinates. At the heads, the rotation axis is at the ear opening. Transmitter devices can be easily and accurately positioned according to IEC 62209-1, IEEE 1528, FCC, or other specifications. The device holder can be locked for positioning at different phantom sections (left head, right head, flat). And upgrade kit to Mounting Device to enable easy mounting of wider devices like big smart-phones, e-books, small tablets, etc. It holds devices with width up to 140 mm. Mounting Device for Hand-Held Mounting Device Adaptor for Wide-Phones Transmitters <Mounting Device for Laptops and other Body-Worn Transmitters> The extension is lightweight and made of POM, acrylic glass and foam. It fits easily on the upper part of the mounting device in place of the phone positioned. The extension is fully compatible with the SAM Twin and ELI phantoms. Mounting Device for Laptops Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 14 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 8. Measurement Procedures The measurement procedures are as follows: <Conducted power measurement> (a) For WWAN power measurement, use base station simulator to configure EUT WWAN transmission in conducted connection with RF cable, at maximum power in each supported wireless interface and frequency band. (b) Read the WWAN RF power level from the base station simulator. (c) For WLAN/BT power measurement, use engineering software to configure EUT WLAN/BT continuously transmission, at maximum RF power in each supported wireless interface and frequency band (d) Connect EUT RF port through RF cable to the power meter, and measure WLAN/BT output power <SAR measurement> (a) Use base station simulator to configure EUT WWAN transmission in radiated connection, and engineering software to configure EUT WLAN/BT continuously transmission, at maximum RF power, in the highest power channel. (b) Place the EUT in the positions as Appendix D demonstrates. (c) Set scan area, grid size and other setting on the DASY software. (d) Measure SAR results for the highest power channel on each testing position. (e) Find out the largest SAR result on these testing positions of each band (f) Measure SAR results for other channels in worst SAR testing position if the reported SAR of highest power channel is larger than 0.8 W/kg According to the test standard, the recommended procedure for assessing the peak spatial-average SAR value consists of the following steps: (a) Power reference measurement (b) Area scan (c) Zoom scan (d) Power drift measurement 8.1 Spatial Peak SAR Evaluation The procedure for spatial peak SAR evaluation has been implemented according to the test standard. It can be conducted for 1g and 10g, as well as for user-specific masses. The DASY software includes all numerical procedures necessary to evaluate the spatial peak SAR value. The base for the evaluation is a "cube" measurement. The measured volume must include the 1g and 10g cubes with the highest averaged SAR values. For that purpose, the center of the measured volume is aligned to the interpolated peak SAR value of a previously performed area scan. The entire evaluation of the spatial peak values is performed within the post-processing engine (SEMCAD). The system always gives the maximum values for the 1g and 10g cubes. The algorithm to find the cube with highest averaged SAR is divided into the following stages: (a) Extraction of the measured data (grid and values) from the Zoom Scan (b) Calculation of the SAR value at every measurement point based on all stored data (A/D values and measurement parameters) (c) Generation of a high-resolution mesh within the measured volume (d) Interpolation of all measured values form the measurement grid to the high-resolution grid (e) Extrapolation of the entire 3-D field distribution to the phantom surface over the distance from sensor to surface (f) Calculation of the averaged SAR within masses of 1g and 10g Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 15 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 8.2 Power Reference Measurement The Power Reference Measurement and Power Drift Measurements are for monitoring the power drift of the device under test in the batch process. The minimum distance of probe sensors to surface determines the closest measurement point to phantom surface. This distance cannot be smaller than the distance of sensor calibration points to probe tip as defined in the probe properties. 8.3 Area Scan The area scan is used as a fast scan in two dimensions to find the area of high field values, before doing a fine measurement around the hot spot. The sophisticated interpolation routines implemented in DASY software can find the maximum found in the scanned area, within a range of the global maximum. The range (in dB0 is specified in the standards for compliance testing. For example, a 2 dB range is required in IEEE standard 1528 and IEC 62209 standards, whereby 3 dB is a requirement when compliance is assessed in accordance with the ARIB standard (Japan), if only one zoom scan follows the area scan, then only the absolute maximum will be taken as reference. For cases where multiple maximums are detected, the number of zoom scans has to be increased accordingly. Area scan parameters extracted from FCC KDB 865664 D01v01r04 SAR measurement 100 MHz to 6 GHz. Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 16 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 8.4 Zoom Scan Zoom scans are used assess the peak spatial SAR values within a cubic averaging volume containing 1 gram and 10 gram of simulated tissue. The zoom scan measures points (refer to table below) within a cube shoes base faces are centered on the maxima found in a preceding area scan job within the same procedure. When the measurement is done, the zoom scan evaluates the averaged SAR for 1 gram and 10 gram and displays these values next to the job’s label. Zoom scan parameters extracted from FCC KDB 865664 D01v01r04 SAR measurement 100 MHz to 6 GHz. 8.5 Volume Scan Procedures The volume scan is used for assess overlapping SAR distributions for antennas transmitting in different frequency bands. It is equivalent to an oversized zoom scan used in standalone measurements. The measurement volume will be used to enclose all the simultaneous transmitting antennas. For antennas transmitting simultaneously in different frequency bands, the volume scan is measured separately in each frequency band. In order to sum correctly to compute the 1g aggregate SAR, the EUT remain in the same test position for all measurements and all volume scan use the same spatial resolution and grid spacing. When all volume scan were completed, the software, SEMCAD postprocessor can combine and subsequently superpose these measurement data to calculating the multiband SAR. 8.6 Power Drift Monitoring All SAR testing is under the EUT install full charged battery and transmit maximum output power. In DASY measurement software, the power reference measurement and power drift measurement procedures are used for monitoring the power drift of EUT during SAR test. Both these procedures measure the field at a specified reference position before and after the SAR testing. The software will calculate the field difference in dB. If the power drifts more than 5%, the SAR will be retested. Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 17 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 9. Test Equipment List Calibration Manufacturer Name of Equipment Type/Model Serial Number Last Cal. Due Date SPEAG 750MHz System Validation Kit D750V3 1065 2017/12/4 2018/12/3 SPEAG 835MHz System Validation Kit D835V2 4d091 2017/12/5 2018/12/4 SPEAG 1750MHz System Validation Kit D1750V2 1069 2017/12/5 2018/12/4 SPEAG 1900MHz System Validation Kit D1900V2 5d118 2017/12/6 2018/12/5 SPEAG 2450MHz System Validation Kit D2450V2 840 2017/12/7 2018/12/6 SPEAG 2600MHz System Validation Kit D2600V2 1061 2017/12/7 2018/12/6 SPEAG 5000MHz System Validation Kit D5GHzV2 1006 2017/9/26 2018/9/25 SPEAG Data Acquisition Electronics DAE4 1210 2018/5/28 2019/5/27 SPEAG Dosimetric E-Field Probe EX3DV4 3857 2018/5/31 2019/5/30 SPEAG SAM Twin Phantom QD 000 P40 CB TP-1542 NCR NCR SPEAG SAM Twin Phantom QD 000 P40 CB TP-1644 NCR NCR SPEAG Phone Positioner N/A N/A NCR NCR Anritsu Radio communication analyzer MT8820C 6201563814 2018/1/18 2019/1/17 Agilent Wireless Communication Test Set E5515C MY52102706 2018/4/17 2019/4/16 Agilent ENA Series Network Analyzer E5071C MY46111157 2018/4/17 2019/4/16 SPEAG DAK Kit DAK3.5 1146 2017/7/18 2018/7/17 R&S Signal Generator SML03 103818 2017/8/17 2018/8/16 Anritsu Power Meter ML2495A 1218006 2017/10/6 2018/10/5 Anritsu Power Sensor MA2411B 1207363 2017/10/6 2018/10/5 R&S CBT BLUETOOTH TESTER CBT 100783 2017/8/8 2018/8/7 EXA Spectrum Analyzer FSV7 101742 2018/1/19 2019/1/18 Testo Hygrometer 608-H1 1241332096 2017/8/21 2018/8/20 FLUKE DIGITAC THERMOMETER 51II 97240029 2017/8/3 2018/8/2 ARRA Power Divider A3200-2 N/A Note MCL Attenuation1 BW-S10W5+ N/A Note MCL Attenuation2 BW-S10W5+ N/A Note MCL Attenuation3 BW-S10W5+ N/A Note Agilent Dual Directional Coupler 778D 50422 Note PASTERNACK Dual Directional Coupler PE2214-10 N/A Note AR Amplifier 5S1G4 333096 Note mini-circuits Amplifier ZVE-3W-83+ 162601250 Note Note: Prior to system verification and validation, the path loss from the signal generator to the system check source and the power meter, which includes the amplifier, cable, attenuator and directional coupler, was measured by the network analyzer. The reading of the power meter was offset by the path loss difference between the path to the power meter and the path to the system check source to monitor the actual power level fed to the system check source. Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 18 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 10. System Verification 10.1 Tissue Simulating Liquids For the measurement of the field distribution inside the SAM phantom with DASY, the phantom must be filled with around 25 liters of homogeneous body tissue simulating liquid. For head SAR testing, the liquid height from the ear reference point (ERP) of the phantom to the liquid top surface is larger than 15 cm, which is shown in Fig. 10.1. For body SAR testing, the liquid height from the center of the flat phantom to the liquid top surface is larger than 15 cm, which is shown in Fig. 10.2. Fig 11.1Photo of Liquid Height for Head SAR Fig 11.2 Photo of Liquid Height for Body SAR Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 19 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 10.2 Tissue Verification The following tissue formulations are provided for reference only as some of the parameters have not been thoroughly verified. The composition of ingredients may be modified accordingly to achieve the desired target tissue parameters required for routine SAR evaluation. Frequency Water Sugar Cellulose Salt Preventol DGBE Conductivity Permittivity (MHz) (%) (%) (%) (%) (%) (%) (σ) (εr) For Head 750 41.1 57.0 0.2 1.4 0.2 0 0.89 41.9 835 40.3 57.9 0.2 1.4 0.2 0 0.90 41.5 1800, 1900, 2000 55.2 0 0 0.3 0 44.5 1.40 40.0 2450 55.0 0 0 0 0 45.0 1.80 39.2 2600 54.8 0 0 0.1 0 45.1 1.96 39.0 For Body 750 51.7 47.2 0 0.9 0.1 0 0.96 55.5 835 50.8 48.2 0 0.9 0.1 0 0.97 55.2 1800, 1900, 2000 70.2 0 0 0.4 0 29.4 1.52 53.3 2450 68.6 0 0 0 0 31.4 1.95 52.7 2600 68.1 0 0 0.1 0 31.8 2.16 52.5 Simulating Liquid for 5GHz, Manufactured by SPEAG Ingredients (% by weight) Water 64~78% Mineral oil 11~18% Emulsifiers 9~15% Additives and Salt 2~3% <Tissue Dielectric Parameter Check Results> Liquid Delta Delta Frequency Tissue Temp. Conductivity Permittivity Conductivity Permittivity Limit (σ) (εr) Date (MHz) Type (σ) (εr) Target (σ) Target (εr) (%) (℃) (%) (%) 750 Head 22.6 0.912 42.825 0.89 41.90 2.47 2.21 ±5 2018/6/20 835 Head 22.8 0.908 42.198 0.90 41.50 0.89 1.68 ±5 2018/6/23 1750 Head 22.6 1.325 39.218 1.37 40.10 -3.28 -2.20 ±5 2018/6/23 1900 Head 22.7 1.400 40.573 1.40 40.00 0.00 1.43 ±5 2018/6/23 2450 Head 22.6 1.823 38.343 1.80 39.20 1.28 -2.19 ±5 2018/6/25 2600 Head 22.7 1.997 37.741 1.96 39.00 1.89 -3.23 ±5 2018/6/25 5250 Head 22.6 4.565 36.009 4.71 35.95 -3.08 0.16 ±5 2018/6/23 5600 Head 22.7 4.968 35.220 5.07 35.50 -2.01 -0.79 ±5 2018/6/23 5750 Head 22.8 5.147 34.924 5.22 35.35 -1.40 -1.21 ±5 2018/6/23 750 Body 22.8 0.968 56.659 0.96 55.50 0.83 2.09 ±5 2018/6/20 835 Body 22.8 0.972 55.162 0.97 55.20 0.21 -0.07 ±5 2018/6/26 1750 Body 22.8 1.443 54.693 1.49 53.40 -3.15 2.42 ±5 2018/6/25 1900 Body 22.8 1.514 52.808 1.52 53.30 -0.39 -0.92 ±5 2018/6/25 2450 Body 22.7 1.976 53.443 1.95 52.70 1.33 1.41 ±5 2018/6/24 2600 Body 22.7 2.186 52.894 2.16 52.50 1.20 0.75 ±5 2018/6/24 5250 Body 22.6 5.506 47.953 5.36 48.95 2.72 -2.04 ±5 2018/6/24 5600 Body 22.7 5.953 47.365 5.77 48.50 3.17 -2.34 ±5 2018/6/24 5750 Body 22.8 6.154 47.115 5.94 48.28 3.60 -2.41 ±5 2018/6/24 Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 20 of 32 Form version. : 170509

sportow cas. _FCC SAR Test Report Report No. : FA861509 10.3 System Performance Check Results Comparing to the original SAR value provided by SPEAG, the verification data should be within its specification of 10 %. Below table shows the target SAR and measured SAR after normalized to 1W input power. The table below indicates the system performance check can meet the variation criterion and the plots can be referred to %fi'*&fi]glfifiifi, of this report. <1g SAR> Tb Measured Targeted Normalized Date Frmll’_lez’)“’y T.:.ss e 9 %’},\'IE lallarer yl YP° (mWw) Cns (Wikg) 2018/6/20 750 Head 250 3857 1210 2.05 8.33 8.2 2018/6/23 835 Head 250 40091 3857 1210 2.45 9.48 9.8 3.38 2018/6/23 1750 Head 250 1069 3857 1210 8.89 37.00 35.56 —3.89 2018/6/23 1900 Head 250 5d118 3857 1210 9.70 39.70 36.5 —2.27 2018/6/25 2450 Head 250 840 3857 1210 12.60 52.30 50.4 —3.63 2018/6/25 2600 Head 250 1061 3857 1210 14.00 58.20 56 —3.78 2018/6/23 5250 Head 100 1006 3857 1210 7.27 78.30 72.7 —7.15 2018/6/23 5600 Head 100 1006 3857 1210 7.85 85.00 78.5 —7.65 2018/6/23 5750 Head 100 1006 3857 1210 7.34 78.50 73.4 —6.50 2018/6/20 750 Body 250 1065 3857 1210 2.22 8.72 8.83 1.83 2018/6/26 835 Body 250 40091 3857 1210 2.60 9.72 10.4 7.00 2018/6/25 1750 Body 250 1069 3857 1210 9.74 38.00 38.96 2.53 2018/6/25 1900 Body 250 5d118 3857 1210 10.40 40.40 41.6 2.97 2018/6/24 2450 Body 250 840 3857 1210 13.00 51.90 52 0.19 2018/6/24 2600 Body 250 1061 3857 1210 13.90 56.40 55.6 ~1.42 2018/6/24 5250 Body 100 1006 3857 1210 7.23 77.00 72.3 —6.10 2018/6/24 5600 Body 100 1006 3857 1210 7.68 80.10 76.8 4.12 2018/6/24 5750 Body 100 1006 3857 1210 6.96 75.10 69.6 —7.32 <10g SAR> 2018/6/20 2018/6/26 2018/6725 2018/6725 2018/6724 2018/6724 2018/6724 Tuning z y otomont x 30 Probe posiioner [ s \ a Fist Phantom ( J U / Dipote o Dir.Couplor Signat 12 namp»—lLow [Az |—[ saB 1pnpsnms 3 »—I {eanamor L— |Pass f— Cable ait W aus i (eut [ Ante (emd I Sporton International (Kunshan) Inc. TEL : +86—512—57900158 / FAX : +86—512—57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDTSEXJ1 Page 21 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 Fig 11.3.1 System Performance Check Setup Fig 11.3.2 Setup Photo 11. Antenna Location Top Side 77mm NFC Antenna WLAN & BT Antenna Camera Right Side 155mm 165mm Left Side WWAN Antenna 2 WWAN Antenna 1 Back View Bottom Side Antenna Support Band GSM: 850 /1900 WCDMA: B2 / B5 WWAN Antenna 1 CDMA: BC0 / BC1 LTE: B2 / B4 / B5 / B13 / B66 WWAN Antenna 2 LTE: B7 WLAN 2.4GHz WLAN & BT Antenna WLAN 5GHz Bluetooth NFC Antenna NFC Distance of the Antenna to the EUT surface/edge Antennas Back Front Top Side Bottom Side Right Side Left Side WWAN Antenna 1 ≤ 25mm ≤ 25mm >25mm ≤ 25mm ≤ 25mm ≤ 25mm WWAN Antenna 2 ≤ 25mm ≤ 25mm >25mm ≤ 25mm ≤ 25mm >25mm WLAN & BT ≤ 25mm ≤ 25mm ≤ 25mm >25mm >25mm ≤ 25mm Positions for SAR tests; Hotspot mode Antennas Back Front Top Side Bottom Side Right Side Left Side WWAN Antenna 1 Yes Yes No Yes Yes Yes WWAN Antenna 2 Yes Yes No Yes Yes No Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 22 of 32 Form version. : 170509

seortrow cas._FCC SAR Test Report Report No. : FAS861509 WLAN & BT | Yes | Yes | Yes | No | No | Yes | General Note: Referring to KDB 941225 D06 v02r01, when the overall device length and width are z Scm*Scm, the test distance is 10 mm. SAR must be measured for all sides and surfaces with a transmitting antenna located within 25mm from that surface or edge. 12. SAR Test Results General Note: 1. Per KDB 447498 DO1V06, the reported SAR is the measured SAR value adjusted for maximum tune—up tolerance a. Tune—up scaling Factor = tune—up limit power {mW) / EUT RF power (mW), where tune—up limit is the maximum rated power among all production units b. For SAR testing of WLAN signal with non—100% duty cycle, the measured SAR is scaled—up by the duty cycle scaling factor which is equal to "1/{duty cycle)" c. For WWAN: Reported SAR(W/kg)= Measured SAR(W/kg)*Tune—up Scaling Factor d. For WLAN/Bluetooth: Reported SAR(Wi/kg)= Measured SAR(W/kg)* Duty Cycle scaling factor * Tune—up scaling factor 2. Per KDB 447498 DO1v06, for each exposure position, testing of other required channels within the operating mode of a frequency band is not required when the reported 1—g or 10—g SAR for the mid—band or highest output power channel is <0.8 Wikg or 2.0 Wikg, for 1—g or 10—g respectively, when the transmission band is S 100 MHz <0.6 Wikg or 1.5 Wikg, for 1—g or 10—g respectively, when the transmission band is between 100 MHz and 200 MHz + <0.4 Wikg or 1.0 Wikg, for 1—g or 10—g respectively, when the transmission band is > 200 MHz 3. Per KDB 865664 DO1v01r04, for each frequency band, repeated SAR measurement is required when the measured SAR is > 0.8Wikg 4. Initially, the handset must be tested according to all applicable SAR test procedures using the normal battery cover (without the wireless charging hardware). The highest SAR reported for each wireless technology {1xRTT, EVDO, WCDMA, GSM, Wi—Fi ete.), frequency band, operating mode (different modes/configurations within each wireless technology) and exposure condition (head, body—worn accessory, hotspot mode, etc.) must be repeated using the wireless charging battery cover 5. in this report all the conducted power, tune—up, power reduction mechanism is referring to original report as appendix E to be used for the testing Sporton International (Kunshan) Inc. TEL : +86—512—57900158 / FAX : +86—512—57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDTSGXJ1 Page 23 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 12.1 Head SAR <GSM SAR> Average Tune-Up Tune-up Power Measured Reported Plot Test Power Freq. Band Mode Ch. Power Limit Scaling Drift 1g SAR 1g SAR No. Position Mode (MHz) (dBm) (dBm) Factor (dB) (W/kg) (W/kg) 01 GSM850 GPRS 3 Tx slots Left Cheek Full 251 848.8 30.31 31.00 1.172 0.09 0.180 0.211 02 GSM1900 GPRS 3 Tx slots Right Cheek Full 810 1909.8 26.87 28.00 1.297 0.07 0.092 0.119 <WCDMA SAR> Average Tune-Up Tune-up Power Measured Reported Plot Test Power Freq. Band Mode Ch. Power Limit Scaling Drift 1g SAR 1g SAR No. Position Mode (MHz) (dBm) (dBm) Factor (dB) (W/kg) (W/kg) 03 WCDMA Band V RMC 12.2Kbps Left Cheek Full 4182 836.4 23.30 24.00 1.175 0.06 0.283 0.332 04 WCDMA Band II RMC 12.2Kbps Right Cheek Full 9538 1907.6 23.52 24.00 1.117 0.07 0.137 0.153 <CDMA2000 SAR> Average Tune-Up Tune-up Power Measured Reported Plot Test Power Freq. Band Mode Ch. Power Limit Scaling Drift 1g SAR 1g SAR No. Position Mode (MHz) (dBm) (dBm) Factor (dB) (W/kg) (W/kg) 05 CDMA2000 BC0 RC3 SO55 Left Cheek Full 777 848.31 24.15 25.00 1.216 0.1 0.342 0.416 06 CDMA2000 BC1 RC3 SO55 Right Cheek Full 1175 1908.75 23.91 25.00 1.285 0.06 0.196 0.252 <LTE SAR> Average Tune-Up Tune-up Power Measured Reported Plot BW RB RB Test Power Freq. Band Modulation Ch. Power Limit Scaling Drift 1g SAR 1g SAR No. (MHz) Size Offset Position Mode (MHz) (dBm) (dBm) Factor (dB) (W/kg) (W/kg) 07 LTE Band 13 10M QPSK 1 0 Left Cheek Full 23230 782 23.00 24.00 1.259 0.02 0.206 0.259 08 LTE Band 5 10M QPSK 1 25 Left Cheek Full 20525 836.5 23.00 24.00 1.259 0.08 0.259 0.326 09 LTE Band 66 20M QPSK 1 0 Right Cheek Full 132572 1770 23.10 24.00 1.230 -0.03 0.382 0.470 10 LTE Band 2 20M QPSK 1 0 Right Cheek Full 19100 1900 23.33 24.00 1.167 0.05 0.231 0.270 11 LTE Band 7 20M QPSK 1 0 Right Cheek Full 20850 2510 22.95 24.00 1.274 0.02 0.465 0.592 <WLAN 2.4GHz SAR> Duty Average Tune-Up Tune-up Duty Power Measured Reported Plot Test Freq. Cycle Band Mode Power Ch. Limit Scaling Cycle Drift 1g SAR 1g SAR No. Position (MHz) Scaling (dBm) (dBm) Factor % (dB) (W/kg) (W/kg) Factor 12 WLAN2.4GHz 802.11b 1Mbps Right Cheek 11 2462 16.79 17.00 1.050 100 1.000 -0.02 0.613 0.643 <WLAN 5GHz SAR> Duty Average Tune-Up Tune-up Duty Power Measured Reported Plot Test Freq. Cycle Band Mode Ch. Power Limit Scaling Cycle Drift 1g SAR 1g SAR No. Position (MHz) Scaling (dBm) (dBm) Factor % (dB) (W/kg) (W/kg) Factor WLAN5.3GHz 802.11a 6Mbps Right Cheek 64 5320 17.23 17.50 1.064 98.28 1.018 0.03 0.811 0.879 13 WLAN5.3GHz 802.11a 6Mbps Right Cheek 60 5300 17.27 17.50 1.054 98.28 1.018 0.03 0.936 1.005 WLAN5.5GHz 802.11a 6Mbps Right Cheek 100 5500 17.07 17.50 1.104 98.28 1.018 0.06 0.980 1.101 14 WLAN5.5GHz 802.11a 6Mbps Right Cheek 116 5580 17.18 17.50 1.076 98.28 1.018 0.08 0.882 0.967 15 WLAN 5.8GHz 802.11a 6Mbps Right Cheek 157 5785 16.89 17.50 1.151 98.28 1.018 0.05 0.565 0.662 Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 24 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 <Bluetooth SAR> Duty Average Tune-Up Tune-up Duty Power Measured Reported Plot Test Freq. Cycle Band Mode Ch. Power Limit Scaling Cycle Drift 1g SAR 1g SAR No. Position (MHz) Scaling (dBm) (dBm) Factor % (dB) (W/kg) (W/kg) Factor 16 Bluetooth 1Mbps Right Cheek 0 2402 16.52 16.60 1.019 77.02 1.082 -0.01 0.425 0.468 Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 25 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 12.2 Hotspot SAR <GSM SAR> Average Tune-Up Tune-up Power Measured Reported Plot Test Gap Power Freq. Band Mode Ch. Power Limit Scaling Drift 1g SAR 1g SAR No. Position (mm) Mode (MHz) (dBm) (dBm) Factor (dB) (W/kg) (W/kg) 17 GSM850 GPRS 3 Tx slots Back 5 Hotspot On 251 848.8 28.30 29.50 1.318 0.13 0.259 0.341 18 GSM1900 GPRS 4 Tx slots Bottom Side 5 Hotspot On 661 1880 18.65 19.00 1.084 0.05 0.525 0.569 <WCDMA SAR> Average Tune-Up Tune-up Power Measured Reported Plot Test Gap Power Freq. Band Mode Ch. Power Limit Scaling Drift 1g SAR 1g SAR No. Position (mm) Mode (MHz) (dBm) (dBm) Factor (dB) (W/kg) (W/kg) 19 WCDMA Band V RMC 12.2Kbps Back 5 Hotspot On 4233 846.6 20.74 21.80 1.276 -0.01 0.377 0.481 20 WCDMA Band II RMC 12.2Kbps Bottom Side 5 Hotspot On 9538 1907.6 12.68 13.80 1.294 0.03 0.566 0.733 <CDMA2000 SAR> Average Tune-Up Tune-up Power Measured Reported Plot Test Gap Power Freq. Band Mode Ch. Power Limit Scaling Drift 1g SAR 1g SAR No. Position (mm) Mode (MHz) (dBm) (dBm) Factor (dB) (W/kg) (W/kg) 21 CDMA2000 BC0 RTAP 153.6Kbps Back 5 Hotspot On 777 848.31 19.89 21.00 1.291 0.06 0.332 0.429 22 CDMA2000 BC1 RTAP 153.6Kbps Bottom Side 5 Hotspot On 25 1851.25 12.66 14.00 1.361 -0.03 0.618 0.841 CDMA2000 BC1 RTAP 153.6Kbps Bottom Side 5 Hotspot On 600 1880 12.75 14.00 1.334 -0.01 0.587 0.783 CDMA2000 BC1 RTAP 153.6Kbps Bottom Side 5 Hotspot On 1175 1908.75 12.88 14.00 1.294 -0.09 0.566 0.733 <LTE SAR> Average Tune-Up Tune-up Power Measured Reported Plot BW RB RB Test Gap Power Freq. Band Modulation Ch. Power Limit Scaling Drift 1g SAR 1g SAR No. (MHz) Size Offset Position (mm) Mode (MHz) (dBm) (dBm) Factor (dB) (W/kg) (W/kg) 23 LTE Band 13 10M QPSK 1 0 Back 5 Hotspot On 23230 782 21.14 22.00 1.219 0.04 0.306 0.373 24 LTE Band 5 10M QPSK 1 25 Back 5 Hotspot On 20525 836.5 20.76 21.80 1.271 0.04 0.389 0.494 LTE Band 66 20M QPSK 50 0 Bottom Side 5 Hotspot On 132322 1745 14.46 15.30 1.213 -0.02 0.923 1.120 LTE Band 66 20M QPSK 50 0 Bottom Side 5 Hotspot On 132072 1720 14.40 15.30 1.230 0.09 0.897 1.104 25 LTE Band 66 20M QPSK 50 0 Bottom Side 5 Hotspot On 132572 1770 14.48 15.30 1.208 0.03 0.952 1.150 26 LTE Band 2 20M QPSK 1 0 Bottom Side 5 Hotspot On 18700 1860 12.82 14.00 1.312 0.01 0.629 0.825 LTE Band 2 20M QPSK 1 0 Bottom Side 5 Hotspot On 18900 1880 13.00 14.00 1.259 0.06 0.642 0.808 LTE Band 2 20M QPSK 1 0 Bottom Side 5 Hotspot On 19100 1900 13.08 14.00 1.236 0.08 0.650 0.803 27 LTE Band 7 20M QPSK 50 0 Back 5 Hotspot On 20850 2510 15.25 16.20 1.245 0.05 0.276 0.343 <WLAN 2.4GHz SAR> Duty Average Tune-Up Tune-up Duty Power Measured Reported Plot Test Gap Freq. Cycle Band Mode Ch. Power Limit Scaling Cycle Drift 1g SAR 1g SAR No. Position (mm) (MHz) Scaling (dBm) (dBm) Factor % (dB) (W/kg) (W/kg) Factor 28 WLAN2.4GHz 802.11b 1Mbps Back 5 11 2462 16.79 17.00 1.050 100 1.000 0.01 0.165 0.173 Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 26 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 <WLAN 5GHz SAR> Duty Average Tune-Up Tune-up Duty Power Measured Reported Plot Test Gap Freq. Cycle Band Mode Ch. Power Limit Scaling Cycle Drift 1g SAR 1g SAR No. Position (mm) (MHz) Scaling (dBm) (dBm) Factor % (dB) (W/kg) (W/kg) Factor 29 WLAN5.2GHz 802.11a 6Mbps Left Side 5 40 5200 17.26 17.5 1.057 98.28 1.018 -0.05 0.845 0.909 WLAN5.2GHz 802.11a 6Mbps Left Side 5 36 5180 17.21 17.5 1.069 98.28 1.018 -0.03 0.814 0.886 30 WLAN 5.8GHz 802.11a 6Mbps Left Side 5 157 5785 16.89 17.50 1.151 98.28 1.018 0.06 0.658 0.771 <Bluetooth SAR> Duty Average Tune-Up Tune-up Duty Power Measured Reported Plot Test Gap Freq. Cycle Band Mode Ch. Power Limit Scaling Cycle Drift 1g SAR 1g SAR No. Position (mm) (MHz) Scaling (dBm) (dBm) Factor % (dB) (W/kg) (W/kg) Factor 31 Bluetooth 1Mbps Back 5 0 2402 16.52 16.60 1.019 77.02 1.082 0.04 0.157 0.173 Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 27 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 12.3 Body Worn Accessory SAR <GSM SAR> Average Tune-Up Tune-up Power Measured Reported Plot Test Gap Power Freq. Band Mode Ch. Power Limit Scaling Drift 1g SAR 1g SAR No. Position (mm) Mode (MHz) (dBm) (dBm) Factor (dB) (W/kg) (W/kg) 32 GSM850 GPRS 3 Tx slots Back 5 P-Sensor On 251 848.8 28.30 29.50 1.318 0.13 0.259 0.341 33 GSM1900 GPRS 4 Tx slots Back 5 P-Sensor On 810 1909.8 18.93 19.00 1.016 0.1 0.193 0.196 <WCDMA SAR> Average Tune-Up Tune-up Power Measured Reported Plot Test Gap Power Freq. Band Mode Ch. Power Limit Scaling Drift 1g SAR 1g SAR No. Position (mm) Mode (MHz) (dBm) (dBm) Factor (dB) (W/kg) (W/kg) 34 WCDMA Band V RMC 12.2Kbps Back 5 P-Sensor On 4233 846.6 20.74 21.80 1.276 -0.01 0.377 0.481 35 WCDMA Band II RMC 12.2Kbps Back 5 P-Sensor On 9538 1907.6 12.68 13.80 1.294 0.01 0.193 0.250 <CDMA2000 SAR> Average Tune-Up Tune-up Power Measured Reported Plot Test Gap Power Freq. Band Mode Ch. Power Limit Scaling Drift 1g SAR 1g SAR No. Position (mm) Mode (MHz) (dBm) (dBm) Factor (dB) (W/kg) (W/kg) 36 CDMA2000 BC0 RC3 SO32(F+SCH) Back 5 P-Sensor On 777 848.31 19.92 21.00 1.282 0.03 0.343 0.440 37 CDMA2000 BC1 RC3 SO32(F+SCH) Back 5 P-Sensor On 1175 1908.75 12.95 14.00 1.274 0.01 0.186 0.237 <LTE SAR> Average Tune-Up Tune-up Power Measured Reported Plot BW RB RB Test Gap Power Freq. Band Modulation Ch. Power Limit Scaling Drift 1g SAR 1g SAR No. (MHz) Size Offset Position (mm) Mode (MHz) (dBm) (dBm) Factor (dB) (W/kg) (W/kg) 38 LTE Band 13 10M QPSK 1 0 Back 5 P-Sensor On 23230 782 21.14 22.00 1.219 0.04 0.306 0.373 39 LTE Band 5 10M QPSK 1 25 Back 5 P-Sensor On 20525 836.5 20.76 21.80 1.271 0.04 0.389 0.494 40 LTE Band 66 20M QPSK 1 0 Back 5 P-Sensor On 132072 1720 14.47 15.30 1.211 0.01 0.363 0.439 41 LTE Band 2 20M QPSK 1 0 Back 5 P-Sensor On 19100 1900 13.08 14.00 1.236 -0.01 0.202 0.250 42 LTE Band 7 20M QPSK 50 0 Back 5 P-Sensor On 20850 2510 15.25 16.20 1.245 0.05 0.276 0.343 <WLAN 2.4GHz SAR> Duty Max Average Tune-Up Tune-up Duty Measured Reported Plot Test Gap Freq. Cycle Area Band Mode Ch. Power Limit Scaling Cycle 1g SAR 1g SAR No. Position (mm) (MHz) Scaling Scan (dBm) (dBm) Factor % (W/kg) (W/kg) Factor SAR 43 WLAN2.4GHz 802.11b 1Mbps Back 5 11 2462 16.79 17.00 1.050 100 1.000 0.01 0.165 0.173 <WLAN 5GHz SAR> Duty Average Tune-Up Tune-up Duty Power Measured Reported Plot Test Gap Freq. Cycle Band Mode Ch. Power Limit Scaling Cycle Drift 1g SAR 1g SAR No. Position (mm) (MHz) Scaling (dBm) (dBm) Factor % (dB) (W/kg) (W/kg) Factor 44 WLAN5.3GHz 802.11a 6Mbps Back 5 64 5320 17.23 17.50 1.064 98.28 1.018 0.09 0.522 0.565 45 WLAN5.5GHz 802.11a 6Mbps Back 5 100 5500 17.07 17.50 1.104 98.28 1.018 0.03 0.603 0.678 46 WLAN 5.8GHz 802.11a 6Mbps Back 5 157 5785 16.89 17.50 1.151 98.28 1.018 0.01 0.309 0.362 <Bluetooth SAR> Duty Average Tune-Up Tune-up Duty Power Measured Reported Plot Test Gap Freq. Cycle Band Mode Ch. Power Limit Scaling Cycle Drift 1g SAR 1g SAR No. Position (mm) (MHz) Scaling (dBm) (dBm) Factor % (dB) (W/kg) (W/kg) Factor 47 Bluetooth 1Mbps Back 5 0 2402 16.52 16.60 1.019 77.02 1.082 0.04 0.157 0.173 Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 28 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 12.4 Product specific 10g SAR <GSM SAR> Average Tune-Up Tune-up Power Measured Reported Plot Test Gap Power Freq. Band Mode Ch. Power Limit Scaling Drift 10g SAR 10g SAR No. Position (mm) Mode (MHz) (dBm) (dBm) Factor (dB) (W/kg) (W/kg) 48 GSM850 GPRS 3 Tx slots Back 0 Full 251 848.8 30.31 31.00 1.172 0.02 0.478 0.560 49 GSM1900 GPRS 3 Tx slots Back 0 Handheld On 512 1850.2 24.62 26.50 1.542 0.16 0.913 1.408 <WCDMA SAR> Average Tune-Up Tune-up Power Measured Reported Plot Test Gap Power Freq. Band Mode Ch. Power Limit Scaling Drift 10g SAR 10g SAR No. Position (mm) Mode (MHz) (dBm) (dBm) Factor (dB) (W/kg) (W/kg) 50 WCDMA Band V RMC 12.2Kbps Back 0 Full 4182 836.4 23.30 24.00 1.175 0.05 1.070 1.257 51 WCDMA Band II RMC 12.2Kbps Back 0 Handheld On 9262 1852.4 18.96 20.30 1.361 -0.07 1.320 1.797 <CDMA2000 SAR> Average Tune-Up Tune-up Power Measured Reported Plot Test Gap Power Freq. Band Mode Ch. Power Limit Scaling Drift 10g SAR 10g SAR No. Position (mm) Mode (MHz) (dBm) (dBm) Factor (dB) (W/kg) (W/kg) 52 CDMA2000 BC0 RTAP 153.6Kbps Back 0 Full 777 848.31 24.11 25.00 1.227 -0.07 1.280 1.571 53 CDMA2000 BC1 RTAP 153.6Kbps Back 0 Handheld On 1175 1908.75 18.36 19.50 1.300 0.06 1.040 1.352 <LTE SAR> Average Tune-Up Tune-up Power Measured Reported Plot BW RB RB Test Gap Power Freq. Band Modulation Ch. Power Limit Scaling Drift 10g SAR 10g SAR No. (MHz) Size Offset Position (mm) Mode (MHz) (dBm) (dBm) Factor (dB) (W/kg) (W/kg) 54 LTE Band 13 10M QPSK 1 0 Back 0 Full 23230 782 23.00 24.00 1.259 0.06 0.988 1.244 55 LTE Band 5 10M QPSK 1 25 Back 0 Full 20525 836.5 23.00 24.00 1.259 0.1 0.878 1.105 56 LTE Band 66 20M QPSK 50 0 Back 0 Handheld On 132072 1720 18.16 19.30 1.300 -0.04 1.250 1.625 57 LTE Band 2 20M QPSK 50 0 Back 0 Handheld On 18700 1860 19.30 20.60 1.349 -0.05 1.350 1.821 58 LTE Band 7 20M QPSK 50 0 Back 0 Handheld On 21350 2560 19.80 20.70 1.230 -0.07 1.160 1.427 <WLAN 5GHz SAR> Duty Average Tune-Up Tune-up Duty Power Measured Reported Plot Test Gap Power Freq. Cycle Band Mode Ch. Power Limit Scaling Cycle Drift 10g SAR 10g SAR No. Position (mm) Mode (MHz) Scaling (dBm) (dBm) Factor % (dB) (W/kg) (W/kg) Factor 59 WLAN5.3GHz 802.11a 6Mbps Left Side 0 Full 60 5300 17.27 17.50 1.054 98.28 1.018 -0.03 1.010 1.084 60 WLAN 5.5GHz 802.11a 6Mbps Left Side 0 Full 116 5580 17.18 17.50 1.076 98.28 1.018 -0.06 1.060 1.162 Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 29 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 12.5 Repeated SAR Measurement Duty Average Tune-Up Tune-up Duty Power Measured Reported BW RB RB Test Gap Power Freq. Cycle No. Band Mode Modulation Ch. Power Limit Scaling Cycle Drift 1g SAR Ratio 1g SAR (MHz) Size Offset Position (mm) Mode (MHz) Scaling (dBm) (dBm) Factor % (dB) (W/kg) (W/kg) Factor 802.11a 1st WLAN5.3GHz - - - - Right Cheek 0 Full 60 5300 17.27 17.50 1.054 98.28 1.018 0.03 0.936 1 1.005 6Mbps 802.11a 2nd WLAN5.3GHz - - - - Right Cheek 0 Full 60 5300 17.27 17.50 1.054 98.28 1.018 0.08 0.928 1.009 0.996 6Mbps 802.11a 1st WLAN5.5GHz - - - - Right Cheek 0 Full 100 5500 17.07 17.50 1.104 98.28 1.018 0.06 0.980 1 1.101 6Mbps 802.11a 2nd WLAN5.5GHz - - - - Right Cheek 0 Full 100 5500 17.07 17.50 1.104 98.28 1.018 -0.05 0.960 1.021 1.079 6Mbps 1st LTE Band 66 - 20M QPSK 50 0 Bottom Side 5 Hotspot On 132572 1770 14.48 15.30 1.208 - - 0.03 0.952 1 1.150 2nd LTE Band 66 - 20M QPSK 50 0 Bottom Side 5 Hotspot On 132572 1770 14.48 15.30 1.208 - - -0.15 0.943 1.010 1.139 802.11a 1st WLAN5.2GHz - - - - Left Side 5 Full 40 5200 17.26 17.50 1.057 98.28 1.018 -0.05 0.845 1 0.909 6Mbps 802.11a 2nd WLAN5.2GHz - - - - Left Side 5 Full 40 5200 17.26 17.50 1.057 98.28 1.018 0.08 0.841 1.005 0.905 6Mbps General Note: 1. Per KDB 865664 D01v01r04, for each frequency band, repeated SAR measurement is required only when the measured SAR is ≥0.8W/kg. 2. Per KDB 865664 D01v01r04, if the ratio among the repeated measurement is ≤ 1.2 and the measured SAR <1.45W/kg, only one repeated measurement is required. 3. The ratio is the difference in percentage between original and repeated measured SAR. 4. All measurement SAR result is scaled-up to account for tune-up tolerance and is compliant. Test Engineer： Nick Hu Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 30 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 13. Uncertainty Assessment Per KDB 865664 D01 SAR measurement 100MHz to 6GHz, when the highest measured 1-g SAR within a frequency band is < 1.5 W/kg and the measured 10-g SAR within a frequency band is < 3.75 W/kg. The expanded SAR measurement uncertainty must be ≤ 30%, for a confidence interval of k = 2. If these conditions are met, extensive SAR measurement uncertainty analysis described in IEEE Std 1528-2013 is not required in SAR reports submitted for equipment approval. For this device, the highest measured 1-g SAR is less 1.5W/kg and highest measured 10-g SAR is less 3.75W/kg. Therefore, the measurement uncertainty table is not required in this report. Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 31 of 32 Form version. : 170509

FCC SAR Test Report Report No. : FA861509 14. References [1] FCC 47 CFR Part 2 “Frequency Allocations and Radio Treaty Matters; General Rules and Regulations” [2] ANSI/IEEE Std. C95.1-1992, “IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz”, September 1992 [3] IEEE Std. 1528-2013, “IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques”, Sep 2013 [4] SPEAG DASY System Handbook [5] FCC KDB 865664 D01 v01r04, "SAR Measurement Requirements for 100 MHz to 6 GHz", Aug 2015. [6] FCC KDB 865664 D02 v01r02, “RF Exposure Compliance Reporting and Documentation Considerations” Oct 2015. [7] FCC KDB 447498 D01 v06, “Mobile and Portable Device RF Exposure Procedures and Equipment Authorization Policies”, Oct 2015 [8] FCC KDB 648474 D03 v01r04, “Evaluation and Approval Considerations for Handsets with Specific Wireless Charging Battery Covers” Dec 2015. [9] FCC KDB 648474 D04 v01r03, “SAR Evaluation Considerations for Wireless Handsets”, Oct 2015. [10] FCC KDB 248227 D01 v02r02, “SAR Guidance for IEEE 802.11 (WiFi) Transmitters”, Oct 2015. [11] FCC KDB 941225 D01 v03r01, “3G SAR MEAUREMENT PROCEDURES”, Oct 2015 [12] FCC KDB 941225 D05 v02r05, “SAR Evaluation Considerations for LTE Devices”, Dec 2015 [13] FCC KDB 941225 D05A v01r02, “Rel. 10 LTE SAR Test Guidance and KDB Inquiries”, Oct 2015 [14] FCC KDB 941225 D06 v02r01, "SAR Evaluation Procedures for Portable Devices with Wireless Router Capabilities", Oct 2015. [15] FCC KDB 616217 D04 v01r02, “SAR Evaluation Considerations for Laptop, Notebook, Netbook and Tablet Computers”, Oct 2015. Sporton International (Kunshan) Inc. TEL : +86-512-57900158 / FAX : +86-512-57900958 Issued Date : Jun. 28, 2018 FCC ID : IHDT56XJ1 Page 32 of 32 Form version. : 170509


Document Created: 2019-09-21 19:11:10
Document Modified: 2019-09-21 19:11:10
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC