RF Exposure Report

FCC ID: I88VMG1312B10D

RF Exposure Info

Download: PDF
FCCID_3227517

’C@l A Test Lab Techno Corp. Changan Lab : N 0. 140—1, Changan Street, Bade District, Taoyuan City 33465, Taiwan (R.O.C) Tel : 886—3—271—0188 / Fax : 886—3—271—0190 MPE Report y Test Report No. : 1610FS16—01 Applicant : ZyXEL Communications Corporation Product Type : Wireless N VDSL2 Gateway with USB Trade Name : ZYXEL Model Number : VMG1312—B10D Date of Received : Aug. 26, 2016 Test Period : Sep. 05, 2016 Date of Issued : Nov. 29, 2016 Test Specification : ANSI / IEEE Std.C95.1—1992 / IEEE Std. 1528—2013 47 CFR § 2.1091 47 CFR § 1.1310 Location of Test Lab. : Chang—an Lab. 1. The test operations have to be performed with cautious behavior, the test results are as attached. 2. The test results are under chamber environment of A Test Lab Techno Corp. A Test Lab Techno Corp. does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples. 3. The measurement report has to be written approval of A Test Lab Techno Corp. It may only be reproduced or published in full. This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. 4. This document may be altered or revised by A Test Lab Techno. Corp. personnel only, and shall be noted in the revision section of the document. Approved By _ ’Bfl \/\\/\f Tested By : umM (Bill Hu ) (Mark Duan) ©2016 A Test Lab Techno Corp. Report Number: 1610FS16—01 Page 1 of 6

Contents 1. Description of Equipment under Test (EUT) .................................................................... 3 2. Human Exposure Assessment ........................................................................................ 4 3. RF Output Power ............................................................................................................ 5 4. Test Result ...................................................................................................................... 6 ©2016 A Test Lab Techno Corp. Report Number: 1610FS16-01 Page 2 of 6

1. Description of Equipment under Test (EUT) ZyXEL Communications Corporation Applicant No.2, Industry East Road IX, Science Park, Hsinchu, Taiwan ZyXEL Communications Corporation Manufacturer No.2, Industry East Road IX, Science Park, Hsinchu, Taiwan Product Type Wireless N VDSL2 Gateway with USB Trade Name ZYXEL Model Number VMG1312-B10D FCC ID I88VMG1312B10D Frequency Range IEEE 802.11b / 802.11g / 802.11n 2.4GHz 20MHz : 2412 - 2462 MHz IEEE 802.11n 2.4GHz 40MHz : 2422 - 2452 MHz Max. Gain ANT Model Number Type (dBi) Antenna information Ant-0 3101500652 Dipole Antenna 3 Ant-1 3101500653 Dipole Antenna 3 Directional Gain 3 dBi (please refer to RF report) IEEE 802.11b: 1TX + 1RX (Diversity) Antenna Delivery IEEE 802.11g / 802.11n 2.4GHz 20MHz / 40MHz: 2TX + 2RX (MIMO) Temperature Range 0 ~ +40°C 2 RF Evaluation 0.079 mW/cm The above equipment was tested by A Test Lab Techno Corp. For compliance with the requirements set forth in 47 CFR § 2.1091 / 47 CFR § 1.1310. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties ©2016 A Test Lab Techno Corp. Report Number: 1610FS16-01 Page 3 of 6

2. Human Exposure Assessment Due to the design and installation of this product, it is not possible to conduct SAR evaluation. This is because client either manufactures or supplies the antenna(s) that will be used in the installation of this product. Therefore, this product will be evaluated as a mobile device per 47 CFR § 1.1310 titled “Radiofrequency radiation exposure limits”, generally referred to as MPE limits. In 47 CFR § 2.1091, paragraph (b) defines a mobile device as “a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 cm is normally maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons. ” This product is intended to be installed into a vehicle such that the unit is physically secured at one location. In the installation guide supplied with the product, Client has made the following statement: “IMPORTANT: To meet the FCC’s RF Exposure Guidelines, the antenna should be installed so there is at least 20 cm of separation between the body of the user and nearby persons and the antenna”. Based on the installation of the transceiver and the antenna, the transmitters radiating structure is more than 20 cm from the user. Thus, this product is a “mobile device” as defined in section § 2.1091 paragraph (b). Exposure evaluation PG S= 4πR 2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna. ©2016 A Test Lab Techno Corp. Report Number: 1610FS16-01 Page 4 of 6

3. RF Output Power The conducted power turn-up tolerance reference manufacturer specification. Average Conducted power Frequency (dBm) Band Date Rate CH (MHz) ANT-0 ANT-1 ANT-0+1 1 2412 18.08 --- --- 1M 6 2437 18.01 --- --- 11 2462 14.79 --- --- IEEE 802.11b 2M 6 2437 18.00 --- --- 5.5M 6 2437 17.96 --- --- 11M 6 2437 17.99 --- --- 1 2412 12.86 14.94 17.03 6M 6 2437 17.85 20.39 22.31 11 2462 9.46 12.99 14.58 9M 6 2437 17.81 20.34 22.27 12M 6 2437 17.82 20.38 22.30 IEEE 802.11g 18M 6 2437 17.77 20.37 22.27 24M 6 2437 17.79 20.33 22.25 36M 6 2437 17.83 20.30 22.25 48M 6 2437 17.80 20.35 22.27 54M 6 2437 17.89 20.29 22.26 1 2412 10.36 13.18 15.01 13M 6 2437 17.03 19.64 21.54 11 2462 8.75 11.58 13.40 26M 6 2437 17.01 19.61 21.51 IEEE 802.11n 39M 6 2437 17.02 19.58 21.50 2.4GHz 52M 6 2437 16.95 19.60 21.48 20MHz 78M 6 2437 16.97 19.63 21.51 104M 6 2437 16.92 19.52 21.42 117M 6 2437 16.99 19.55 21.47 130M 6 2437 16.90 19.62 21.48 3 2422 8.46 11.41 13.19 27M 6 2437 10.43 12.50 14.60 9 2452 8.29 10.33 12.44 54M 6 2437 10.35 12.48 14.55 IEEE 802.11n 81M 6 2437 10.39 12.49 14.58 2.4GHz 108M 6 2437 10.32 12.44 14.52 40MHz 162M 6 2437 10.40 12.39 14.52 216M 6 2437 10.41 12.47 14.57 243M 6 2437 10.38 12.46 14.55 270M 6 2437 10.30 12.42 14.50 ©2016 A Test Lab Techno Corp. Report Number: 1610FS16-01 Page 5 of 6

4. Test Result Max tune-up [P] x [G] Power Distance Numeric Frequency Limit Power ANT Gain Duty with Duty cycle Density Band Data Rate [R] Gain (MHz) (mw) (upper limit) (dBi) Cycle [TP] [S] (cm) [G] [P] (dBm) (mW) (mw/cm2) 2412 1 20 19.00 3.00 2 1 158.87 0.032 IEEE 802.11b 1M 2437 1 20 19.00 3.00 2 1 158.87 0.032 (Ant-0) 2462 1 20 15.00 3.00 2 1 63.25 0.013 2412 1 20 18.00 3.00 2 1 126.19 0.025 IEEE 802.11g 6M 2437 1 20 23.00 3.00 2 1 399.05 0.079 (CDD) 2462 1 20 15.00 3.00 2 1 63.25 0.013 2412 1 20 16.00 3.00 2 1 79.62 0.016 IEEE 802.11n 2.4GHz 20MHz 13M 2437 1 20 22.00 3.00 2 1 316.98 0.063 (CDD) 2462 1 20 14.00 3.00 2 1 50.24 0.010 2422 1 20 14.00 3.00 2 1 50.24 0.010 IEEE 802.11n 2.4GHz 40MHz 27M 2437 1 20 15.00 3.00 2 1 63.25 0.013 (CDD) 2452 1 20 13.00 3.00 2 1 39.91 0.008 Note: 1. Mobile or fixed location transmitters, minimum separation distance is 20cm, even if calculations indicate MPE distance is less. 2. The Numeric Gain calculated by 10^(ant. Gain(dBi) /10). 3. Each band max power which perform MPE of any configurations. 4. The MPE results are evaluated by lowest data rate for WLAN. 5. The device operating IEEE 802.11 b mode is 1TX (Diversity) only. 6. The device operating IEEE 802.11 g/n mode is 2TX MIMO / CDD. ©2016 A Test Lab Techno Corp. Report Number: 1610FS16-01 Page 6 of 6


Document Created: 2016-11-30 18:00:01
Document Modified: 2016-11-30 18:00:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC