RF Exposure Info (MPE).pdf

FCC ID: I88EMG2926Q10A

RF Exposure Info

Download: PDF
FCCID_2197030

RF EXPOSURE REPORT REPORT NO.: SA130511C01B MODEL NO.: EMG2926-Q10A FCC ID: I88EMG2926Q10A RECEIVED: May 09, 2013 TESTED: May 23, 2013 ~ Jun. 21, 2013 ISSUED: Feb. 14, 2014 APPLICANT: ZyXEL Communications Corporation ADDRESS: No. 6, Innovation Road II, Hsinchu Science Park No. 2, Gongye E. 9th Road, Hsinchu Science Park, Hsinchu Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA130511C01B 1 of 6 Report Format Version 5.0.0 Reference No.: 130511C01, 140206C03

TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................. 3 1. CERTIFICATION.......................................................................................................... 4 2. RF EXPOSURE ........................................................................................................... 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ..................................... 5 2.2 MPE CALCULATION FORMULA................................................................................. 5 2.3 CLASSIFICATION ....................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .............................. 6 Report No.: SA130511C01B 2 of 6 Report Format Version 5.0.0 Reference No.: 130511C01, 140206C03

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA130511C01B Original release Feb. 14, 2014 Report No.: SA130511C01B 3 of 6 Report Format Version 5.0.0 Reference No.: 130511C01, 140206C03

1. CERTIFICATION PRODUCT: Dual-Band Wirless AC/N Gigabit Ethernet Gateway MODEL NO.: EMG2926-Q10A BRAND: ZyXEL APPLICANT: ZyXEL Communications Corporation TESTED: May 23, 2013 ~ Jun. 21, 2013 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model: EMG2926-Q10A) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Feb. 14, 2014 Ivy Lin / Specialist APPROVED BY : , DATE : Feb. 14, 2014 Ken Liu / Senior Manager Report No.: SA130511C01B 4 of 6 Report Format Version 5.0.0 Reference No.: 130511C01, 140206C03

2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY ELECTRIC FIELD MAGNETIC FIELD POWER DENSITY AVERAGE TIME RANGE (MHz) STRENGTH (V/m) STRENGTH (A/m) (mW/cm2) (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 … … F/1500 30 1500-100,000 … … 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 23cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA130511C01B 5 of 6 Report Format Version 5.0.0 Reference No.: 130511C01, 140206C03

2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (dBm) (cm) (mW/cm2) (MHz) (dBi) (mW/cm2) 2412-2462 29.19 6.77 23 0.593 1 5180-5240 16.93 6.77 23 0.035 1 5745-5825 27.00 6.77 23 0.358 1 NOTE: Directional gain = 2dBi + 10log(3) = 6.77dBi CONCULSION: Both of the WLAN 2.4G & WLAN 5G can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density 1. WLAN 2.4G + WLAN 5.0G = 0.593 + 0.358 = 0.951 Therefore, the maximum calculation of this situation is 0.951, which is less than the “1” limit. ---END--- Report No.: SA130511C01B 6 of 6 Report Format Version 5.0.0 Reference No.: 130511C01, 140206C03


Document Created: 2019-11-21 16:37:53
Document Modified: 2019-11-21 16:37:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC