User Manual

FCC ID: I6H-318MK

Users Manual

Download: PDF
FCCID_3255268

DESCRIPTION COMPONENTS This digital keypad is a MegaCode series of wireless radio controls designed for use with automatic garage door and gate operators. The MegaCode radio format provides unparalleled security with more than a million WLKP different codes. In operation, the user enters their unique code on the unit’s keypad (1 to 6 digits long) and presses the button to activate the door operator. For up to 30 seconds after the last activation, the keypad can Digital Keypad be re-triggered by simply pressing the button again. This allows the user to stop or reverse the opener Operation Instructions quickly, without having to re-enter their code. The keypad has built-in keypad lighting for use at night or in dark areas. The clear silicone keys are backlit KEYPAD with a pleasing blue glow. By pressing the button first, before entering their code, the user can light up the keypad. Pressing the button twice at any time will light up the keypad. The keypad lockout timer will disable the keypad after 10 activations. The keypad must remain idle for 30 seconds before new attempts. MegaCode receivers are programmed by sending a signal from the user’s transmitters. This stores the transmitter’s code into the receiver’s memory. The receiver will retain its memory even without power and GTO Access Systems, LLC will only activate from these “memorized” transmitters. Each keypad code can be considered a different (850) 575-0176 transmitter. Each MegaCode receiver can remember a maximum of 10 transmitter codes. Any combination of USA & Canada (800) 543-4283 SCREW ANCHORS MOUNTING SCREWS www.gtoaccess.com portable transmitters and keypad codes up to the maximum number can be entered. KEYPAD FEATURES PROGRAMMING OPERATORS WALL MOUNTING 1 Refer to the instructions provided with the garage door opener MOUNT THE KEYPAD IN CLEAR VIEW OF THE to set it into “learn” mode. 1 HINGED COVER DOOR WITH THE TWO SCREWS SUPPLIED Press the opener’s LEARN BUTTON for 1 second and release. PRESS THE PROTECTS THE KEYPAD LEARN BUTTON TEN KEYS ENTERING 1-6 KEYPAD CODES The opener should BEEP and the LIGHT should BLINK once. USING NUMBERS OR LETTERS The RED LED will remain lit in Learn Mode for 15 seconds. SOFT BLUE LIGHTS ILLUMINATE 2 While the RED LED is lit, enter a 1-6 digit code into the THE RED LED WILL THE KEYS FOR NIGHTTIME USE GLOW FOR 15 SECONDS Use screw keypad. Then PRESS and HOLD the keypad’s key until anchors if the opener BEEPS and the light BLINKS once. required. LIGHT BUTTON TURNS THE BACKLIGHT ON AND OFF Repeat Steps 1 & 2 for any additional keypad codes. DELETING A KEYPAD CODE 2 ENTER A 1-6 DIGIT CODE WHILE RED LED IS ON BUTTON STAYS ACTIVE FOR 30 To delete a keypad code that you no longer want follow the SECONDS AFTER A CODE IS USED SO THE Slide battery cover open and remove batteries to same steps above. The opener will recognize the code and OPENER CAN BE STOPPED OR REVERSED access mounting hole. Replace batteries and slide delete it from memory. The RED LED and LIGHT will blink 4 battery cover closed after mounting. times to show the code was successfully deleted. KEYPAD OPERATION CHANGING BATTERIES LIMITED WARRANTY This product is warranted to the consumer against defects in material and workmanship for DAYTIME OPERATION LIGHT OPERATION one year from the date of purchase. This warranty applies to first retail buyers of new devices. 1 ENTER THE KEYPAD CODE Press the LIGHT ( ) Warrantor will repair, or at its option, replace, any device it finds that requires service under this button to turn backlight 1 SLIDE BATTERY 2 REMOVE THE OLD warranty, and will return the repaired or replaced device to the consumer at the warrantor’s cost. on and off. COVER OPEN BATTERIES AND For warranty service and shipping instructions contact warrantor at the address shown below. 2 PRESS DISPOSE OF THEM Devices must be sent to warrantor for service at owner’s expense. The remedies provided by PROPERLY this warranty are exclusive. Implied warranties under state law are to the one year period of this written warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In order to be protected by this warranty, save your 1-6 DIGIT KEYPAD CODE THAT proof of purchase and send copy with equipment should repair be required. This warranty gives WAS ENTERED INTO OPENER you specific legal rights, and you may also have other rights which vary from state to state. NIGHTTIME OPERATION 3 INSTALL 3 FRESH 4 SLIDE BATTERY All products returned for warranty service require a Return Product Authorization Number (RPA#). AAA BATERIES COVER CLOSED Contact Linear Technical Service at 1-800-543-1236 for an RPA# and other important details. 1 PRESS (LIGHTS KEYPAD) 2 ENTER THE KEYPAD CODE WARNING: Changes, modifications or adjustments not expressly approved by GTO Access Systems, LLC could void the user’s authority to operate this equipment. There Are No User 3 PRESS Serviceable Parts. NOTICE: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to Follow the steps in the diagram and use caution to keep batteries away from the following two conditions: (1) this device may not cause interference, and (2) this device must accept any children. interference, including interference that may cause undesired operation of the device. 1-6 DIGIT KEYPAD CODE THAT Replace old batteries with fresh AAA Alkaline batteries. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de WAS ENTERED INTO OPENER Properly dispose of old batteries. licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouil- Many electronic stores and supermarkets have battery recycling bins. lage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est NOTE: TO STOP OR REVERSE THE OPENER, THE BUTTON CAN BE PRESSED AGAIN FOR UP TO 30 SECONDS WITHOUT Alkaline batteries can be safely disposed of with normal household waste. susceptible d’en compromettre le fonctionnement. RE-ENTERING THE CODE. Never dispose of batteries in fire because they could explode. Printed in China for GTO Access Systems, LLC. Copyright© 2016 GTO Access Systems, LLC Document Number: 10014459 REV A (12-02-16)


Document Created: 2017-01-11 10:07:57
Document Modified: 2017-01-11 10:07:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC