Test Report

FCC ID: I4LGC30RX

Test Report

Download: PDF
FCCID_3671990

ksf. WH TeChnO[Ogy Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 In FCC 47 CFR PART 15 SUBPART C TEST REPORT FOR Force GC30 GAMING Controller Dongle Model : Force GC30 GAMING Controller Trade Name: msi Issued to MICRO—STAR INT‘ LCO., LTD. No.69, Lide St., Zhonghe Dist ., New Taipei City 235, Taiwan (R.O.C.) Issued by WH Technology Corp. Open Site No. 120, Ln. 5, Hudong St., Xizhi Dist., New Taipei City 221, Taiwan (R.0.C.) EMC Test Xizhi Office 12F.—3, No.27—1, Ln. 169, Kangning St., Xizhi Dist., Site and Lab New Taipei City 221, Taiwan (R.O.C.) Note: This test refers exclusively to the test presented test model and sample. This report shall not be reproduced exceptin full, without the written approval of WH Technology Corp. This document may be altered or revised by WH Technology Corp. Personnel only, and shall be noted in the revision section of the document Page 1/31

WH Technology Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 TABLE OF CONTENTS --------------------------------------------------------------------------------------------------- 2 1. GENERAL INFORMATION ---------------------------------------------------------------------------------------------------------- 3 1.1 DESCRIPTION OF THE TESTED SAMPLES -------------------------------------------------------------------------------------- 4 2. TEST METHODOLOGY -------------------------------------------------------------------------------------------------------------- 6 2.1 GENERAL TEST PROCEDURES ------------------------------------------------------------------------------------------ 6 2.2 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS ------------------------------------------------------ 7 2.3 DESCRIPTION OF TEST MODES ----------------------------------------------------------------------------------------- 8 2.4 DESCRIPTION OF THE SUPPORT EQUIPMENTS ------------------------------------------------------------------- 8 3. TEST AND MEASUREMENT EQUIPMENT ---------------------------------------------------------------------------------- 10 3.1 CALIBRATION --------------------------------------------------------------------------------------------------------------------- 10 3.2 EQUIPMENT ----------------------------------------------------------------------------------------------------------------------- 10 4. SECTION 15.249 REQUIREMENTS (FUNDAMENTAL/ HARMONICS) ----------------------------------------------- 12 4.1 TEST SETUP ---------------------------------------------------------------------------------------------------------------------- 12 4.2 LIMIT ------------------------------------------------------------------------------------------------------------------------------- 12 4.3 RESULT: PASSED ------------------------------------------------------------------------------------------------------------ 12 4.4 TEST DATA: ---------------------------------------------------------------------------------------------------------------------- 12 5. SECTION 15.205 REQUIREMENTS (BAND EDGE) ----------------------------------------------------------------------- 18 5.1 TEST SETUP ---------------------------------------------------------------------------------------------------------------------- 26 5.2 LIMIT ------------------------------------------------------------------------------------------------------------------------------- 26 5.3 RESULT: PASSED ------------------------------------------------------------------------------------------------------------ 19 5.4 TEST DATA: ---------------------------------------------------------------------------------------------------------------------- 27 6. SECTION 15.209 REQUIREMENTS (GENERAL RADIATED EMISSION) ------------------------------------------- 22 6.1 TEST SETUP ---------------------------------------------------------------------------------------------------------------------- 22 6.2 LIMIT ------------------------------------------------------------------------------------------------------------------------------- 23 6.3 TEST PROCEDURE -------------------------------------------------------------------------------------------------------------- 34 6.4 RESULT: PASSED -------------------------------------------------------------------------------------------------------------- 34 6.5 TEST DATA: ---------------------------------------------------------------------------------------------------------------------- 35 7. SECTION 15.207 REQUIREMENTS (POWERLINE CONDUCTED EMISSIONS) ---------------------------------- 28 APPENDIX 1 PHOTOS OF TEST CONFIGURATION APPENDIX 2 PHOTOS OF EUT Page 2/31

E«,’ WH TeChnO[Ogy Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 1. GENERAL INFORMATION Applicant MICRO—STAR INT‘ L CO., LTD. Address No.69, Lide St., Zhonghe Dist ., New Taipei City 235, Taiwan (R.0.C.) Manufacturer MICRO—STAR INT L CO., LTD. Address No.69, Lide St., Zhonghe Dist ., New Taipei City 235, Taiwan (R.0.C.) EUT Force GC30 GAMING Controller Dongle Model Name Force GC30 GAMING Controller Model N/A Differences is here with contirmed to comply with the requirements set out in the FCC Rules and Regulations Part 15 Subpart C and the measurement procedures were according to ANSI C63.4—2014. The said equipment in the configuration described in this report shows the maximum emission levels emanating from equipment are within the compliance requirements. FCC part 15 subpart C Receipt Date : 08/23/2017 Final Test Date : 10/17/2017 Tested By: Reviewed by: y \| hAi / || Y \ '\\//"‘, x Oct. 17, 2017 ')/ / Oct. 17, 2017 4 Date Sell WeEngineer Date Mike Lee / Manager Designation Number: TW1083 Page 331

WH Technology Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 1.1 DESCRIPTION OF THE TESTED SAMPLES EUT Name : Force GC30 GAMING Controller Dongle Model Number :: Force GC30 GAMING Controller FCCID Number I4LGC30TX Receipt Date : 10/17/2017 Input Voltage : 5 Vdc (From PC) Power From  Inside Outside Adaptor BATTERY AC Power Source DC Power Source Support Unit PC Operate Frequency : Refer to the channel list as described below Modulation Technique : GFSK Number of Channels : 63 Channel spacing : N/A  1 MHz Operating Mode : Simplex  Half Duplex Antenna Type : integral antenna: PCB Printing a dedicated antenna Antenna gain 0 dBi Page 4/31

WH Technology Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 Frequency Frequency Frequency Frequency Channel Channel Channel Channel (MHz) (MHz) (MHz) (MHz) 00 2412 20 2432 40 2452 60 2472 01 2413 21 2433 41 2453 61 2473 02 2414 22 2434 42 2454 62 2474 03 2415 23 2435 43 2455 63 2475 04 2416 24 2436 44 2456 --- --- 05 2417 25 2437 45 2457 --- --- 06 2418 26 2438 46 2458 --- --- 07 2419 27 2439 47 2459 --- --- 08 2420 28 2440 48 2460 --- --- 09 2421 29 2441 49 2461 --- --- 10 2422 30 2442 50 2462 --- --- 11 2423 31 2443 51 2463 --- --- 12 2424 32 2444 52 2464 --- --- 13 2425 33 2445 53 2465 --- --- 14 2426 34 2446 54 2466 --- --- 15 2427 35 2447 55 2467 --- --- 16 2428 36 2448 56 2468 --- --- 17 2429 37 2449 57 2469 --- --- 18 2430 38 2450 58 2470 --- --- 19 2431 39 2451 59 2471 --- --- Page 5/31

WH Technology Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 2. TEST METHODOLOGY All testing as described bellowed were performed in accordance with ANSI C63.4:2014 and FCC CFR 47 Part 15 Subpart C. 2.1 GENERAL TEST PROCEDURES Conducted Emissions The EUT is placed on a wood table, which is at 0.8 m above ground plane acceding to clause 15.207 and requirements of ANSI C63.4:2014. Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30MHz are using CISPR Quasi-Peak / Average detectors. Radiated Emissions The EUT is a placed on a turn table, which is 0.8 m above ground plane. The turntable was rotated through 360 degrees to determine the position of maximum emission level. The EUT is placed at 3m away from the receiving antenna, which varied from 1m to 4m to find out the highest emission. Each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. Page 6/31

WH Technology Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 2.2 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS (a) Except as shown in paragraph (d) of this section, only spurious emissions are permitted in any of the frequency bands listed below: MHz MHz MHz GHz 16.42 - 16.423 0.090 - 0.110 16.69475 - 399.9 - 410 4.5 - 5.15 10.495 - 0.505 16.69525 608 - 614 5.35 - 5.46 2.1735 - 2.1905 16.80425 - 960 - 1240 7.25 - 7.75 4.125 - 4.128 16.80475 1300 - 1427 8.025 - 8.5 4.17725 - 4.17775 25.5 - 25.67 1435 - 1626.5 9.0 - 9.2 4.20725 - 4.20775 37.5 - 38.25 1645.5 - 1646.5 9.3 - 9.5 6.215 - 6.218 73 - 74.6 1660 - 1710 10.6 - 12.7 6.26775 - 6.26825 74.8 - 75.2 1718.8 - 1722.2 13.25 - 13.4 6.31175 - 6.31225 108 - 121.94 2200 - 2300 14.47 - 14.5 8.291 - 8.294 123 - 138 2310 - 2390 15.35 - 16.2 8.362 - 8.366 149.9 - 150.05 2483.5 - 2500 17.7 - 21.4 8.37625 - 8.38675 156.52475 - 2655 - 2900 22.01 - 23.12 8.41425 - 8.41475 156.52525 3260 - 3267 23.6 - 24.0 12.29 - 12.293 156.7 - 156.9 3332 - 3339 31.2 - 31.8 12.51975 - 12.52025 162.0125 - 167.17 3345.8 - 3358 36.43 - 236.5 12.57675 - 12.57725 167.72 - 173.2 3600 - 4400 () 13.36 - 13.41 240 - 285 322 - 335.4 1 Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz. 2 Above 38.6 (b) Except as provided in paragraphs (d) and (e), the field strength of emissions appearing within these frequency bands shall not exceed the limits shown in Section 15.209. At frequencies equal to or less than 1000 MHz, compliance with the limits in Section 15.209 shall be demonstrated using measurement instrumentation employing a CISPR quasi-peak detector. Above 1000 MHz, compliance with the emission limits in Section 15.209 shall be demonstrated based on the average value of the measured emissions. The provisions in Section 15.35 apply to these measurements. 2.3 DESCRIPTION OF TEST MODES The EUT was tested under following modes: Modes: 1. Continuous transmitting Channels: 1. 2.412 GHz (Lowest Channel) 2. 2.440 GHz (Middle Channel) 3. 2.475 GHz (Highest Channel) Page 7/31

WH Technology Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 2.4 DESCRIPTION OF THE SUPPORT EQUIPMENTS Setup Diagram See test photographs attached in appendix 1 for the actual connections between EUT and support equipment. EUT Page 8/31

WH Technology Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 Support Equipment Peripherals Devices: OUTSIDE SUPPORT EQUIPMENT Serial FCC ID/ Trade Power No. Equipment Model Data Cable No. BSMI ID name Cord 1. N/A N/A N/A N/A N/A N/A N/A INSIDE SUPPORT EQUIPMENT Serial FCC ID/ Trade Power No. Equipment Model Data Cable No. BSMI ID name Cord 1. N/A N/A N/A N/A N/A N/A N/A Note: All the above equipment /cable were placed in worse case position to maximize emission signals during emission test Grounding: Grounding was in accordance with the manufacturer’s requirement and conditions for the intended use. Page 9/31

ksf. WH TeChnO[Ogy Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 In 3. TEST AND MEASUREMENT EQUIPMENT 3.1 CALIBRATION The measuring equipment utilized to perform the tests documented in the report has been calibrated once a year or in accordance with the manufacturer‘s recommendations, and is traceable to recognized national standards. 3.2 EQUIPMENT The following list contains measurement equipment used for testing. The equipment conforms to the requirement of CISPR 16—1, ANSI C€63.2 and. Other required standards. Calibration of all test and measurement, including any accessories that may effect such calibration, is checked frequently to ensure the accuracy. Adjustments are made and correction factors are applied in accordance with the instructions contained in the respective. Table 1 List of Test and Measurement Equipment Test Site Instrument Manufacturer Mode! No. S/N Nes;t(;a\. Spectrum (9K_3GHS) R&s FSP3 Ba3387/01 o 2018/00720 EMI Receiver neas EsH810 880228!00 2o18/06706 . Rolf Heine Conduction LISN Hochirequenztech NNB—2/16z 98062 2018/06/11 rik ISN Schwarzbeck 8—Wire IsN CAts °4198158 sor8/0021 RF Cable N/A N/A EME3 201709 Bilog BLBIGMO antenna(GOM— ETC MCTD2786B 40040B—5— 201805718 1G) 004 Double Ridged Guide Horn DRHILSNO antenna(16.18 ETC MCTD 1209 2005 201711723 G) I"(‘;;"Ga‘;‘gg‘;a com—power AH—826 81000 2018/08/16 Rediation LooP Antenna com—power AL—130 17117 2018/10/04 (Below 30M) PreBomio) amplifier EMC INSTRUNMENT EMCO135 sso334 2018/05/03 Microwave Emc 9801064A Preamplifier (o—so) INSTRUMENT EMCOS1845 T —i8001 2017710723 Pre amplifier MiTEQ Js4—18002600—30— sog320 2018/08/09 Page 10/31

WH Technology Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 (18G~26G) 5A EMI Test ESVS30 R&S 826006/002 2017/11/28 Receiver (20M-1000MHz) RF Cable N male on end of EMCI 30m 2017/10/19 (open site) both sides (EMI4) RF CABLE HARBOUT LL142MI(4M+4M) NA 2018/04/17 (1~26G) INDUSTRIES RF CABLE HARBOUR LL142MI(7M) NA 2018/08/09 (1~26G) INDUSTRIES Spectrum R&S FSP7 830180/006 2018/04/14 (9K--7GHz) Spectrum AGILENT 8564EC 4046A0032 2018/03/01 (9K--40GHz) Software e3 AUDIX N/A N/A N/A SINGAL 3619U0042 SG GENTERATOR HP 8648A N/A (100k-1GHz) 6  CALIBRATION INTERVAL OF INSTRUMENTS LISTED ABOVE IS ONE YEAR Page 11/31

WH Technology Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 4. SECTION 15.249 REQUIREMENTS (FUNDAMENTAL/ HARMONICS) 4.1 TEST SETUP Refer to paragraph 6.1. 4.2 LIMIT Field Strength Fundamental of Fundamental Detector Frequency (MHz) (dBµV/m at 3-meter) 902 - 928 2400 – 2483 114 Peak 5725 - 5875 902 - 928 2400 – 2483 94 AV 5725 - 5875 Field Strength Fundamental of Harmonics Detector Frequency (MHz) (dBµV/m at 3-meter) 902 - 928 2400 – 2483 74 Peak 5725 - 5875 902 - 928 2400 – 2483 54 AV 5725 - 5875 4.3 RESULT: PASSED 4.4 TEST DATA: Page 12/31

& ‘b WH TeChnO[Ogy Corp. Date of Issue: Oct. 17, 2017 l". Report No: F17082302 In Fundamental Power : DG 5V Pol/Phase : HORIZONTAL TX—LO 2412—MI 2440—HI Test Mode 1 : Temperature : 33 °C 2475MHz Memo : Humidity : 64 % 1 20Level (dBuVim) Date: 2017—09—28 2400—2483.5MHZ(PEAK) 110 2400—2483.5NMHZ(AVG) 90 1 2 3 70 so 30 10 2395 2412.7 24304 2448.1 2405.8 2483.5 Frequency (MHz) Remarks: : 1.Result=Read Value+Factor : 2.Factor=Antenna Factor+Cable loss— : Amplifier Factor Read Limit Over Freq Level Factor Level Line Limit Remark MHz dBuV dB/m dBuV/m dBu¥/m dB 1 @ 2412.000 101.36 —14.00 87.36 114.00 —26.64 Peak 2 2440.000 101.05 —13.93 87.12 114.00 —26.88 Peak 3 2475.000 100.79 —13.85 86.94 114.00 —27.06 Peak Page 13/31

& ‘b WH TeChnO[Ogy Corp. Date of Issue: Oct. 17, 2017 l". Report No: F17082302 In Power : DC 5V PolfPhase : VERTICAL .| TX—LO_2412—MI 2440—HI . — Test Mode 1 "| PA75MHz Temperature :| 33 °C Memo : Humidity : 64 % .30 Level(BuVim) Date: 2017—09—28 2400—2483.5MHZIPEAK) «10 2400—2483.5MHZ(AVG) so 1 2 3 zo so 30 10 2305 24127 24304 24481 2405.8 2835 Frequency (MHz) Remarks: : 1.Result=Read Value+Factor : 2.Factor=Antenna Factor+Cable loss— : Amplifier Factor Read Limit Over Freq Level Factor Level Line Limit Remark MHz dBuV dB/m dBuV/m dBuV/m dB 1 @ 2412.000 103.54 —14.00 89.54 114.00 —24.46 Peak 2 2440.000 102.51 —13.93 88.58 114.00 —25.42 Peak 3 2475.000 101.56 —13.85 87.71 114.00 —26.29 Peak Page 14/31

& ‘b WH TeChnO[Ogy Corp. Date of Issue: Oct. 17, 2017 l". Report No: F17082302 In Harmonics Power : DG 5V Pol/Phase : HORIZONTAL . TX—LO 2412—MI 2440—HI . — Test Mode 1 5| 2A75MHz Temperature : 33 °C Memo : Humidity : 64 % 39 Level(dBuVim) Date: 2017—09—28 CLASS.8 To 60 CLASS—8 (AVG) 50 3 40 30 20 10 1000 6000. 11000. 16000. 21000. 26000 Frequency (MHz) Remarks: : 1.Result=Read Value+Factor : 2.Factor=Antenna Factor+Cable loss— : Amplifier Factor Read Limit Over Freq Level Factor Level Line Limit Remark MHz dBuV dB/m dBuV/m dBuV/m dB 1 @ 4824.000 55.28 —6.32 48.96 74.00 —25.04 Peak 2 4880.000 54.91 —6.17 48.74 74.00 —25.26 Peak 3 4950.000 54.28 —5.97 48.31 74.00 —25.69 Peak Page 15/31

‘ & l,,. WH Technology Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 In Power : DC 5V PolfPhase : VERTICAL Test Mode 1 : -22(7;8”_'341 2—M1_ 2440—HI Temperature :| 83 °C Memo : Humidity : 64 % soLeveI (dBuVim) Date: 2017—09—28 CLASS—8 zol so CLASS—8 (AVG) B so 40 30 20 10 1000 000. 11000. 16000 21000. 26000 Frequency (MHz) Remarks: : 1.Result=Read Value+Factor : 2.Factor=Antenna Factor+Cable loss— : Amplifier Factor Read Limit Over Freq Level Factor Level Line Limit Remark ______MHz dBuV dB/m dBuV/m dBuV/m _dB _ 1 @ 4824.000 57.02 —6.32 50.70 74.00 —23.30 Peak 2 4880.000 56.69 —6.17 50.52 74.00 —23.48 Peak 3 4950.000 56.09 —5.97 50.12 74.00 —23.88 Peak Page 16/31

WH Technology Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 Note: 1. Emission level = Reading level + Correction factor 2. Correction factor : Antenna factor, Cable loss, Pre-Amp, etc. 3. All emissions as described above were determining by rotating the EUT through three orthogonal axes to maximizing the emissions if the EUT belongs to hand-held or body-worn devices. 4. Measurements above 1000 MHz, Peak detector setting: use a 1 MHz RBW, a 3 MHz VBW. 5. Measurements above 1000 MHz, Average detector setting: 1 MHz RBW with 10 Hz VBW 6. Peak detector measurement data will represent the worst case results. 7. “---” denotes the data which is not available. Page 17/31

WH Technology Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 5. SECTION 15.205 REQUIREMENTS (BAND EDGE) 5.1 TEST SETUP Refer to paragraph 6.1. 5.2 LIMIT Restricted Bands: Operation within the bands: 902 - 928 MHz, 2400 - 2483.5 MHz, 5725 - 5875 MHz, and 24.0 - 24.25 GHz. Field Strength Field Strength Frequency (Hz) (µV/m at 3-meter) (dBµV/m at 3-meter) 1.705-30 30 (at 30-meter) 49.5 30-88 100 40 88-216 150 43 216-960 200 46 Above 960 500 54 Page 18/31

‘ & l,,. WH Technology Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 In 5.3 RESULT: PASSED 54 TEST DATA: Power : DC 5V Pol/Phase : HORIZONTAL Test Mode 1 : CGH LO & HI —Restricted Bands Temperature : 83 °C Memo : Humidity : 64 % aole\tel (dBuVim) Date: 2017—09—28 class.8 zol 60| cLass.8 (avG) EJ 1 2 40 EJ 20| 10 2300 2350. 2400. 2450. 2500. 2550 Frequency (MHz) Remarks: : 1.Result=Read Value+Factor : 2.Factor=Antenna Factor+Cable loss— : Amplifier Factor Read Limit _Over Freq Level Factor Level Line Limit Remark ““““MHz _dBuV dB/m dBuV/m dBuV/m dB _ 1 @ 2375.800 56.42 —14.08 42.34 74.00 —31.66 Peak 2 2503.500 55.90 —13.78 42.12 74.00 —31.88 Peak Page 1931

& ‘b WH TeChnO[Ogy Corp. Date of Issue: Oct. 17, 2017 l". Report No: F17082302 In Power : DC 5V Pol/Phase : VERTICAL Test Mode 1 : CH LO & HI —Restricted Bands Temperature :| 33 °C Memo : Humidity : 64 % so Level (dBuVim) Date: 2017—09—28 CLASS—8 70 60 CLASS—8 (AVG) 50 1 2 40 30 20 10 2300 2350. 2400. 2450. 2500. 2550 Frequency (MHz) Remarks: : 1.Result=Read Value+Factor : 2.Factor=Antenna Factor+Cable loss— : Amplifier Factor Read Limit Over Freq Level Factor Level Line Limit Remark MHz dBuV dB/m dBuV/m dBuV/m dB 1 2381.200 57.64 —14.07 43.57 74.00 —30.43 Peak 2 @ 2507.100 57.62 —13.78 43.84 74.00 —30.16 Peak Page 20/31

WH Technology Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 Note: 1. Emission level = Reading level + Correction factor 2. Correction factor : Antenna factor, Cable loss, Pre-Amp, etc. 3. All emissions as described above were determining by rotating the EUT through three orthogonal axes to maximizing the emissions if the EUT belongs to hand-held or body-worn devices. 4. Measurements above 1000 MHz, Peak detector setting: use a 1 MHz RBW, a 3 MHz VBW. 5. Measurements above 1000 MHz, Average detector setting: 1 MHz RBW with 10 Hz VBW. 6. Peak detector measurement data will represent the worst case results. Page 21/31

WH Technology Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 6. SECTION 15.209 REQUIREMENTS (GENERAL RADIATED EMISSION) 6.1 TEST SETUP 1-4M EUT Load Antenna and Active turntable distance: 3 m. Non-Conductive 80 cm Table Metal Full Soldered Ground Plane Remote Controller Printer Control PC Spectrum Page 22/31

WH Technology Corp. Date of Issue: Oct. 17, 2017 Report No: F17082302 6.2 LIMIT The field strength of any emissions which appear outside of this band shall not exceed the general radiated emission limits in section 15.209 as below. Frequency (MHz) Field Strength (mV/m) Measurement Distance (m) 1.705-30 30 30 30-88 100* 3 88-216 150* 3 216-960 200* 3 Above 960 500* 3 *Except as provided in paragraph (g), fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54-72 MHz, 76-88 MHz, 174-216 MHz or 470-806 MHz. However, operation within these frequency bands is permitted under other sections of this Part, e.g., Sections 15.231 and 15.241. In the above emission table, the tighter limit applies at the band edges. Field Strength Field Strength Frequency (Hz) (µV/m at 3-meter) (dBµV/m at 3-meter) 1.705-30 30 (at 30-meter) 49.5 30-88 100 40 88-216 150 43 216-960 200 46 Above 960 500 54 Page 23/31

WH Technology Corp. Date of Issue: JAN. 09, 2014 Report No: F13121306 6.3 TEST PROCEDURE 1. The EUT was placed on a turntable, which was 0.8m above ground plane. 2. The turntable was rotated for 360 degrees to determine the position of maximum emission level. 3. EUT was set at 3m away from the receiving antenna, which was varied from 1m to 4m to find out the highest emissions. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5. And also, each emission was maximized by changing the polarization of receiving antenna, both horizontal and vertical. 6. Repeated above procedures until the measurements for all frequencies are completed. 6.4 RESULT: PASSED Page24/31

& ‘() WH Techno[ogy COFp. Date of Issue: JAN.09, 2014 ky. Report No: F13121306 n 6.5 TEST DATA: All frequencies not described in this test report and within the range of the general radiated emission limits are not detectable significantly. The table as below is representing worst emissions found. Power : DG 5V Pol/Phase : HORIZONTAL Test Mode 1 : TX 2402MHz Temperature : 33 °C Memo : Humidity : 64 % so Level (dBu¥im) Date: 2017—09—28 zo 60 FcC class 8 50) 40‘] a 1 209 5 6 30 20 10 30 224. a18. 612. 806. 1000 Frequency (MHz) Remarks: : 1.Result=Read Value+Factor : 2.Factor=Antenna Factor+Cable loss— : Amplifier Factor Read Limit Over Freq Level Factor Level Line Limit Remark MHz dBu¥ dB/m dBuV/m dBuV/m dB 455.830 46.25 —10.20 36.05 46.00 —9.95 QP o un & uo bo 551.860 44.38 —8.77 35.61 46.00 —10.39 QP 598.420 43.38 —8.76 34.62 46.00 —11.38 QP 771.080 44.30 —5.82 38.48 46.00 —7.52 QP ® 861.290 39.41 —4.04 35.37 46.00 —10.63 QP 985.450 37.08 —1.38 35.70 54.00 —18.30 QP Page25/31

naesissue: san.o9, 2014 5’0 WH Technology Corp. Report No: F13121306 Power : DG 5V Pol/Phase : VERTICAL Test Mode 1 : TX 2402MHz Temperature : 33 °C Memo : Humidity : 64 % se Level (dBuVim} Date: 2017—09—28 70 60 rccclass8 50 40 3 m 6 q * 4 5 30 20 10 30 224. 418. 612. 806. 1000 Frequency (MHz) Remarks: : 1.Result=Read Value+Factor : 2.Factor=Antenna Factor+Cable loss— : Amplifier Factor Read Limit Over Freq Level Factor Level Line Limit Remark MHz _dBuV dB/m dBuV/m dBuV/m dB 42.610 47.174 —17.99 29.75 40.00 —10.25 QP 551.860 42.27 —8.177 33.50 46.00 —12.50 QP @ 598.420 44.98 —8.16 36.22 46.00 —9.78 QP 771.080 37.40 —5.82 31.58 46.00 —14.42 QP 867.110 35.75 —4.04 31.71 46.00 —14.29 QP 932.100 36.45 —2.40 34.05 46.00 —11.95 QP Page26/31

WH Technology Corp. Date of Issue: JAN. 09, 2014 Report No: F13121306 Note: 1. Emission level = Reading level + Correction factor 2. Correction factor : Antenna factor, Cable loss, Pre-Amp, etc. 3. All emissions as described above were determining by rotating the EUT through three orthogonal axes to maximizing the emissions if the EUT belongs to hand-held or body-worn devices. 4. Measurements from 9 kHz to 150 kHz, Peak detector setting: 100 Hz RBW 5. Measurements from 150 kHz to 30MHz, Peak detector setting: 10 kHz RBW 6. Measurements from 30 MHz to 1000 MHz, Peak detector setting: 100 kHz RBW 7. Measurements from 9 kHz to 150 kHz, CISPR Quasi-Peak detector: 200 Hz RBW 8. Measurements from 150 kHz to 30MHz, CISPR Quasi-Peak detector: 9 kHz RBW 9. Measurements from 30 MHz to 1000 MHz, CISPR Quasi-Peak detector: 120 kHz RBW 10. Peak detector measurement data will represent the worst case results. Page27/31

WH Technology Corp. Date of Issue: JAN. 09, 2014 Report No: F13121306 7. SECTION 15.207 REQUIREMENTS (POWERLINE CONDUCTED EMISSIONS) 7.1 TEST SETUP VCP Receiver EUT Load 80cm Non-Conductive Table LISN LISN HCP 7.2 LIMIT CLASS B Frequency range QP Average (MHz) dB(uV) dB(uV) 0.15-0.5 66 - 56 dBuV 56 - 46 dBuV 0.5-5.0 56 dBuV 46 dBuV 5.0-30.0 60 dBuV 50 dBuV Remark: In the above table, the tighter limit applies at the band edges. 7.3 TEST PROCEDURE The EUT and simulators are connected to the main power through a line impedance stabilization network (LISN). It provides a 50 ohm / 50 H coupling impedance for the measuring equipment. The peripheral devices are also connected to the main power through a LISN that provides a 50 ohm / 50 H coupling impedance with 50 ohm termination. (Please refer to the block diagram of the test setup and photograph.) Both sides of AC line are checked for the maximum conducted emission interference. In order to find the maximum emissions, the relating positions of equipment and all of the interference cables must be changed according to EN 55022 regulations: The measurement procedure on conducted emission interference. The resolution bandwidth of the field strength meter is set at 9 KHz. Page28/31

WH Technology Corp. Date of Issue: JAN. 09, 2014 Report No: F13121306 7.4 TEST SPECIFICATION According to PART15.207 7.5 RESULT: PASSED EMI Receiver/Spectrum Analyzer Configuration (for the frequencies tested) Frequency Range: 150KHz--30MHz Detector Function: Quasi-Peak / Average Mode Resolution Bandwidth: 9KHz 7.6 TEST DATA: Page29/31

WH Techno[ogy COFp. Date of Issue: JAN.09, 2014 . Report No: F13121306 B Power DC 5V Pol/Phase : LINE Test Mode 1 : TX 2402 MHz Temperature : 25.1 °C Memo Humidity :| 42% 5o Level (dBuy) Date: 2017—09—04 70 60 CLASS—8 AV 50 40 30 20 10 0.150.2 0.5 1 2 5 10 20 30 Frequency (MHz) Remarks: : Factor=Insertion loss+Cable loss Read Over Limit Freq Level Level Factor Limit Line Rerark MHz dBu¥ dBu¥ dB dB dBu¥ 1 0.15 40.94 51.06 10.12 —14.85 65.91 Peak 2 0.22 39.83 49.94 10.11 —12.85 62.79 Peak 3 0.44 34.62 44.76 10.14 —12.22 56.98 Peak 4 @ 0.68 35.03 45.18 10.15 —10.82 56.00 Peak 5 5.96 29.82 40.17 10.35 —19.83 60.00 Peak 6 16.40 32.84 43.42 10.58 —16.58 60.00 Peak Page30/31

WH Techno[ogy COFp. Date of Issue: JAN.09, 2014 . Report No: F13121306 B Power :| DC 5V Pol/Phase NEUTRAL Test Mode 1 :| TX 2402MHz Temperature 25.1 °C Memo Humidity 42 % soLeqe{ (dBuV) Date: 2017—09.04 70 CLASS—B OP 60 CLASS—B AV 50 20 10 0.150.2 0.5 1 2 5 10 20 30 Frequency (MHz) Remarks: : Factor=Insertion loss+Cable loss Read Over Limit Freq Level Level Factor Limit Line Remark MHz dBu¥ dBu¥ dB dB dBu¥ 1 0.15 40.96 51.15 10.19 —14.81 65.96 Peak 2 @ 0.30 38.85 49.06 10.21 —11.18 60.24 Peak 4 0.68 33.97 44.21 10.24 —11.79 56.00 Peak 4 1.34 30.25 40.53 10.28 —15.47 56.00 Peak 5 5.96 29.50 39.99 10.49 —20.01 60.00 Peak 6 16.49 34.35 45.07 10.72 —14.93 60.00 Peak Page31/31


Document Created: 2017-11-28 15:58:32
Document Modified: 2017-11-28 15:58:32
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC