Modular Approval Letter

FCC ID: I88G663

Cover Letter(s)

Download: PDF
FCCID_623918

FCC ID: I88G663 Date: Jan. 23, 2006 Modular Approval Request Letter Dear Sir, There’s an 802.11G WIRELESS LAN MODULE that would like to have your authorization as a modular approval. The specific product as below, 802.11G WIRELESS LAN MODULE, with its designed features and specified description, meets special requirements for full modular approval on FCC Public Notice DA 00-1407 by cross-reference list below. Company : ZyXEL Communications Corporation Model Name : 802.11G WIRELESS LAN MODULE Model Number : G-663 FCC ID : I88G663 Requirement of Public Notice DA00-1407 Reference to G-663 1. The modular transmitter must have its own RF The module has its own RF shielding. Please see shielding. external photo.pdf 2. The modular transmitter must have buffered The modular has buffered data inputs, it is integrated modulation/data inputs. in chip TNETW1350A. Please see diagram.pdf 3. The modular transmitter must have its own power All power lines derived from the host device are supply regulation. regulated before energizing other circuits internal to the G-663. Please see circuit.pdf 4. The modular transmitter must comply with the antenna The G-663 meets the FCC antenna requirements. It requirements of Section 15.203 and 15.204(c). has a unique connector. Please see external photo.pdf 5. The modular transmitter must be tested in a The G-663 was tested in a stand-alone configuration stand-alone configuration, i.e., the module must not be via a PCMCIA extender. Please see conducted inside another device during testing. set-up photo.pdf and spurious set-up photo.pdf 6. The modular transmitter must be labeled with its own The label position of G-663 is clearly indicated. FCC ID number, and, if the FCC ID is not visible when Please see the label.pdf the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. 7. The modular transmitter must comply with any specific The G-663 is compliant with all applicable FCC rule or operating requirements applicable to the rules. Detail instructions are given in the Users transmitter and the manufacturer must provide adequate Manual. Please see Installation guide.pdf instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. 8. The modular transmitter must comply with any The G-663 comply with applicable RF exposure applicable RF exposure requirements. For example, FCC requirements. Please see RF safety evaluation. pdf Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Yours sincerely, Jerry Liu Supervisor Intertek Testing Service Taiwan Ltd.


Document Created: 2006-01-27 11:37:45
Document Modified: 2006-01-27 11:37:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC