RFx

FCC ID: I88IPC2605N

RF Exposure Info

Download: PDF

FCCID_1740530

MPE Calculation (for Mobile Device)

FCC ID: I88IPC2605N

Typical use distance: d ≥ 20 cm
Power density limit for mobile devices at 2.4 and 5 GHz: S ≤ 1 mW/cm2
Remark: Average ≤ Peak, which means that calculating the power density applying Peak power is worst case.
The worst case operation mode generating the highest power in each frequency range is taken for calculation.

Frequency range: 2412-2462MHz; 2422-2452MHz;
Maximum measured conducted power (Average): Pconducted = 10.68 dBm
Antenna Gain: G = 3 dBi
Calculation: Pradiated = Pconducted + Glinear = 10.68 dBm + 3 dBi = 13.68 dBm = 23.33 mW
Power density S = (Pradiated) / (4π x d2) = 23.33 / 5026 = 0.0047 mW/cm2 which is far below the limit, so pass.

Document Created: 2019-09-24 12:46:25
Document Modified: 2019-09-24 12:46:25

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC