Module ltr

FCC ID: I88NWD670

Cover Letter(s)

Download: PDF
FCCID_816585

FCC ID: I88NWD670 Date: Jun. 27, 2007 Modular Approval Request Letter Dear Sir, There’s an 802.11b/g wireless MiniPCI Card that would like to have your authorization as a modular approval. The specific product as below, 802.11b/g wireless MiniPCI Card, with its designed features and specified description, meets special requirements for full modular approval on FCC Public Notice DA 00-1407 by cross-reference list below. Company : ZyXEL Communications Corporation Model Name : 802.11b/g wireless MiniPCI Card Model Number : NWD670 FCC ID : I88NWD670 Requirement of Public Notice DA00-1407 Reference to NWD670 1. The modular transmitter must have its own RF The module has its own RF shielding. Please see shielding. external photo.pdf 2. The modular transmitter must have buffered The modular has buffered data inputs, it is integrated modulation/data inputs. in chip AR2417. Please see diagram.pdf 3. The modular transmitter must have its own power All power lines derived from the host device are supply regulation. regulated before energizing other circuits internal to the NWD670. Please see circuit.pdf 4. The modular transmitter must comply with the antenna The NWD670 meets the FCC antenna requirements. requirements of Section 15.203 and 15.204(c). It has a unique connector. Please see external photo.pdf 5. The modular transmitter must be tested in a The NWD670 was tested in a stand-alone stand-alone configuration, i.e., the module must not be configuration via a PCMCIA extender. Please see inside another device during testing. conducted set-up photo.pdf and spurious set-up photo.pdf 6. The modular transmitter must be labeled with its own The label position of NWD670 is clearly indicated. FCC ID number, and, if the FCC ID is not visible when Please see the label.pdf the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. 7. The modular transmitter must comply with any specific The NWD670 is compliant with all applicable FCC rule or operating requirements applicable to the rules. Detail instructions are given in the Users transmitter and the manufacturer must provide adequate Manual. Please see Installation guide.pdf instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. 8. The modular transmitter must comply with any The NWD670 comply with applicable RF exposure applicable RF exposure requirements. For example, FCC requirements. Please see RF safety evaluation. pdf Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Jerry Liu Supervisor Intertek Testing Service Taiwan Ltd.


Document Created: 2007-07-03 10:57:10
Document Modified: 2007-07-03 10:57:10
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC