Test Report

FCC ID: I88EMG2926Q10A

Test Report

Download: PDF
FCCID_2875995

FCC Test Report Report No.: RF130511C01F FCC ID: I88EMG2926Q10A Test Model: EMG2926-Q10A Series Model: NBG6716 Received Date: Oct. 30, 2015 Test Date: Nov. 10 ~ Nov. 17, 2015 Issued Date: Dec. 29, 2015 Applicant: ZyXEL Communications Corporation Address: No. 2, Gongye E. 9th Road, Hsinchu Science Park, Hsinchu Taiwan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130511C01F Page No. 1 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail............................................................................. 9 3.3 Description of Support Units ............................................................................................................. 10 3.3.1 Configuration of System under Test .................................................................................................. 10 3.4 General Description of Applied Standards ......................................................................................... 11 4 Test Types and Results ...................................................................................................................... 12 4.1 Radiated Emission and Bandedge Measurement............................................................................. 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 12 4.1.2 Test Instruments ................................................................................................................................ 13 4.1.3 Test Procedures................................................................................................................................. 14 4.1.4 Deviation from Test Standard ............................................................................................................ 14 4.1.5 Test Set Up ........................................................................................................................................ 15 4.1.6 EUT Operating Conditions................................................................................................................. 15 4.1.7 Test Results ....................................................................................................................................... 16 4.2 Conducted Emission Measurement .................................................................................................. 17 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 17 4.2.2 Test Instruments ................................................................................................................................ 17 4.2.3 Test Procedures................................................................................................................................. 18 4.2.4 Deviation from Test Standard ............................................................................................................ 18 4.2.5 Test Setup .......................................................................................................................................... 18 4.2.6 EUT Operating Conditions................................................................................................................. 18 4.2.7 Test Results ....................................................................................................................................... 19 5 Pictures of Test Arrangements .......................................................................................................... 21 Appendix – Information on the Testing Laboratories ................................................................................ 22 Report No.: RF130511C01F Page No. 2 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

Release Control Record Issue No. Description Date Issued RF130511C01F Original release. Dec. 29, 2015 Report No.: RF130511C01F Page No. 3 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

1 Certificate of Conformity Product: Dual-Band Wireless AC/N Gigabit Ethernet Gateway Brand: ZyXEL Test Model: EMG2926-Q10A Series Model: NBG6716 Sample Status: Engineering sample Applicant: ZyXEL Communications Corporation Test Date: Nov. 10 ~ Nov. 17, 2015 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10:2013 This report is issued as a supplementary report of RF130511C01B. This report shall be used combined together with its original report. Prepared by : , Date: Dec. 29, 2015 Ivy Lin / Specialist Approved by : , Date: Dec. 29, 2015 Ken Liu / Senior Manager Note: Radiated emission below 1GHz and conducted emission items are performed for the addendum. Refer to original report for the other test data. Report No.: RF130511C01F Page No. 4 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.247) FCC Test Item Result Remarks Clause Meet the requirement of limit. 15.207 AC Power Conducted Emission Pass Minimum passing margin is -19.86dB at 0.15000MHz 15.205 / Meet the requirement of limit. Radiated Emissions and Band Edge 15.209 / Pass Minimum passing margin is -5.7dB at Measurement 15.247(d) 900.94MHz 15.247(d) Antenna Port Emission N/A Refer to Note 15.247(a)(2) 6dB bandwidth N/A Refer to Note 15.247(b) Conducted power N/A Refer to Note 15.247(e) Power Spectral Density N/A Refer to Note Antenna connector is I-PEX not a 15.203 Antenna Requirement Pass standard connector. Note: Radiated emission below 1GHz and conducted emission items are performed for the addendum. Refer to original report for the other test data. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expended Uncertainty Measurement Frequency (k=2) (±) Conducted Emissions at mains ports 150kHz ~ 30MHz 2.44 dB 30MHz ~ 200MHz 3.86 dB Radiated Emissions up to 1 GHz 200MHz ~1000MHz 3.87 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF130511C01F Page No. 5 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

3 General Information 3.1 General Description of EUT Product Dual-Band Wireless AC/N Gigabit Ethernet Gateway Brand ZyXEL Test Model EMG2926-Q10A Series Model NBG6716 Model Difference Refer to Note Sample Status Engineering sample Power Supply Rating 12Vdc from adapter CCK, DQPSK, DBPSK for DSSS Modulation Type 64QAM, 16QAM, QPSK, BPSK for OFDM Modulation Technology DSSS, OFDM 802.11b:11.0/ 5.5/ 2.0/ 1.0Mbps Transfer Rate 802.11g: 54.0/ 48.0/ 36.0/ 24.0/ 18.0/ 12.0/ 9.0/ 6.0Mbps 802.11n: up to 450Mbps Operating Frequency 2412 ~ 2462MHz 11 for 802.11b, 802.11g, 802.11n (HT20) Number of Channel 7 for 802.11n (HT40) Output Power 830.032mW Antenna Type PCB antenna with 2dBi gain Antenna Connector I-PEX Accessory Device Adapter Data Cable Supplied N/A Note: 1. This report is prepared for FCC class II permissive change. 2. This report is issued as a supplementary report of BVADT report no.: RF130511C01B. This report shall be combined together with its original report. 3. The device hardware and digital circuitry are identical with original certified. Difference compared with the original report are adding one adapter and adding one model name. Therefore, we re-tested radiated emission below 1GHz and conducted emission tests and presented in the test report. 4. All models are listed as below. Model EMG2926-Q10A is the representative for final test. (New model is marked in boldface and gray) Brand Model Difference EMG2926-Q10A All models are electrically identical, different models are for ZyXEL NBG6716 marketing purpose. 5. The EUT incorporates a MIMO function. Physically, the EUT provides 3 completed transmitters and 3 receivers. Modulation Mode TX Function 802.11b 3TX 802.11g 3TX 802.11n (HT20) 3TX 802.11n (HT40) 3TX Report No.: RF130511C01F Page No. 6 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

6. The EUT consumes power from the following adapter. Brand DVE Model DSA-24PFM-12 FUS 120200 Input Power 100-240Vac, 50/60Hz, 0.8A Output Power +12Vdc/ 2A Power Line DC 1.45m power cable w/o core attached on adapter 7. The following antenna was provided to the EUT. Type Brand Model Gain(dBi) Connector PCB LYNwave ALC120-051022-080750 2 I-PEX Report No.: RF130511C01F Page No. 7 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

3.2 Description of Test Modes 11 channels are provided for 802.11b, 802.11g and 802.11n (HT20): Channel Frequency Channel Frequency 1 2412MHz 7 2442MHz 2 2417MHz 8 2447MHz 3 2422MHz 9 2452MHz 4 2427MHz 10 2457MHz 5 2432MHz 11 2462MHz 6 2437MHz 7 channels are provided for 802.11n (HT40): Channel Frequency Channel Frequency 3 2422MHz 7 2442MHz 4 2427MHz 8 2447MHz 5 2432MHz 9 2452MHz 6 2437MHz Report No.: RF130511C01F Page No. 8 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

3.2.1 Test Mode Applicability and Tested Channel Detail EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE<1G PLC - √ √ Adapter: DSA-24PFM-12 FUS 120200 Where RE<1G: Radiated Emission below 1GHz PLC: Power Line Conducted Emission Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED MODULATION MODULATION DATA RATE CONFIGURE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) MODE - 802.11g 1 to 11 11 OFDM BPSK 6.0 Power Line Conducted Emission Test: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT AVAILABLE TESTED MODULATION MODULATION DATA RATE CONFIGURE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) MODE - 802.11g 1 to 11 11 OFDM BPSK 6.0 Test Condition: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY RE<1G 18deg. C, 70%RH 120Vac, 60Hz Jones Chang PLC 25deg. C, 70%RH 120Vac, 60Hz Jones Chang Report No.: RF130511C01F Page No. 9 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

3.3 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Notebook DELL E5410 1HC2XM1 FCC DoC Approved - B. USB FLASH HP v250W 01 FCC DoC Approved - C. USB FLASH HP v250W 01 FCC DoC Approved - D. Load N/A N/A N/A N/A - Note: 1. All power cords of the above support units are non-shielded (1.8m). 2. Items A acted as a communication partner to transfer data. Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. LAN cable 1 5 N 0 - 2. LAN cable 2 1 N 0 - 3. LAN cable 1 0.5 N 0 - 3.3.1 Configuration of System under Test EUT (2) USB Flash (B, C) USB LAN Load (D) (3) LAN Adapter (EUT) DC LAN LAN LAN (1) Remote site Notebook (A) Report No.: RF130511C01F Page No. 10 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

3.4 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) 558074 D01 DTS Meas Guidance v03r03 662911 D01 Multiple Transmitter Output v02r01 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Note: The EUT is also considered as a kind of computer peripheral, because the connection to computer is necessary for typical use. It has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF130511C01F Page No. 11 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 Note: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 30dB under any condition of modulation. Report No.: RF130511C01F Page No. 12 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

4.1.2 Test Instruments Test Date: Nov. 10, 2015 Description & Model No. Serial No. Cal. Date Cal. Due Manufacturer Test Receiver ESIB7 100187 Apr. 10, 2015 Apr. 09, 2016 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100041 Sep. 02, 2015 Sep. 01, 2016 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-160 Feb. 05, 2015 Feb. 04, 2016 SCHWARZBECK HORN Antenna 9120D 209 Feb. 09, 2015 Feb. 08, 2016 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170241 Feb. 09, 2015 Feb. 08, 2016 SCHWARZBECK Preamplifier 8447D 2944A10738 Oct.18, 2015 Oct. 17, 2016 Agilent Preamplifier 8449B 3008A01964 Aug. 22, 2015 Aug. 21, 2016 Agilent RF signal cable SUCOFLEX 104 Cable-CH3-03 (214378) Aug. 22, 2015 Aug. 21, 2016 HUBER+SUHNER RF signal cable Cable-CH3-03 SUCOFLEX 106 Aug. 22, 2015 Aug. 21, 2016 HUBER+SUHNER (309224+12738) Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.4 Antenna Tower MA 4000 013303 NA NA inn-co GmbH Antenna Tower Controller AT100 AT93021702 NA NA BV ADT Turn Table TT100 TT93021702 NA NA BV ADT Turn Table Controller SC100 SC93021702 NA NA BV ADT High Speed Peak Power ML2495A 0824011 Jul. 09, 2015 Jul. 08, 2016 Meter Power Sensor MA2411B 0738171 Jul. 09, 2015 Jul. 08, 2016 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 3. 3. The horn antenna and preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 4. The FCC Site Registration No. is 988962. 5. The IC Site Registration No. is IC 7450F-3. Report No.: RF130511C01F Page No. 13 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

4.1.3 Test Procedures a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF130511C01F Page No. 14 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

4.1.5 Test Set Up Ant. Tower 1-4m Variable EUT& 3m 10m Support Units Turn Table 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Placed the EUT on the testing table. b. Prepared notebook to act as communication partner and placed it outside of testing area. c. The communication partner connected with EUT via a RJ45 cable and ran a test program (provided by manufacturer) to enable EUT under transmission condition continuously at specific channel frequency. d. The necessary accessories enable the system in full functions. Report No.: RF130511C01F Page No. 15 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

4.1.7 Test Results BELOW 1GHz WORST-CASE DATA 802.11g CHANNEL TX Channel 11 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 30MHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 57.12 31.0 QP 40.0 -9.0 1.99 H 266 45.80 -14.80 2 154.33 27.1 QP 43.5 -16.4 1.50 H 270 40.90 -13.80 3 241.83 29.3 QP 46.0 -16.7 1.00 H 114 44.00 -14.70 4 374.04 33.5 QP 46.0 -12.5 1.00 H 238 44.60 -11.10 5 624.85 34.1 QP 46.0 -11.9 1.50 H 317 39.60 -5.50 6 900.94 40.1 QP 46.0 -5.9 1.50 H 135 40.70 -0.60 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 35.73 33.8 QP 40.0 -6.2 1.00 V 217 49.50 -15.70 2 374.04 34.6 QP 46.0 -11.4 1.50 V 82 45.70 -11.10 3 500.42 33.0 QP 46.0 -13.0 1.00 V 177 41.40 -8.40 4 624.85 35.9 QP 46.0 -10.1 1.50 V 165 41.40 -5.50 5 753.18 31.8 QP 46.0 -14.2 1.50 V 6 34.90 -3.10 6 900.94 40.3 QP 46.0 -5.7 1.00 V 16 40.90 -0.60 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF130511C01F Page No. 16 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments Test Date: Nov. 17, 2015 Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due Test Receiver ESCI 100613 Nov. 16, 2015 Nov. 15, 2016 ROHDE & SCHWARZ RF signal cable (with 10dB PAD) 5D-FB Cable-cond1-01 Dec. 26, 2014 Dec. 25, 2015 Woken LISN ROHDE & SCHWARZ ESH3-Z5 835239/001 Feb. 26, 2015 Feb. 25, 2016 (EUT) LISN ROHDE & SCHWARZ ESH3-Z5 100311 Jul. 24, 2015 Jul. 23, 2016 (Peripheral) Software BV ADT_Cond_ NA NA NA ADT V7.3.7.3 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Shielded Room 1. 3. The VCCI Site Registration No. is C-2040. Report No.: RF130511C01F Page No. 17 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. Note: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane Test Receiver EUT 40cm 80cm LISN Horizontal Ground Reference Plane Note: 1.Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF130511C01F Page No. 18 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

4.2.7 Test Results Worst-case data: 802.11g Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 9.84 36.20 22.50 46.04 32.34 66.00 56.00 -19.96 -23.66 2 0.16564 9.87 33.04 18.94 42.91 28.81 65.18 55.18 -22.27 -26.37 3 0.29506 9.92 26.59 20.06 36.51 29.98 60.38 50.38 -23.88 -20.41 4 0.55679 9.93 14.26 7.45 24.19 17.38 56.00 46.00 -31.81 -28.62 5 1.04148 10.03 10.41 4.51 20.44 14.54 56.00 46.00 -35.56 -31.46 6 7.33658 10.38 9.74 3.19 20.12 13.57 60.00 50.00 -39.88 -36.43 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF130511C01F Page No. 19 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 9.89 36.25 22.53 46.14 32.42 66.00 56.00 -19.86 -23.58 2 0.22429 10.03 23.86 12.99 33.89 23.02 62.66 52.66 -28.77 -29.64 3 0.29076 10.01 25.98 19.27 35.99 29.28 60.50 50.50 -24.51 -21.22 4 0.56055 10.00 11.51 4.53 21.51 14.53 56.00 46.00 -34.49 -31.47 5 1.02607 10.03 7.44 2.19 17.47 12.22 56.00 46.00 -38.53 -33.78 6 7.81751 10.50 10.01 4.41 20.51 14.91 60.00 50.00 -39.49 -35.09 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF130511C01F Page No. 20 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF130511C01F Page No. 21 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF130511C01F Page No. 22 / 22 Report Format Version: 6.1.1 Reference No.: 151030C10, 151229C06


Document Created: 2019-11-15 01:40:27
Document Modified: 2019-11-15 01:40:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC