Test Report for Co-located

FCC ID: I88EMG3425Q10A

Test Report

Download: PDF
FCCID_2776247

FCC Co-Location Test Report FCC ID : I88EMG3425Q10A Equipment : Simultaneous Dual-Band Wireless AC2200 Gigabit Ethernet Gateway Model No. : EMG3425-Q10A Brand Name : ZyXEL Applicant : ZyXEL Communications Corporation Address : No. 2, Gongye E. 9th Road, Hsinchu Science Park, Hsinchu, Taiwan. Standard : 47 CFR FCC Part 15.247 47 CFR FCC Part 15.407 Received Date : Jun. 16, 2015 Tested Date : Aug. 10 ~ Aug. 14, 2015 We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Approved & Reviewed by: Gary Chang / Manager Ty: XXX Report No.: FR570601CO Page : 1 of 15 Report Version: Rev. 01

Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 The Equipment List ................................................................................................................................ 6 1.3 Test Standards ....................................................................................................................................... 7 1.4 Measurement Uncertainty ...................................................................................................................... 7 2 TEST CONFIGURATION ....................................................................................................................... 8 2.1 Testing Condition ................................................................................................................................... 8 2.2 The Worst Test Modes and Channel Details ......................................................................................... 8 3 TRANSMITTER TEST RESULTS.......................................................................................................... 9 3.1 Unwanted Emissions into Restricted Frequency Bands ........................................................................ 9 4 TEST LABORATORY INFORMATION ...............................................................................................15 Report No.: FR570601CO Page : 2 of 15 Report Version: Rev. 01

Release Record Report No. Version Description Issued Date FR570601CO Rev. 01 Initial issue Sep. 09, 2015 Report No.: FR570601CO Page : 3 of 15 Report Version: Rev. 01

Summary of Test Results FCC Rules Test Items Measured Result 15.247(d) [dBuV/m at 3m]: 2787.00MHz 15.407(b) Radiated Emissions Pass 50.05 (Margin -3.95dB) – AV 15.209 Report No.: FR570601CO Page : 4 of 15 Report Version: Rev. 01

1 General Description 1.1 Information 1.1.1 Specification of the Equipment under Test (EUT) 802.11b/g/n: 2412 MHz ~ 2462 MHz Operating Frequency 802.11a/n/ac: 5180 MHz ~ 5240 MHz; 5745 MHz ~ 5825 MHz 802.11b: DSSS (DBPSK / DQPSK / CCK) Modulaton Type 802.11a/g/n/ac: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM) 1.1.2 Antenna Details Operating Frequency / Gain (dBi) Ant. No. Type Connector 2.4GHz 5GHz 1 Dipole 1.53 1.92 UFL 1.1.3 Power Supply Type of Equipment under Test (EUT) Power Supply Type 12Vdc from AC adapter 1.1.4 Accessories Accessories No. Equipment Description Brand Name: APD Model Name: DA-48T12 Power Rating: I/P: 100-240Vac, 50-60Hz, 1.4A Max 1 AC adapter O/P: 12Vdc, 4A Power Line: AC 1.5m non-shielded cable w/o core DC 1.2m non-shielded cable w/o core Brand Name: APD Model Name: WA-36A12FU Power Rating: 2 AC adapter I/P: 100-240Vac, 50-60Hz, 0.9A Max O/P: 12Vdc, 3A Power Line: DC 1.5m non-shielded cable with one core 3 RJ45 cable 1.0m non-shielded cable w/o core. Report No.: FR570601CO Page : 5 of 15 Report Version: Rev. 01

1.2 The Equipment List Test Item Radiated Emission Test Site 966 chamber 3 / (03CH03-WS) Instrument Manufacturer Model No. Serial No. Calibration Date Calibration Until Spectrum Analyzer Agilent N9010A MY53400091 Sep. 16, 2014 Sep. 15, 2015 Receiver Agilent N9038A MY53290044 Oct. 21, 2014 Oct. 20, 2015 Bilog Antenna SCHWARZBECK VULB9168 VULB9168-562 Jan. 19, 2015 Jan. 18, 2016 Horn Antenna SCHWARZBECK BBHA 9120 D BBHA 9120 D 1206 Feb. 03, 2015 Feb. 02, 2016 1G-18G Horn Antenna SCHWARZBECK BBHA 9170 BBHA 9170517 Nov. 10, 2014 Nov. 09, 2015 18G-40G Loop Antenna R&S HFH2-Z2 11900 Nov. 10, 2014 Nov. 09, 2015 Preamplifier EMC EMC02325 980187 Sep. 26, 2014 Sep. 25, 2015 Preamplifier Agilent 83017A MY53270014 Sep. 17, 2014 Sep. 16, 2015 Preamplifier EMC EMC184045B 980192 Aug. 26, 2014 Aug. 25, 2015 RF cable-3M HUBER+SUHNER SUCOFLEX104 MY22620/4 Feb. 09, 2015 Feb. 08, 2016 RF cable-8M HUBER+SUHNER SUCOFLEX104 MY22601/4 Feb. 09, 2015 Feb. 08, 2016 RF cable-1M HUBER+SUHNER SUCOFLEX104 MY22624/4 Feb. 09, 2015 Feb. 08, 2016 LF cable-0.8M EMC EMC8D-NM-NM-800 EMC8D-NM-NM-800-001 Feb. 09, 2015 Feb. 08, 2016 LF cable-3M EMC EMC8D-NM-NM-3000 131103 Feb. 09, 2015 Feb. 08, 2016 LF cable-13M EMC EMC8D-NM-NM-13000 131104 Feb. 09, 2015 Feb. 08, 2016 Measurement AUDIX e3 6.120210g NA NA Software Note: Calibration Interval of instruments listed above is one year. Report No.: FR570601CO Page : 6 of 15 Report Version: Rev. 01

C Infernational Certification Corp. 1.3 Test Standards According to the specification of EUT, the EUT must comply with following standards and KDB documents. 47 CFR FCC Part 15.247 47 CFR FCC Part 15.407 ANSI C63.10—2013 FCC KDB 558074 D01 DTS Meas Guidance v03r03 FCC KDB 662911 DO1 Multiple Transmitter Output v02r01 FCC KDB 789033 D02 General UNIl Test Procedures New Rules vO1 FCC KDB 644545 D03 Guidance for IEEE 802 11ac New Rules vQ1 FCC KDB 412172 DQ1 Determining ERP and EIRP vO1r01 1.4 Measurement Uncertainty I1SO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2) Measurement Uncertainty Parameters Uncertainty Radiated emission < 1GHz +3.99 dB Radiated emission > 1GHz £+5.52 dB Report No.: FR570601CO Page : 7 of 15 Report Version: Rev. 01

C Infernational Certification Corp. 2 Test Configuration 2.1 Testing Condition Test Item Test Site Ambient Condition Tested By . has o L Anderson Hong Radiated Emissions O3CHO3—WS 21—22°C / 62—67% Warren Lee » FCC site registration No.: 390588 » IC site registration No.: 10807C—1 2.2 The Worst Test Modes and Channel Details Test item Modulation Mode Test Frequency Data Rate (MH2) Radiated Emissions 2.4G 11g + 5G 11ac VHT4O0 CH6 + CH46 6Mbps + MCS 0 NOTE: Adapter 1 and Adapter 2 had been pretested and found that Adapter 1 was the worst case and was selected for final testing. (Adapter 1: DA—48T12; Adapter 2: WA—36A12FU). Report No.: FR570601CO Page : 8 of 15 Report Version: Rev. 01

C Infernational Certification Corp. 3 Transmitter Test Results 3.1 Unwanted Emissions into Restricted Frequency Bands 3.1.1 Limit of Unwanted Emissions into Restricted Frequency Bands Restricted Band Emissions Limit Frequency Range (MHz)| Field Strength (uV/m) |Field Strength (dBuV/m)| Measure Distance (m) 0.009~0.490 2400/F(kHz) 48.5 — 13.8 300 0.490~1.705 24000/F(kHz) 33.8 — 23 30 1.705~30.0 30 29 30 30~88 100 40 3 88~216 150 43.5 3 216~960 200 46 3 Above 960 500 54 3 Note 1: Qusai—Peak value is measured for frequency below 1GHz except for 9—90 kHz, 110—490 kHz frequency band. Peak and average value are measured for frequency above 1GHz. The limit on average radio frequency emission is as above table. The limit on peak radio frequency emissions is 20 dB above the maximum permitted average emission limit Note 2: Measurements may be performed at a distance other than what is specified provided. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor as below, Frequency at or above 30 MHz: 20 dB/decade Frequency below 30 MHz: 40 dB/decade. 3.1.2 Test Procedures 1. Measurement is made at a semi—anechoic chamber that incorporates a turntable allowing a EUT rotation of 360°. A continuously—rotating, remotely—controlled turntable is installed at the test site to support the EUT and facilitate determination of the direction of maximum radiation for each EUT emission frequency. The EUT is placed at test table. For emissions testing at or below 1 GHz, the table height is 80 cm above the reference ground plane. For emission measurements above 1 GHz, the table height is 1.5 m 2. Measurement is made with the antenna positioned in both the horizontal and vertical planes of polarization. The measurement antenna is varied in height (1m ~4m) above the reference ground plane to obtain the maximum signal strength. Distance between EUT and antenna is 3 m. 3. This investigation is performed with the EUT rotated 360°, the antenna height scanned between 1 m and 4 m, and the antenna rotated to repeat the measurements for both the horizontal and vertical antenna polarizations. Note: 1. 120kHz measurement bandwidth of test receiver and Quasi—peak detector is for radiated emission below 1GHz. 2. RBW=1MHz, VBW=3MHz and Peak detector is for peak measured value of radiated emission above 1GHz. 3. RBW=1MHz, VBW=1/T and Peak detector is for average measured value of radiated emission above 1GHz. Report No.: FR570601CO Page : 9 of 15 Report Version: Rev. 01

3.1.3 Test Setup Radiated Emissions below 1 GHz Radiated Emissions above 1 GHz Report No.: FR570601CO Page : 10 of 15 Report Version: Rev. 01

3.1.4 Transmitter Radiated Unwanted Emissions (Below 1GHz) Modulation 2.4G 11g + 5G 11ac VHT40 Test Freq. (MHz) CH6 + CH46 Polarization Horizontal Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit. Report No.: FR570601CO Page : 11 of 15 Report Version: Rev. 01

Modulation 2.4G 11g + 5G 11ac VHT40 Test Freq. (MHz) CH6 + CH46 Polarization Vertical Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit. Report No.: FR570601CO Page : 12 of 15 Report Version: Rev. 01

3.1.5 Transmitter Radiated Unwanted Emissions (Above 1GHz) Modulation 2.4G 11g + 5G 11ac VHT40 Test Freq. (MHz) CH6 + CH46 Polarization Horizontal Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Report No.: FR570601CO Page : 13 of 15 Report Version: Rev. 01

Modulation 2.4G 11g + 5G 11ac VHT40 Test Freq. (MHz) CH6 + CH46 Polarization Vertical Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Report No.: FR570601CO Page : 14 of 15 Report Version: Rev. 01

C Infernational Certification Corp. 4 Test laboratory information Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and one of the widest certification extents in the business. International Certification Corp, it is our definitive objective is to institute long term, trust—based associations with our clients. The expectation we set up with our clients is based on outstanding service, practical expertise and devotion to a certified value structure. Our passion is to grant our clients with best EMC / RF services by oriented knowledgeable and accommodating staff. Our Test sites are located at Linkou District and Kwei Shan Hsiang. Location map can be found on our website http://www.icertifi.com.tw. Linkou Kwei Shan Kwei Shan Site II Tel: 886—2—2601—1640 Tel: 886—3—271—8666 Tel: 886—3—271—8640 No. 30—2, Ding Fwu Tsuen, Lin Kou No. 3—1, Lane 6, Wen San 3rd No. 14—1, Lane 19, Wen San 3rd District, New Taipei City, Taiwan, St., Kwei Shan Hsiang, Tao Yuan St., Kwei Shan Hsiang, Tao Yuan R.0.C. Hsien 333, Taiwan, R.0.C. Hsien 333, Taiwan, R.0.C. If you have any suggestion, please feel free to contact us as below information Tel: 886—3—271—8666 Fax: 886—3—318—0155 Email: ICC_Service@icertifi.com.tw ==END= Report No.: FR570601CO Page : 15 of 15 Report Version: Rev. 01


Document Created: 2015-09-11 16:13:22
Document Modified: 2015-09-11 16:13:22
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC