Test report-Co-located

FCC ID: I88WAC6103D-I

Test Report

Download: PDF
FCCID_2728920

FCC Co-Location Test Report FCC ID : I88WAC6103D-I Equipment : 802.11 ac Unified Pro Access Point Model No. : WAC6103D-I Brand Name : ZyXEL Applicant : ZyXEL Communications Corporation Address : No. 2, Gongye E. 9th Road, Hsinchu Science Park, Hsinchu, Taiwan. Standard : 47 CFR FCC Part 15.247 47 CFR FCC Part 15.407 Received Date : Jun. 30, 2015 Tested Date : Jul. 22 ~ Aug. 10, 2015 We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Approved & Reviewed by: Gary Chang / Manager Ty: XXX Report No.: FR563002CO Page : 1 of 18 Report Version: Rev. 03

Table of Contents 1 GENERAL DESCRIPTION ............................................................................................................... 5 1.1 Information........................................................................................................................................ 5 1.2 The Equipment List ........................................................................................................................... 6 1.3 Test Standards ................................................................................................................................. 6 1.4 Measurement Uncertainty ................................................................................................................. 6 2 TEST CONFIGURATION .................................................................................................................. 7 2.1 Testing Condition .............................................................................................................................. 7 2.2 The Worst Test Modes and Channel Details ...................................................................................... 7 3 TRANSMITTER TEST RESULTS ..................................................................................................... 8 3.1 Unwanted Emissions into Restricted Frequency Bands ..................................................................... 8 4 TEST LABORATORY INFORMATION ........................................................................................... 18 Report No.: FR563002CO Page : 2 of 18 Report Version: Rev. 03

Release Record Report No. Version Description Issued Date FR563002CO Rev. 01 Initial issue Aug. 21, 2015 FR563002CO Rev. 02 Modified product name Aug. 25, 2015 FR563002CO Rev. 03 Modified 2.4G frequency range Aug. 28, 2015 Report No.: FR563002CO Page : 3 of 18 Report Version: Rev. 03

Summary of Test Results FCC Rules Test Items Measured Result 15.247(d) [dBuV/m at 3m]: 900.09MHz 15.407(b) Radiated Emissions Pass 42.82 (Margin -3.18dB) – QP 15.209 Report No.: FR563002CO Page : 4 of 18 Report Version: Rev. 03

1 General Description 1.1 Information 1.1.1 Specification of the Equipment under Test (EUT) 802.11b/g/n: 2412 MHz ~ 2462 MHz Operating Frequency 802.11a/n/ac: 5180 MHz ~ 5240 MHz; 5745 MHz ~ 5825 MHz 802.11b: DSSS (DBPSK / DQPSK / CCK) Modulaton Type 802.11a/g/n/ac: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM) 1.1.2 Antenna Details Frequencies (MHz) / Antenna Gain (dBi) Brand / Ant. Type Connector Remark Model No. 2400~2483.5 5150~5250 5725~5850 1 PIFA UFL 3.28 --- --- Ceiling mounted: Antenna 1 / 2 / 3 2 PIFA UFL 3.37 --- --- 3 PIFA UFL 3.15 --- --- Wall mounted: SINBON / Antenna 1 / 2 / 4 2.4G & 5G 4 Dipole UFL 4.33 --- --- Metal & PCB 5 LOOP UFL --- 4.38 4.23 Ceiling mounted: Antenna Antenna 5 / 6 / 7 6 LOOP UFL --- 4.31 4.22 7 LOOP UFL --- 4.38 4.36 Wall mounted: Antenna 5 / 6 / 8 8 Dipole UFL --- 5.12 5.20 Note: 1. The device has a hardware control switch to change operating mode as Ceiling or Wall mounted mode. The difference between both operating modes is only transmission antennas combination. 2. The antenna set includes 8 antennas as above table. 1.1.3 Accessories N/A Report No.: FR563002CO Page : 5 of 18 Report Version: Rev. 03

Infernational Certification Corp. 1.2 The Equipment List Test Item Radiated Emission Test Site 966 chamber1 / (OBCHO1—WS) Instrument Manufacturer Model No. Serial No. Calibration Date Calibration Until Spectrum Analyzer R&AS ESV40 101498 Dec. 09, 2014 Dec. 08, 2015 Receiver R&AS ESA3 101658 Nov. 10, 2014 Nov. 09, 2015 Bilog Antenna. SCHWARZBECK VULB3168 VULB3168—522 Sep. 05, 2014 Sep. 04, 2015 HUTG/_*;‘;z‘”a SCHWARZBECK BBHA 9120 D BBHA 9120 D 1096 Dec. 11, 2014 Dec. 10, 2015 H‘;’gé’fgg"a SCHWARZBECK BBHA 9170 BBHA 9170517 Nov. 10, 2014 Nov. 09, 2015 Loop Antenna R&AS HEH2—22 11900 Nov. 10, 2014 Nov. 09, 2015 Preamplifier Burgeon BPA—530 SN:100219 Sep. 09, 2014 Sep. 08, 2015 Preamplifier Agilent 83017A MY39501308 Oct. 09, 2014 Oct. 08, 2015 Preamplifier EMC EMC184045B 980192 Aug. 26, 2014 Aug. 25, 2015 RF Cable HUBER+SUHNER SUCOFLEX104 MY16014/4 Dec. 15, 2014 Dec. 14, 2015 RF Cable HUBER+SUHNER SUCOFLEX104 MY160194 Dec. 15, 2014 Dec. 14, 2015 RF Cable HUBER+SUHNER SUCOFLEX104 MY161394 Dec. 15, 2014 Dec. 14, 2015 LF cable 3M Woken CFD400NL—LW CFD400NL—001 Dec. 15, 2014 Dec. 14, 2015 LF cable 10M Woken CFD400NL—LW CFD400NL—002 Dec. 15, 2014 Dec. 14, 2015 Measurement Software AUDIX e3 6.1202109 NA NA Note: Calibration Interval of instruments listed above is one year. 1.3 Test Standards According to the specification of EUT, the EUT must comply with following standards and KDB documents. 47 CFR FCC Part 15.247 47 CFR FCC Part 15.407 ANSI C63.10—2013 FCC KDB 558074 D01 DTS Meas Guidance v03r03 FCC 789033 DO2 General UNII Test Procedures New Rules vO1 FCC KDB 644545 D03 Guidance for IEEE 802 11ac New Rules vO1 FCC KDB 662911 D01 Multiple Transmitter Output v02r01 FCC KDB 412172 DQ1 Determining ERP and EIRP vO1r01 1.4 Measurement Uncertainty ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2) Measurement Uncertainty Parameters Uncertainty Radiated emission < 1GHz +3.72 dB Radiated emission > 1GHz +5.65 cdB Report No.: FR563002CO Page : 6 of 18 Report Version: Rev. 03

C Infernational Certification Corp. 2 Test Configuration 2.1 Testing Condition Test Item Test Site Ambient Condition Tested By . h o care Anderson Hong Radiated Emissions O3CHO1—WS 21—25°C / 61—66% Morgan Chen > FCC site registration No.: 657002 > IC site registration No.: 108071 2.2 The Worst Test Modes and Channel Details Data rate (Mbps) Test Test item Modulation Mode Test Channel /MCS Configuration Radiated Emissions 2.4G 11b + 5G Hac VHT20 CH6 + CH157 6 Mbps + MCS 0 1, 2 NOTE: 1. The EUT was pretested with 3 orientations placed on the table for the radiated emission measurement —X, Y, and Z—plane. The Y—plane and Z—plane results were found as the worst case and were shown in this report as below test configuration. 2. The device was designed to be ceiling mounted or wall mounted with different group of antenna, and was selected to perform radiated emission test as below test configuration. 3. Test Configurations are listed as below: 1) Configuration 1: Ceiling mounted, Z—plane. 2) Configuration 2: Wall mounted, Y—plane Report No.: FR563002CO Page : 7 of 18 Report Version: Rev. 03

C Infernational Certification Corp. 3 Transmitter Test Results 3.1 Unwanted Emissions into Restricted Frequency Bands 3.1.1 Limit of Unwanted Emissions into Restricted Frequency Bands Restricted Band Emissions Limit Frequency Range (MHz)| Field Strength (uV/m) |Field Strength (dBuV/m)| Measure Distance (m) 0.009~0.490 2400/F (KHz) 48.5 — 13.8 300 0.490~1.705 24000/F (KHz) 33.8 — 23 30 1.705~30.0 30 29 30 30~88 100 40 3 88~216 150 43.5 3 216~960 200 46 3 Above 960 500 54 3 Note 1: Qusai—Peak value is measured for frequency below 1GHz except for 9—90 kHz, 110—490 kHz frequency band. Peak and average value are measured for frequency above 1GHz. The limit on average radio frequency emission is as above table. The limit on peak radio frequency emissions is 20 dB above the maximum permitted average emission limit Note 2: Measurements may be performed at a distance other than whatis specified provided. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor as below, Frequency at or above 30 MHz: 20 dB/decade Frequency below 30 MHz: 40 dB/decade. 3.1.2 Test Procedures 1. Measurement is made at a semi—anechoic chamber that incorporates a turntable allowing a EUT rotation of 360°. A continuously—rotating, remotely—controlled turntable is installed at the test site to support the EUT and facilitate determination of the direction of maximum radiation for each EUT emission frequency. The EUT is placed at test table. For emissions testing at or below 1 GHz, the table height is 80 cm above the reference ground plane. For emission measurements above 1 GHz, the table height is 1.5 m 2. Measurement is made with the antenna positioned in both the horizontal and vertical planes of polarization. The measurement antenna is varied in height (1m ~ 4m) above the reference ground plane to obtain the maximum signal strength. Distance between EUT and antenna is 3 m. 3. This investigation is performed with the EUT rotated 360°, the antenna height scanned between 1 m and 4 m, and the antenna rotated to repeat the measurements for both the horizontal and vertical antenna polarizations. Note: 1. 120kHz measurement bandwidth of test receiver and Quasi—peak detector is for radiated emission below 1GHz. 2. RBW=1MHz, VBW=SMHz and Peak detector is for peak measured value of radiated emission above 1GHz. 3. RBW=1MHz, VBW=1/T and Peak detector is for average measured value of radiated emission above 1GHz. Report No.: FR563002CO Page : 8 of 18 Report Version: Rev. 03

3.1.3 Test Setup Radiated Emissions below 1 GHz Radiated Emissions above 1 GHz Report No.: FR563002CO Page : 9 of 18 Report Version: Rev. 03

3.1.4 Transmitter Radiated Unwanted Emissions (Below 1GHz) Modulation 2.4G 11b + 5G 11ac VHT20 Test Freq. (MHz) CH6 + CH157 Polarization Horizontal Test Configuration 1 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit. Report No.: FR563002CO Page : 10 of 18 Report Version: Rev. 03

Modulation 2.4G 11b + 5G 11ac VHT20 Test Freq. (MHz) CH6 + CH157 Polarization Vertical Test Configuration 1 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit. Report No.: FR563002CO Page : 11 of 18 Report Version: Rev. 03

Modulation 2.4G 11b + 5G 11ac VHT20 Test Freq. (MHz) CH6 + CH157 Polarization Horizontal Test Configuration 2 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit. Report No.: FR563002CO Page : 12 of 18 Report Version: Rev. 03

Modulation 2.4G 11b + 5G 11ac VHT20 Test Freq. (MHz) CH6 + CH157 Polarization Vertical Test Configuration 2 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit. Report No.: FR563002CO Page : 13 of 18 Report Version: Rev. 03

3.1.5 Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation 2.4G 11b + 5G 11ac VHT20 Test Freq. (MHz) CH6 + CH157 Polarization Horizontal Test Configuration 1 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Report No.: FR563002CO Page : 14 of 18 Report Version: Rev. 03

Modulation 2.4G 11b + 5G 11ac VHT20 Test Freq. (MHz) CH6 + CH157 Polarization Vertical Test Configuration 1 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Report No.: FR563002CO Page : 15 of 18 Report Version: Rev. 03

Modulation 2.4G 11b + 5G 11ac VHT20 Test Freq. (MHz) CH6 + CH157 Polarization Horizontal Test Configuration 2 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Report No.: FR563002CO Page : 16 of 18 Report Version: Rev. 03

Modulation 2.4G 11b + 5G 11ac VHT20 Test Freq. (MHz) CH6 + CH157 Polarization Vertical Test Configuration 2 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Report No.: FR563002CO Page : 17 of 18 Report Version: Rev. 03

C Infernational Certification Corp. 4 Test laboratory information Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and one of the widest certification extents in the business. International Certification Corp, it is our definitive objective is to institute long term, trust—based associations with our clients. The expectation we set up with our clients is based on outstanding service, practical expertise and devotion to a certified value structure. Our passion is to grant our clients with best EMC / RF services by oriented knowledgeable and accommodating staff. Our Test sites are located at Linkou District and Kwei Shan Hsiang. Location map can be found on our website http/www.icertifi.com.tw. Linkou Kwei Shan Kwei Shan Site II Tel: 886—2—2601—1640 Tel: 886—3—271—8666 Tel: 886—3—271—8640 No. 30—2, Ding Fwu Tsuen, Lin Kou No. 3—1, Lane 6, Wen San 3rd No. 14—1, Lane 19, Wen San 3rd District, New Taipei City, Taiwan, St., Kwei Shan Hsiang, Tao Yuan St., Kwei Shan Hsiang, Tao Yuan R.O.C. Hsien 333, Taiwan, R.O.C. Hsien 333, Taiwan, R.O.C. If you have any suggestion, please feel free to contact us as below information Tel: 886—3—271—8666 Fax: 886—3—318—0155 Email: ICC_Service@icertifi.com.tw ==END— Report No.: FR563002CO Page : 18 of 18 Report Version: Rev. 03


Document Created: 2019-07-20 09:01:48
Document Modified: 2019-07-20 09:01:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC