User Manual

FCC ID: IAJ210N

Users Manual

Download: PDF
FCCID_2655294

MS—210.EX IB_front Printing color: Black May 7, 2015 Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the IC/FCC Limited One—Year Warranty equipment authorization for this radio could violate Model MS—210 IC/FCC rules. eKids, LLC warrants this product to be free from defects in LL] MINION MAD EYE—CONIC workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Portable Radio Operation and RF Exposure Should this product fail to function in a satisfactory manner, it Antenna Care is best to first return it to the store where it was originally Use only the supplied or an approved replacement FRS 2—WAY RADIOS purchased. Should this fail to resolve the matter and service antenna. still be required by reason of any defect or malfunction during Unauthorized antennas, modifications, or attachments the warranty period, eKids will repair or, at its discretion, replace this product without charge. This decision is subject to =q s could damage the radio and may violate FCC/IC verification of the defect or malfunction upon delivery of this regulations. product to the Factory Service Center authorized by Customer Service. If service is required, please call Customer Service at 1—888—TOP—TOYS to obtain a Return Authorization Number and shipping instructions. Disclaimer of Warranty NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD‘s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will eKids or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier‘s check, or credit card) for purchase of your eKids product. © 2015 eKids, LLC Questions? Visit www.ekids.com or call 1—888—TOP—TOYS 1299 Main Street Rahway NJ 07065 Despicable Me, Minion Made and all related marks and characters are trademarks and copyrights of Universal Studios. Licensed by Universal Studios Licensing LLC. All Rights Reserved. Important Message to Consumers Thank you for purchasing one of Universal Studios‘s top—quality electronic products. Please take a moment to read through these instructions to help you understand the safe and proper way to use this toy to extend its usability. Keep these instructions for future reference as they contain important information. Printed in China MS—210—050715—A

MS—210.EX IB_back Printing color: Black May 7, 2015 Getting Started Listening Troubleshooting A Installing the Batteries UNSCREW TO OPEN DOOR « Both 2—Way Radios must be turned on and have If one or both of the 2—Way Radios do not work, this their antennas pointing upwards in order to send may indicate that the batteries are weak. Insert 4 new Note: Batteries should always be installed by an adult. and receive messages (speak and listen). AAA (RO3) batteries into each unit. If the signal range ©@ Use a Phillips screwadriver to open the battery « Messages cannot be received while the Talk of the 2—Way Radios decreases notably, this may again compartment door located on the back of the unit. Button is being pressed. Release the Talk Button be an indication that the batteries are weak. Insert 4 © Insert 4 AAA (RO3) batteries into each 2—Way to listen. new AAA (RO3) batteries into each unit. Radio with + and — terminals as indicated in the «— Messages can be heard through the Speaker. Please keep in mind that this product does not transmit compartment. well through obstacles such as trees, buildings, and © Replace the compartment door and tighten the screw with a Phillips screwdriver. Do not Playing 2—Way Radio Games metal structures. If there is a sizable increase in static, it may be due to over—tighten the screw. 2—Way Radios can be used for all kinds of fun games the proximity of electric motors, fluorescent lights, power For the Best Possible Performance and activities. Here are two suggestions: lines, or other signal—disrupting objects. You may have * We recommend the use of alkaline batteries for longer life. to change your location. «_ Do not mix old and new batteries. Hide and Seek If problems persist, DO NOT ATTEMPT TO REPAIR « Do not mix alkaline, standard (carbon—zinc) or Just like regular Hide and Seek, but with a twist: the THE UNIT. See the Warranty for factory services. rechargeable (nickel—cadmium) batteries. "Hider" can send clues to the "Seeker" using the 2—Way Batteries are to be inserted with correct polarity. Radios. Remove exhausted batteries from the unit. Mystery Sounds FCC Information Do not attempt to recharge non—rechargeable batteries. Can you recognize the mystery sound? One kid sends This device complies with Part 15 of the FCC rules. Remove the rechargeable batteries from the unit a sound over the 2—Way Radios, while another tries to Operation is subject to the following two conditions: (1) this before charging. guess what the sound is. Examples can include an device may not cause harmful interference, and (2) this The supply terminals are not to be short—circuited. animal, song, TV show, or anything else! device must accept any interference received, including Batteries should be removed if the item will not be interference that may cause undesired operation. used for an extended period of time, such as a month or longer, to prevent battery leakage or damage. Maintenance NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant Rechargeable batteries should only be charged under It is important to keep the 2—Way Radios as dry and to Part 15 of the FCC rules. These limits are designed to adult supervision. Power LED clean as possible. You may clean the cabinet with a provide reasonable protection against harmful interference Only batteries of the same or equivalent type as in a residential installation. This equipment generates, uses, cloth or sponge moistened with mild soap and water. recommended are to be used. and can radiate radio frequency energy and, if not installed Do not attempt to use strong cleansers or solvents, as and used in accordance with the instructions, may cause they may cause damage. Turning Power On/Off harmful interference to radio communications. However, there is no guarantee that interference will not occur in a «_ Turn the Power/Volume Knob until the Power LED Questions or Comments particular installation. If this equipment does cause harmful interference to radio or television reception, which can be lights up to indicate the unit is ON. determined by turning the equipment off and on, the user Both 2—Way Radios must be turned on in order to «— For questions or comments regarding this or other eKids products, please call our toll—free number: is encouraged to try to correct the interference by one or send and receive messages. more of the following measures: Speaker 1—888—TOP—TOYS Turn the Power/Volume Knob until it ‘clicks‘ to turn *« Reorient or relocate the receiving antenna. OFF the unit. The Power LED light will disappear. Also visit our website: www.ekids.com *« Increase the separation between the equipment and If problems persist, please do not attempt to repair receiver. unit; see warranty for factory service. « Connect the equipment into an outlet on a circuit different Speaking from that to which the receiver is connected. « Consult the dealer or an experienced radio/TV technician for help. Press and hold the Talk Button while speaking into WARNING: Changes or modifications to this unit not the Microphone. Release the Talk Button to listen. expressly approved by the party responsible for compliance Adjust volume using the Power/Volume Knob. could void the user‘s authority to operate the equipment. You Should Know Front Microphone CAN ICES—3 (BJYNMB—3(B) For clear transmission, keep the antenna pointing View upwards and the microphone approximately two inches from your mouth.

FRS FREQUENCY CHART (MHz) CH. No. CH. Freq. CH. No. CH. Freq. CH. No. CH. Freq. 1 462.5625 4 462.6375 7 462.7125 2 462.5875 5 462.6625 --- --- 3 462.6125 6 462.6875 --- --- FCC Warning To ensure that your expose to RF electromagnetic energy is Within the FCC allowable limits for occupational use, alwaysAdhere to the following guidelines: z DO NOT operate the radio without a proper antenna attached, as this may damaged the radio And may also cause you to exceed FCC RF exposure limits, A proper antenna is the antenna Supplied with this radio by the manufacturer or antenna specifically authorized by the manufacturer for use with this radio. z DO NOT transmits for more than 50% of total radio use time (“50% duty cycle). Transmitting more than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded. The radio is transmitting when the “TX indicator” lights red. You can cause the radio to transmit by pressing the “PTT” switch. z ALWAYS kepp the antenna at least 2.5cm (1 inch) away from the body when transmitting and Only use the belt-clip which is listed in instructions when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance requirements are not exceeded. The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to as-sure that this radio operates with the FCC RF exposure limits of this radio.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE 1: This equipment has been tested and found to comply with the part 95 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.


Document Created: 2015-06-15 16:40:43
Document Modified: 2015-06-15 16:40:43
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC