Test Report (NII).pdf

FCC ID: I88NBG6716

Test Report

Download: PDF
FCCID_2200133

FCC TEST REPORT (15.407) REPORT NO.: RF130511C01A-1 MODEL NO.: NBG6716, EMG2926-Q10A FCC ID: I88NBG6716 RECEIVED: Jan. 24, 2014 TESTED: Feb. 07 ~ Feb. 08, 2014 ISSUED: Feb. 25, 2014 APPLICANT: ZyXEL Communications Corporation ADDRESS: No. 6, Innovation Road II, Hsinchu Science Park No. 2, Gongye E. 9th Road, Hsinchu Science Park, Hsinchu Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF130511C01A-1 1 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................. 3 1. CERTIFICATION.......................................................................................................... 4 2. SUMMARY OF TEST RESULTS ................................................................................. 5 2.1 MEASUREMENT UNCERTAINTY ............................................................................... 5 3. GENERAL INFORMATION .......................................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT ............................................................................ 6 3.2 DESCRIPTION OF TEST MODES .............................................................................. 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .............................. 9 3.3 DESCRIPTION OF SUPPORT UNITS ...................................................................... 10 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ....................................................... 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................... 12 4. TEST TYPES AND RESULTS ................................................................................... 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................... 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................. 13 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS ............. 13 4.1.3 TEST INSTRUMENTS ............................................................................................... 14 4.1.4 TEST PROCEDURES ............................................................................................... 15 4.1.5 DEVIATION FROM TEST STANDARD...................................................................... 15 4.1.6 TEST SETUP ............................................................................................................. 16 4.1.7 EUT OPERATING CONDITION................................................................................. 16 4.1.8 TEST RESULTS ........................................................................................................ 17 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................ 19 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................... 19 4.2.2 TEST INSTRUMENTS ............................................................................................... 19 4.2.3 TEST PROCEDURES ............................................................................................... 20 4.2.4 DEVIATION FROM TEST STANDARD...................................................................... 20 4.2.5 TEST SETUP ............................................................................................................. 20 4.2.6 EUT OPERATING CONDITIONS .............................................................................. 20 4.2.7 TEST RESULTS ........................................................................................................ 21 5. PHOTOGRAPHS OF THE TEST CONFIGURATION ................................................ 23 6. INFORMATION ON THE TESTING LABORATORIES .............................................. 24 7. APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ........................................................................................ 25 Report No.: RF130511C01A-1 2 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF130511C01A-1 Original release Feb. 25, 2014 Report No.: RF130511C01A-1 3 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

1. CERTIFICATION PRODUCT: Simultaneous Dual-Band Wireless AC1750 HD Media Router MODEL: NBG6716, EMG2926-Q10A BRAND: ZyXEL APPLICANT: ZyXEL Communications Corporation TESTED: Feb. 07 ~ Feb. 08, 2014 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart E (Section 15.407) ANSI C63.10-2009 This report is issued as a supplementary report of RF130511C01-1 for changing second source. This report shall be used combining with its original report. PREPARED BY : , DATE : Feb. 25, 2014 Ivy Lin / Specialist APPROVED BY : , DATE : Feb. 25, 2014 Ken Liu / Senior Manager NOTE: The conducted and radiated emission tests were performed for the modification. Refer to original report for the other test data. Report No.: RF130511C01A-1 4 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC PART 15, SUBPART E (SECTION 15.407) STANDARD TEST TYPE RESULT REMARK SECTION Meet the requirement of limit. 15.407(b)(6) AC Power Conducted Emission PASS Minimum passing margin is -14.41dB at 0.27109MHz. Meet the requirement of limit. 15.407(b/1/2/3) Radiated Emissions PASS Minimum passing margin is (b)(6) -1.8dB at 5150.00MHz 15.407(a/1/2) Max Average Transmit Power NA Refer to Note 15.407(a)(6) Peak Power Excursion NA Refer to Note 15.407(a/1/2) Peak Power Spectral Density NA Refer to Note 15.407(g) Frequency Stability NA Refer to Note Antenna connector is I-PEX not 15.203 Antenna Requirement PASS a standard connector. NOTE: The conducted and radiated emission tests were performed for the modification. Refer to original report for the other test data. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: MEASUREMENT FREQUENCY UNCERTAINTY Conducted emissions 9kHz~30MHz 2.44 dB 30MHz ~ 200MHz 3.34 dB Radiated emissions 200MHz ~1000MHz 3.35 dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k = 2. Report No.: RF130511C01A-1 5 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT Simultaneous Dual-Band Wireless AC1750 HD Media EUT Router MODEL NO. NBG6716, EMG2926-Q10A POWER SUPPLY 12Vdc (Adapter) 64QAM, 16QAM, QPSK, BPSK MODULATION TYPE 256QAM for OFDM in 11ac mode only MODULATION TECHNOLOGY OFDM 802.11a: 54.0/ 48.0/ 36.0/ 24.0/ 18.0/ 12.0/ 9.0/ 6.0Mbps TRANSFER RATE 802.11n: up to 450.0Mbps 802.11ac: up to 1.3Gbps OPERATING FREQUENCY 5180.0 ~ 5240.0MHz 4 for 802.11a, 802.11n (20MHz) NUMBER OF CHANNEL 2 for 802.11n (40MHz) 1 for 802.11ac (80MHz) OUTPUT POWER 49.341mW ANTENNA TYPE PCB antenna with 2dBi gain ANTENNA CONNECTOR I-PEX DATA CABLE NA I/O PORTS Refer to user’s manual ACCESSORY DEVICES Adapter Report No.: RF130511C01A-1 6 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

NOTE: 1. This is a supplementary report of RF130511C01-1. This report shall be combined together with its original report. 2. This report is prepared for FCC class II permissive change. Difference compared with the original report is changing the following sources. Therefore, radiated emission and conducted emission had been re-tested and presented in the test report. Item Description USB Connector Changed source to CONN USB-A_2.0 1PORT USB-AFRA122-088 DIP LFP X’tal of PHY Changed source to X'TAL 25MHz 25ppm 20pF NXS25.000AD20F DIP LFP 2.4GHz I-PEX Changed source to RFJACK COAXIAL F 180 W08-5801-002-00-810 SMD connector LFP IC ROM-FLASH Changed from 128Mb to 32Mb IC ROM-FLAS Changed from 2 GB to 1GB WAN Port Changed to without metal case LAN Port Changed to without metal case DDR DDR updated version 3. The following models are electrically identical, different model names are for marketing purpose. BRAND MODEL NBG6716 ZyXEL EMG2926-Q10A * The model of the NBG6716 was chosen for final test. 4. The EUT incorporates a MIMO function. The EUT provides 3 completed transmitters and 3 receivers. MODULATION MODE TX FUNCTION 802.11b 3TX 802.11g 3TX 802.11a 3TX 802.11n (20MHz) 3TX 802.11n (40MHz) 3TX 802.11ac (80MHz) 3TX 5. The EUT consumes power from the following adapter. BRAND: DVE MODEL: DSA-24PFD-15 FUS 120200 INPUT: 100-240Vac, 50/60Hz, 0.8A OUTPUT: +12Vdc, 2A POWER LINE: DC 1.5m power cable w/o core attached on adapter 6. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF130511C01A-1 7 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

3.2 DESCRIPTION OF TEST MODES 4 channels are provided for 802.11a, 802.11n (20MHz): CHANNEL FREQUENCY CHANNEL FREQUENCY 36 5180MHz 44 5220MHz 40 5200MHz 48 5240MHz 2 channels are provided for 802.11n (40MHz): CHANNEL FREQUENCY CHANNEL FREQUENCY 38 5190MHz 46 5230MHz 1 channel is provided for 802.11ac (80MHz): CHANNEL FREQUENCY 42 5210MHz Report No.: RF130511C01A-1 8 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE1G RE<1G PLC - √ √ √ - Where RE1G: Radiated Emission above 1GHz RE<1G: Radiated Emission below 1GHz PLC: Power Line Conducted Emission RADIATED EMISSION TEST (ABOVE 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED MODULATION MODULATION DATA RATE CONFIGURE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) MODE - 802.11ac (80MHz) 42 42 OFDM BPSK 58.5 RADIATED EMISSION TEST (BELOW 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED MODULATION MODULATION DATA RATE CONFIGURE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) MODE - 802.11n (20MHz) 36 to 48 48 OFDM BPSK 7.2 POWER LINE CONDUCTED EMISSION TEST: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED MODULATION MODULATION DATA RATE CONFIGURE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) MODE - 802.11n (20MHz) 36 to 48 48 OFDM BPSK 7.2 TEST CONDITION: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY RE>1G 20deg. C, 65%RH 120Vac, 60Hz Jones Chang RE<1G 25deg. C, 65%RH 120Vac, 60Hz Chris Lin PLC 25deg. C, 65%RH 120Vac, 60Hz Chris Lin Report No.: RF130511C01A-1 9 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

3.3 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID 1 USB FLASH DRIVE Transcend V85 538455 4490 NA 2 USB FLASH DRIVE Transcend V85 538455 4488 NA 3 NOTEBOOK DELL E5410 1HC2XM1 FCC DoC Approved NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1 NA 2 NA 3 10m RJ45 UTP cable. NOTE: 1. All power cords of the above support units are non-shielded (1.8m). 2. Item 3 acted as a communication partner to transfer data. Report No.: RF130511C01A-1 10 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

3.3.1 CONFIGURATION OF SYSTEM UNDER TEST 1.8m RJ45 UTP cable x 4 with load EUT USB Flash Drive *2 (Power from adapter) *Test table 10m RJ45 UTP cable Notebook *Kept in a remote area Report No.: RF130511C01A-1 11 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart E (15.407) 789033 D01 General UNII Test Procedures v01 r02 662911 D01 Multiple Transmitter Output v01 r02 ANSI C63.10-2009 All test items have been performed and recorded as per the above standards. NOTE: The EUT is also considered as a kind of computer peripheral, because the connection to computer is necessary for typical use. It has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF130511C01A-1 12 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

4. TEST TYPES AND RESULTS 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table: FREQUENCIES FIELD STRENGTH MEASUREMENT DISTANCE (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS APPLICABLE TO LIMIT FIELD STRENGTH AT 3m (dBµV/m)  PK AV 74 54 EQUIVALENT FIELD STRENGTH AT 3m EIRP LIMIT (dBm) (dBµV/m) PK PK -27 68.3 NOTE: The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength: 1000000 30 P E= µV/m, where P is the eirp (Watts). 3 Report No.: RF130511C01A-1 13 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

4.1.3 TEST INSTRUMENTS DESCRIPTION & DATE OF DUE DATE OF MODEL NO. SERIAL NO. MANUFACTURER CALIBRATION CALIBRATION Test Receiver ESIB7 100187 Jan. 02, 2014 Jan. 01, 2015 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100041 Aug. 23, 2013 Aug. 22, 2014 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-160 Mar. 20, 2013 Mar. 19, 2014 SCHWARZBECK HORN Antenna 9120D 209 Sep. 12, 2013 Sep. 11, 2014 SCHWARZBECK HORN Antenna BBHA 9170 148 Jul. 15, 2013 Jul. 14, 2014 SCHWARZBECK Preamplifier 8447D 2944A10633 Oct. 07, 2013 Oct. 06, 2014 Agilent Preamplifier 8449B 3008A01964 Aug. 26, 2013 Aug. 25, 2014 Agilent RF signal cable SUCOFLEX 104 214378/4 Aug. 26, 2013 Aug. 25, 2014 HUBER+SUHNNER RF signal cable SUCOFLEX 106 12738/6+309224/4 Aug. 26, 2013 Aug. 25, 2014 HUBER+SUHNNER Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.4 Antenna Tower MA 4000 013303 NA NA inn-co GmbH Antenna Tower Controller CO2000 017303 NA NA inn-co GmbH Turn Table TT100 TT93021703 NA NA BV ADT Turn Table Controller SC100 SC93021703 NA NA BV ADT NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 3. 3. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 4. The FCC Site Registration No. is 988962. 5. The IC Site Registration No. is IC 7450F-3. Report No.: RF130511C01A-1 14 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

4.1.4 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic camber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and video bandwidth is 3MHz for Peak detection at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 1kHz(Duty cycle < 98%) or 10Hz(Duty cycle > 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.5 DEVIATION FROM TEST STANDARD No deviation. Report No.: RF130511C01A-1 15 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

4.1.6 TEST SETUP For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.7 EUT OPERATING CONDITION a. Placed the EUT on the testing table. b. Prepared notebook to act as communication partner and placed it outside of testing area. c. The communication partner connected with EUT via a RJ45 cable and ran a test program (provided by manufacturer) to enable EUT under transmission condition continuously at specific channel frequency. d. The communication partner sent data to EUT by command "PING". e. The necessary accessories enabled the system in full functions. Report No.: RF130511C01A-1 16 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

4.1.8 TEST RESULTS ABOVE 1GHz DATA：802.11ac (80MHz) EUT TEST CONDITION MEBSUREMENT DETBIL CHBNNEL Channel 42 FREQUENCY RBNGE 1 ~ 40GHz INPUT POWER DETECTOR Peak (PK) 120Vac, 60Hz (SYSTEM) FUNCTION Average (AV) ENVIRONMENTBL 20deg. C, 65%RH TESTED BY Jones Chang CONDITIONS ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 5150.00 65.0 PK 74.0 -9.0 1.00 H 151 59.90 5.10 2 5150.00 50.8 AV 54.0 -3.2 1.00 H 151 45.70 5.10 3 *5210.00 102.8 PK 1.01 H 359 65.00 37.80 4 *5210.00 92.8 AV 1.01 H 360 55.00 37.80 5 #10420.00 60.8 PK 74.0 -13.2 1.00 H 233 42.00 18.80 6 #10420.00 48.3 AV 54.0 -5.7 1.00 H 233 29.50 18.80 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 5150.00 66.6 PK 74.0 -7.4 1.49 V 34 61.50 5.10 2 5150.00 52.2 AV 54.0 -1.8 1.49 V 34 47.10 5.10 3 *5210.00 107.2 PK 1.01 V 180 69.40 37.80 4 *5210.00 96.8 AV 1.01 V 180 59.00 37.80 5 #10420.00 60.3 PK 74.0 -13.7 1.00 V 300 41.50 18.80 6 #10420.00 48.8 AV 54.0 -5.2 1.00 V 300 30.00 18.80 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. “ * “: Fundamental frequency. 6. "#":The radiated frequency is out the restricted band. Report No.: RF130511C01A-1 17 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

BELOW 1GHz WORST-CASE DATA：802.11n (20MHz) EUT TEST CONDITION MEASUREMENT DETAIL CHANNEL Channel 48 FREQUENCY RANGE Below 1000MHz INPUT POWER DETECTOR 120Vac, 60 Hz Quasi-Peak (SYSTEM) FUNCTION ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Chris Lin CONDITIONS ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 300.16 34.9 QP 46.0 -11.1 1.25 H 5 47.20 -12.30 2 374.04 32.5 QP 46.0 -13.5 1.00 H 318 43.40 -10.90 3 440.14 28.3 QP 46.0 -17.7 1.50 H 337 37.70 -9.40 4 624.85 31.2 QP 46.0 -14.8 1.00 H 193 36.70 -5.50 5 751.23 33.0 QP 46.0 -13.0 1.25 H 40 36.00 -3.00 6 961.21 35.7 QP 54.0 -18.3 1.50 H 315 35.00 0.70 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 55.18 30.4 QP 40.0 -9.6 1.25 V 6 44.70 -14.30 2 103.78 26.4 QP 43.5 -17.1 1.00 V 4 44.50 -18.10 3 152.39 24.2 QP 43.5 -19.3 1.50 V 284 37.80 -13.60 4 374.04 25.7 QP 46.0 -20.3 1.25 V 140 36.60 -10.90 5 624.85 36.4 QP 46.0 -9.6 1.00 V 186 41.90 -5.50 6 908.72 36.3 QP 46.0 -9.7 1.50 V 91 36.40 -0.10 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF130511C01A-1 18 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

4.2 CONDUCTED EMISSION MEASUREMENT 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) CONDUCTED LIMIT (dBµV) Quasi-peak Average 0.15 ~ 0.5 66 to 56 56 to 46 0.5 ~ 5 56 46 5 ~ 30 60 50 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 3. All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. 4.2.2 TEST INSTRUMENTS Description & Model No. Serial No. Cal. Date Cal. Due Manufacturer Test Receiver ESCS30 100288 Nov. 17, 2013 Nov. 16, 2014 ROHDE & SCHWARZ RF signal cable 5D-FB Cable-HYCO2-01 Dec. 27, 2013 Dec. 26, 2014 Woken LISN ROHDE & SCHWARZ ESH2-Z5 100100 Dec. 23, 2013 Dec. 22, 2014 (EUT) LISN ROHDE & SCHWARZ ESH3-Z5 100312 Jul. 08, 2013 Jul. 07, 2014 (Peripheral) Software BV ADT_Cond_ NA NA NA ADT V7.3.7.3 Notes: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Shielded Room 2. 3. The VCCI Site Registration No. is C-2047. Report No.: RF130511C01A-1 19 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

4.2.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. NOTE: All modes of operation were investigated and the worst-case emissions are reported. 4.2.4 DEVIATION FROM TEST STANDARD No deviation. 4.2.5 TEST SETUP V e r tic a l G r o u n d R e fe r e n c e P la n e Te s t R e c e iv e r EUT 40cm 80cm L IS N H o r iz o n ta l G r o u n d R e fe r e n c e P la n e N o te : 1 .S u p p o r t u n its w e r e c o n n e c te d to s e c o n d L IS N . 2 .B o th o f L IS N s ( A M N ) a r e 8 0 c m fr o m E U T a n d a t le a s t 8 0 fr o m o th e r u n its a n d o th e r m e ta l p la n e s For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT OPERATING CONDITIONS Same as 4.1.6. Report No.: RF130511C01A-1 20 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

4.2.7 TEST RESULTS CONDUCTED WORST-CASE DATA：802.11n (20MHz) PHASE Line 1 6dB BANDWIDTH 9kHz Emission Corr. Reading Value Limit Margin Freq. Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 0.26 41.39 22.06 41.65 22.32 66.00 56.00 -24.35 -33.68 2 0.27109 0.29 39.06 36.39 39.35 36.68 61.08 51.08 -21.74 -14.41 3 0.81406 0.33 28.34 22.13 28.67 22.46 56.00 46.00 -27.33 -23.54 4 2.93750 0.39 30.07 24.63 30.46 25.02 56.00 46.00 -25.54 -20.98 5 5.23828 0.44 33.65 28.77 34.09 29.21 60.00 50.00 -25.91 -20.79 6 7.71875 0.47 33.46 28.48 33.93 28.95 60.00 50.00 -26.07 -21.05 REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF130511C01A-1 21 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

PHASE Line 2 6dB BANDWIDTH 9kHz Emission Corr. Reading Value Limit Margin Freq. Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.16172 0.27 42.26 30.67 42.53 30.94 65.38 55.38 -22.85 -24.44 2 0.26719 0.29 39.29 34.32 39.58 34.61 61.20 51.20 -21.63 -16.60 3 0.78672 0.33 24.57 18.15 24.90 18.48 56.00 46.00 -31.10 -27.52 4 3.30859 0.42 30.93 25.30 31.35 25.72 56.00 46.00 -24.65 -20.28 5 5.45703 0.46 33.36 28.44 33.82 28.90 60.00 50.00 -26.18 -21.10 6 7.81250 0.49 33.52 28.81 34.01 29.30 60.00 50.00 -25.99 -20.70 REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF130511C01A-1 22 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF130511C01A-1 23 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. Report No.: RF130511C01A-1 24 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06

7. APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test. ---END--- Report No.: RF130511C01A-1 25 of 25 Report Format Version 5.1.0 Reference No.: 130511C01, 140124C06


Document Created: 2014-02-25 17:29:23
Document Modified: 2014-02-25 17:29:23
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC