Users Manual

FCC ID: IAJ210

Users Manual

Download: PDF
FCCID_1443999

CR-210 IB_front Printing color: Black Jan. 20, 11. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the IC/FCC Limited One-Year Warranty equipment authorization for this radio could violate IC/FCC rules. KIDdesigns warrants this product to be free from defects in Model CR-210 workmanship and materials, under normal use and conditions, This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject for a period of one year from the date of original -purchase. Should service be required by reason of any defect or malfunction, it is best to first return this product and all parts Pit Stop to the following two conditions: (1) this device may not thereof to the store where it was originally purchased. If you need to send the product for service during the warranty period, Walkie Talkies cause interference, and (2) this device must accept any KIDdesigns will repair or, at its discretion, replace this product interference, including interference that may cause without charge (except for a $6.00 charge for handling, packing, undesired operation of the device. return UPS/postage and insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed below. The product Le présent appareil est conforme aux CNR d'Industrie must include proof of purchase, including date of purchase. Canada applicables aux appareils radio exempts de Before returning this product for service, please first replace licence. L'exploitation est autorisée aux deux conditions the batteries (if applicable) with fresh ones, as exhausted or defective batteries are the most common cause of problems suivantes : (1) l'appareil ne doit pas produire de encountered. brouillage, et (2) l'utilisateur de l'appareil doit accepter If service is still required: tout brouillage radioélectrique subi, même si le brouillage 1. Remove batteries (if applicable) and pack unit in a est susceptible d'en compromettre le fonctionnement. well-padded, heavy corrugated box. 2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase. Portable Radio Operation and RF Exposure 3. Enclose a check or money order payable to the order of Antenna Care KIDdesigns, for the sum of $6.00. Use only the supplied or an approved replacement 4. Send the unit prepaid to the Factory Service Center listed below. antenna. NOTE: This warranty is valid only if the product is used for the Unauthorized antennas, modifications, or attachments purpose for which it was designed. It does not cover (i) products could damage the radio and may violate FCC/IC which have been damaged by negligence, misuse or accident, regulations. or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product subsequent to the original purchaser. Any applicable implied warranties are also limited to one year, and KIDdesigns will not be liable for consequential damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Send unit to: Consumer Repair Department KIDdesigns, Inc. 1330 Goodyear Dr. El Paso, TX 79936-6420 © Disney/Pixar Visit disney.com/cars Distributed by KIDdesigns, Inc. Rahway, NJ 07065-5024 eKids is a wholly owned subsidiary of KidDesigns, Inc, Important Message to Customers 1299 Main Street Rahway NJ 07065 Thank you for purchasing one of Disney/Pixar’s many top-quality electronic products. We would appreciate it if you take a few moments to read through these instructions. This will help you explain to the child the safe and proper way to use Printed in China CR210-121410-A this toy, and to help give it the long-lasting life that Disney/Pixar products are designed for.

CR-210 IB_back Printing color: Black Jan. 14, 11. Getting Started  Listening Troubleshooting Installing the Batteries  • Both Walkie Talkies must be turned on and have If one or both of the Walkie Talkies do not work, this their antennas pointing upwards in order to send may indicate that the batteries are weak. Insert 4 new Note: Batteries should always be installed by an adult. and receive messages (speak and listen). AAA (R03) batteries into each unit. If the signal range  Use a Phillips screwdriver to open the battery • Messages cannot be received while the Talk of the Walkie Talkies decreases notably, this may again compartment door located on the back of the unit. Button is being pressed. Release the Talk Button be an indication that the batteries are weak. Insert 4  Insert 4 AAA (R03) batteries into each Walkie to listen. new AAA (R03) batteries into each unit. Talkie with + and - terminals as indicated in the • Messages can be heard through the Speaker. Please keep in mind that this product does not transmit compartment. well through obstacles such as trees, buildings, and  Replace the compartment door and tighten the screw with a Phillips screwdriver. Do not Playing Walkie Talkie Games metal structures. If there is a sizable increase in static, it may be due to over-tighten the screw.  Walkie Talkies can be used for all kinds of fun games the proximity of electric motors, fluorescent lights, power For the Best Possible Performance and activities. Here are two suggestions: lines, or other signal-disrupting objects. You may have • We recommend the use of alkaline batteries for longer life. to change your location. • Do not mix old and new batteries. Hide and Seek If problems persist, DO NOT ATTEMPT TO REPAIR • Do not mix alkaline, standard (carbon-zinc) or Just like regular Hide and Seek, but with a twist: the THE UNIT. See the Warranty for factory services. rechargeable (nickel-cadmium) batteries. Power/Volume Knob “Hider” can send clues to the “Seeker” using the Walkie • Batteries are to be inserted with correct polarity. Talkies. • Remove exhausted batteries from the unit. • Do not attempt to recharge non-rechargeable Mystery Sounds FCC Information batteries. Speaker Can you recognize the mystery sound? One kid sends This device complies with Part 15 of the FCC rules. • Remove the rechargeable batteries from the unit a sound over the Walkie Talkies, while another tries to Operation is subject to the following two conditions: (1) this before charging. guess what the sound is. Examples can include an device may not cause harmful interference, and (2) this Power LED animal, song, TV show, or anything else! • The supply terminals are not to be short-circuited. device must accept any interference received, including • Batteries should be removed if the item will not be interference that may cause undesired operation. used for an extended period of time, such as a month or longer, to prevent battery leakage or damage. Talk Button Maintenance NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant • Rechargeable batteries should only be charged under It is important to keep the Walkie Talkies as dry and to Part 15 of the FCC rules. These limits are designed to adult supervision. clean as possible. You may clean the cabinet with a provide reasonable protection against harmful interference • Only batteries of the same or equivalent type as cloth or sponge moistened with mild soap and water. in a residential installation. This equipment generates, uses, recommended are to be used and can radiate radio frequency energy and, if not installed Do not attempt to use strong cleansers or solvents, as and used in accordance with the instructions, may cause they may cause damage. Turning Power On/Off harmful interference to radio communications. However, there is no guarantee that interference will not occur in a • Turn Power/Volume Knob right (clockwise) to turn Questions or Comments particular installation. If this equipment does cause harmful interference to radio or television reception, which can be on the Walkie Talkies. The Power LED will light to determined by turning the equipment off and on, the user indicate unit is ON. • For questions or comments regarding this or other KIDdesigns products, please call our toll-free is encouraged to try to correct the interference by one or • Both Walkie Talkies must be turned on in order to more of the following measures: send and receive messages. number: 1-888-TOP-TOYS • Reorient or relocate the receiving antenna. • Turn Power/Volume Knob left (counter-clockwise) Also visit our website: www.kiddesigns.com • Increase the separation between the equipment and to shut off the Walkie Talkies. If problems persist, please do not attempt to repair receiver. unit; see warranty for factory service. • Connect the equipment into an outlet on a circuit different Speaking from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Press and hold the Talk Button while speaking into WARNING: Changes or modifications to this unit not the Microphone. Release Talk Button to listen. Adjust expressly approved by the party responsible for compliance volume using Power/Volume Knob. could void the user's authority to operate the equipment. You Should Know This Class B digital apparatus complies with Canadian For clear transmission, keep the antenna pointing Microphone ICES-003. upwards and the microphone approximately two Cet appareil numérique de la classe B est conforme à la inches from your mouth. norme NMB-003 du Canada.

PF-210 IB_front Printing color: Black Mar. 22, 11. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the IC/FCC Limited One-Year Warranty equipment authorization for this radio could violate IC/FCC rules. KIDdesigns warrants this product to be free from defects in Model PF-210 workmanship and materials, under normal use and conditions, for a period of one year from the date of original -purchase. This device complies with Industry Canada Should service be required by reason of any defect or malfunction, it is best to first return this product and all parts Perry-diculously Cool licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not thereof to the store where it was originally purchased. If you need to send the product for service during the warranty period, Walkie Talkies cause interference, and (2) this device must accept any KIDdesigns will repair or, at its discretion, replace this product interference, including interference that may cause without charge (except for a $6.00 charge for handling, packing, undesired operation of the device. return UPS/postage and insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed below. The product Le présent appareil est conforme aux CNR d'Industrie must include proof of purchase, including date of purchase. Canada applicables aux appareils radio exempts de Before returning this product for service, please first replace licence. L'exploitation est autorisée aux deux conditions the batteries (if applicable) with fresh ones, as exhausted or defective batteries are the most common cause of problems suivantes : (1) l'appareil ne doit pas produire de encountered. brouillage, et (2) l'utilisateur de l'appareil doit accepter If service is still required: tout brouillage radioélectrique subi, même si le brouillage 1. Remove batteries (if applicable) and pack unit in a est susceptible d'en compromettre le fonctionnement. well-padded, heavy corrugated box. 2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase. Portable Radio Operation and RF Exposure 3. Enclose a check or money order payable to the order of Antenna Care KIDdesigns, for the sum of $6.00. Use only the supplied or an approved replacement 4. Send the unit prepaid to the Factory Service Center listed below. antenna. NOTE: This warranty is valid only if the product is used for the Unauthorized antennas, modifications, or attachments purpose for which it was designed. It does not cover (i) products could damage the radio and may violate FCC/IC which have been damaged by negligence, misuse or accident, regulations. or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product subsequent to the original purchaser. Any applicable implied warranties are also limited to one year, and KIDdesigns will not be liable for consequential damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Send unit to: Consumer Repair Department KIDdesigns, Inc. 1330 Goodyear Dr. El Paso, TX 79936-6420 © Disney Visit the Disney website at DisneyXD.com Distributed by KIDdesigns, Inc. Rahway, NJ 07065-5024 eKids is a wholly owned subsidiary of KidDesigns, Inc, Important Message to Customers 1299 Main Street Rahway NJ 07065 Thank you for purchasing one of Disney/Pixar’s many top-quality electronic products. We would appreciate it if you take a few moments to read through these instructions. This will help you explain to the child the safe and proper way to use Printed in China PF210-032211-A this toy, and to help give it the long-lasting life that Disney/Pixar products are designed for.

PF-210 IB_back Printing color: Black Mar. 22, 11. Getting Started Listening Troubleshooting Installing the Batteries • Both Walkie Talkies must be turned on and have If one or both of the Walkie Talkies do not work, this their antennas pointing upwards in order to send may indicate that the batteries are weak. Insert 4 new Note: Batteries should always be installed by an adult. and receive messages (speak and listen). AAA (R03) batteries into each unit. If the signal range DC 1.5V (R03) DC 1.5V (R03) DC 1.5V (R03) DC 1.5V (R03) UM-4, AAA SIZE UM-4, AAA SIZE UM-4, AAA SIZE UM-4, AAA SIZE  Use a Phillips screwdriver to open the battery • Messages cannot be received while the Talk of the Walkie Talkies decreases notably, this may again compartment door located on the back of the unit.  Button is being pressed. Release the Talk Button be an indication that the batteries are weak. Insert 4  Insert 4 AAA (R03) batteries into each Walkie to listen. new AAA (R03) batteries into each unit. Talkie with + and - terminals as indicated in the • Messages can be heard through the Speaker. Please keep in mind that this product does not transmit compartment. well through obstacles such as trees, buildings, and  Replace the compartment door and tighten the screw with a Phillips screwdriver. Do not Playing Walkie Talkie Games metal structures. If there is a sizable increase in static, it may be due to over-tighten the screw. Walkie Talkies can be used for all kinds of fun games the proximity of electric motors, fluorescent lights, power For the Best Possible Performance  lines, or other signal-disrupting objects. You may have  and activities. Here are two suggestions: • We recommend the use of alkaline batteries for longer life. to change your location. • Do not mix old and new batteries. Hide and Seek If problems persist, DO NOT ATTEMPT TO REPAIR • Do not mix alkaline, standard (carbon-zinc) or Just like regular Hide and Seek, but with a twist: the THE UNIT. See the Warranty for factory services. rechargeable (nickel-cadmium) batteries. “Hider” can send clues to the “Seeker” using the Walkie • Batteries are to be inserted with correct polarity. Talkies. Power/Volume Knob • Remove exhausted batteries from the unit. • Do not attempt to recharge non-rechargeable Mystery Sounds FCC Information batteries. Can you recognize the mystery sound? One kid sends This device complies with Part 15 of the FCC rules. Power LED a sound over the Walkie Talkies, while another tries to • Remove the rechargeable batteries from the unit Operation is subject to the following two conditions: (1) this before charging. guess what the sound is. Examples can include an device may not cause harmful interference, and (2) this • The supply terminals are not to be short-circuited. animal, song, TV show, or anything else! device must accept any interference received, including • Batteries should be removed if the item will not be Talk Button interference that may cause undesired operation. used for an extended period of time, such as a month or longer, to prevent battery leakage or damage. Speaker Maintenance NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant • Rechargeable batteries should only be charged under It is important to keep the Walkie Talkies as dry and to Part 15 of the FCC rules. These limits are designed to adult supervision. clean as possible. You may clean the cabinet with a provide reasonable protection against harmful interference • Only batteries of the same or equivalent type as cloth or sponge moistened with mild soap and water. in a residential installation. This equipment generates, uses, recommended are to be used and can radiate radio frequency energy and, if not installed Do not attempt to use strong cleansers or solvents, as and used in accordance with the instructions, may cause they may cause damage. Turning Power On/Off harmful interference to radio communications. However, there is no guarantee that interference will not occur in a • Turn Power/Volume Knob right (clockwise) to turn Questions or Comments particular installation. If this equipment does cause harmful interference to radio or television reception, which can be on the Walkie Talkies. The Power LED will light to determined by turning the equipment off and on, the user indicate unit is ON. • For questions or comments regarding this or other KIDdesigns products, please call our toll-free is encouraged to try to correct the interference by one or • Both Walkie Talkies must be turned on in order to more of the following measures: send and receive messages. number: 1-888-TOP-TOYS • Reorient or relocate the receiving antenna. • Turn Power/Volume Knob left (counter-clockwise) Also visit our website: www.kiddesigns.com • Increase the separation between the equipment and to shut off the Walkie Talkies. If problems persist, please do not attempt to repair receiver. unit; see warranty for factory service. • Connect the equipment into an outlet on a circuit different Speaking from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Press and hold the Talk Button while speaking into WARNING: Changes or modifications to this unit not the Microphone. Release Talk Button to listen. Adjust expressly approved by the party responsible for compliance volume using Power/Volume Knob. could void the user's authority to operate the equipment. You Should Know Microphone This Class B digital apparatus complies with Canadian For clear transmission, keep the antenna pointing ICES-003. upwards and the microphone approximately two Cet appareil numérique de la classe B est conforme à la inches from your mouth. norme NMB-003 du Canada.


Document Created: 2011-03-25 17:17:33
Document Modified: 2011-03-25 17:17:33
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC