Users Manual

FCC ID: I4L-MS6967

Users Manual

Download: PDF
FCCID_264607

Edition Package 2 March 2002 1. INTRODUCTION Copyright Notice 1.1 MSI™ PC2PC Bluetooth The material in this document is the intellectual property of MSI™ PC2PC Bluetooth provides wireless technology MICRO-STAR INTERNATIONAL. We take every care in that revolutionizes personal connectivity. It is the solution for Transceiving Dipole Cable User’s the preparation of this document, but no guarantee is given as Module Antenna (Optional) Guide the seamless integration of Bluetooth technology into personal to the correctness of its contents. Our products are under con- tinual improvement and we reserve the right to make changes computers, enabling short-range wireless connections between without notice. desktop/laptop computers, Bluetooth-enabled peripherals 2.2 Hardware Specifications (printers, faxes,...), portable handheld devices, and connec- Trademarks tivity to the Internet. Bluetooth Transceiving Key All trademarks are the properties of their respective owners. Bluetooth Transceiving Module 1.2 Bluetooth Technology General H/W Interface USB Revision History Bluetooth Spec. Ver. 1.1 The term “Bluetooth” refers to a worldwide standard Version Revision History P/N Date Compliance V1.0 First release G52-MA00592 March 2002 for the wireless exchange of data between two devices. In or- Throughput About 723Kbps (data channels) der to exchange data, two Bluetooth devices must establish a Operating Volt. 5V from USB interface connection. Before a connection is established, one device must Operating Range Up to 200M for open space Regulatory FCC, CE, BQB (Bluetooth Qualified) request a connection with another. The second device accepts Approval (or rejects) the connection. Temperature Storage temp: -20oC~+100oC Operating temp: -20oC~+100oC The originator of the request is known as the client. The Radio Spread Spectrum Frequency Hopping Spread Spectrum (FHSS) device that accepts (or rejects) the request is known as the Compliant with FCC part 15 server. Many Bluetooth devices can act as both client and Frequency Range 2.4~2.4835GHz (2.4GHz ISM Band) FCC-B Radio Frequency Interference Statement server. RF Channels 79-channel system for USA, Japan, and Europe This equipment has been tested and found to comply with the (except France, 23-channel system for France) A client Bluetooth device runs a software program that Modulation GFSK, BT=0.5 limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable requests a connection to another device as part of its normal Output Power Class Bluetooth Power Class 1 protection against harmful interference when the equipment operation. For example, the program may request a connec- Output Power +18dBm (Max.) is operated in a commercial environment. This equipment tion to a remote computer, a printer, or a modem. Becoming a Receiver Sensitivity Better than -90dBm with BER < 0.1% generates, uses and can radiate radio frequency energy and, if Max Input Level -20dBm not installed and used in accordance with the instruction Bluetooth client normally requires an action by the device Power Control Yes manual, may cause harmful interference to radio operator, such as an attempt to browse a remote computer, Base Band communications. Operation of this equipment in a residential print a file, or dial out on a modem. area is likely to cause harmful interference, in which case the Physical Links Support ACL link user will be required to correct the interference at his own Every Bluetooth device that provides a service must be Network Capabilities Support piconet point-to-point and point-to- expense. multipoint connections (Scatternet to be sup- prepared to respond to a connection request. Bluetooth soft- ported soon) ware is always running in the background on the server, ready Link Manager Notice 1 The changes or modifications not expressly approved by the to respond to connection requests. 3-slot Packets Yes party responsible for compliance could void the user’s authority 5-slot Packets Yes to operate the equipment. Slot Offset Yes Notice 2 2. HARDWARE SETUP Timing Accuracy Yes Switch Yes Shielded interface cables and A.C. power cord, if any, must 2.1 Package Checkup Hold Mode Yes be used in order to comply with the emission limits. Unpack the package and inspect all the items carefully. Sniff Mode Yes VOIR LA NOTICE D’INSTALLATION AVANT DE Test Mode Yes If any of the items is damaged or missing, please contact your RACCORDER AU RESEAU. Park Mode Yes local dealer as soon as possible. Also, keep the box and pack- RSSI Yes ing materials at hand, in case you need to ship the unit in the Power Control Yes future. Your package content may vary depending on the items Authentication Yes Micro-Star International PC2PC Bluetooth purchased. It can be package 1, package 2, or the combina- Encryption Yes tion of both as listed below: Software Tested to comply System Support Windows® 2000/ME/98/XP with FCC Standard Package 1 Profile Support Generic Access Profile/ Service Discovery Pro file/ Serial Port Profile/ Dial-Up Networking For Home or Office Use Profile/ Fax Profile/ LAN Access Profile/ Ge- neric Object Exchange Profile/ File Transfer Profile/ Object Push Profile/ Synchronization Profile Transceiving USB Cable Software User’s Key (Optional) CD Guide

2.3 Hardware Installation To integrate the PC2PC Bluetooth into your system, 5. please follow the instructions below: 1. Uncap the transceiving key. 6. For mainboards with bluetooth pinheaders located elsewhere (not near the PCI slots), ex: MS-6380E, use the linking cable to secure the identical connector on the transceiving module to the bluetooth pinheader on the mainboard. Then, fasten the transceiving module to the mainboard with a bracket screw. 3. Remove the computer case. 2. Plug the transceiving key to an available USB port of the tar- get device with which you wish to establish a wireless bluetooth connection. The target device can be a desktop PC, a laptop PC, or any other types of PCs with Windows® OS & USB ports. Avoid installing the transceiving module and the transceiving key into the same PC. “Bluetooth” refers to a worldwide standard for the wireless exchange of services be- tween two devices. In order to exchange services, two Bluetooth Install and screw up the computer case. devices must establish a connection. Bluetooth function will not work if the transceiving module & the transceiving key 4. are installed into the same device. 1 1 5 V Install the transceiving module onto your mainboard. Proce- dures may differ depending on the location of the bluetooth Note 1: The transceiving key and the pinheader on the mainboard. Please refer to the following: transceiving module bracket both integrate one Green (Blue) LED & one Red LED. The Green (Blue) LED indicates the connection status. The Red LED indicates the power state. ANT Note 2: As the bluetooth pinheader shares the USB interface with blue-colored USB2.0 connector on the mainboard, utilization of PC2PC Bluetooth will disable the bottommost ANT USB2.0 port. Locate the antenna connector on the transceiving module For mainboards with bluetooth pinheaders located near the bracket at the back panel of the computer case. Secure the PCI slots, ex: MS-6398E, secure the connector on the lower dipole antenna to this connector and fix the antenna to a loca- part of the transceiving module directly onto the bluetooth tion free from signal obstruction. Concrete walls, metal pinheader. Then, fasten the transceiving module to the substances, paints with metal composites,... etc. will cause sig- mainboard with a bracket screw. nal obstruction and disable the bluetooth function.

3. SOFTWARE SETUP Followingly, select “Skip driver installation of this device...” and click Finish. 3. To make sure that the hardware & software have been successfully installed, go to Control Panel after restarting your system. Double-click System and click the Device Manager 3.1 Driver/Software Installation tab. If the hardware & software installation is complete, the To activate the Bluetooth service, driver/software instal- MSI USB Bluetooth Device should appear. lation is required for both the server end and the client end. Driver/software installation procedures may vary depending on the Bluetooth hardware installed. For the end with transceiving key, please follow the overall instructions start- ing from Step 1. For the end with transceiving module, please go directly to Step 2. 1. Plug the transceiving key into an available USB port of the target device. The following screen appears, indicating the detection of new hardware device by the system. Click 2. Insert the MSI software CD. The auto-run option will start and the following dialog box appears. Click the MSI Next to proceed. Bluetooth Software button to start Bluetooth software installation. 3.2 Basic Operations After software installation, My Bluetooth Places icon will be shown on the desktop. Double- click the icon and the following window appears. The following dialog box appears. Select “Search for a suitable driver for my device (recommended).” Click Next to continue and follow the on-screen instruc- tions to install the application program. 1. To enable Bluetooth services, you must at first set up a new Bluetooth connection with another device. The connec- tion is not actually established; instead, a shortcut is placed in the right pane of My Bluetooth Places. To use the connection, double-click the shortcut. Set up a new connection 1. Click Add Bluetooth Connection In the next dialog box, clear all the check boxes and click icon on the main screen. Next. 2. On the first Connection Wizard screen: After the system finishes installing the software, click Yes to reboot your system. a) In the Select a Service drop-down menu, select the

type of connection that will be established. (The spe- less connection between two devices. The connection cific service will be selected later, if necessary.) may be used by applications as though a physical se- b) In the “Select a device that provides the service” rial cable connected the devices. drop-down menu, select the device that will pro- *Dial-up Networking—allows a Bluetooth client to vide the service. (To update the list of devices use a modem that is physically attached to the displayed, click the Search Devices… button.) Bluetooth server. c) Optional: select the “Require secure encrypted con- *Fax—allows a Bluetooth client to wirelessly send a nection” option to enable Authentication and fax using a device that is physically attached to the Encryption for this connection. Bluetooth server. 3. Click the Next button: *File Transfer—establishes a Bluetooth wireless con- * If more than one service of the type selected in the nection that allows your computer to perform file sys- Select a Service drop-down menu (above) exists on tem operations on another Bluetooth-enabled device— the selected device, for example, multiple Bluetooth browse, drag/drop, open, print, cut/copy, paste, delete, Serial Ports, then the Select Bluetooth Service dialog rename, etc. box appears. Select the specific service to be used, *Information Exchange—establishes a Bluetooth and then click the OK button to close the Select wireless connection between two devices so that they Bluetooth Service dialog box. can exchange personal information manager data * If only one service of the type selected in the Select such as business cards, calendar items, email a Service drop-down menu (above) exists on the se- messages, and notes. lected device, the next Connection Wizard screen appears. *Information Synchronization—establishes a Bluetooth wireless connection between two devices 4. If “Require secure encrypted connection” was selected and uses the connection to synchronize Personal In- above, a security screen may appear: formation Manager data between the two devices. *To establish a paired relationship with the remote *Network Access—establishes a Bluetooth wireless device while using this wizard, enter your Personal connection between the client and a server that is Identification Number in the PIN Code field of the physically connected to the Local Area Network. If security screen, and then click the Next button. the client has permission (user name and password *To establish the paired relationship with the remote for the LAN), the wireless connection can be used as device the first time this connection is used, leave if the client were hardwired to the LAN. the PIN Code field blank in the security screen, and click the Next button. The Security screen WILL NOT All Bluetooth servers do not necessarily provide all of appear if the devices have been paired. these services. For example, network gateways only provide access to the Local Area Network (the Network Access service). 5. On the last Connection Wizard screen: * The top of the screen provides basic information For advanced operations of the Bluetooth software, about the new connection—the name of the device please double-click My Bluetooth Places icon on your that will provide the service and the name of the desktop, open the Help menu on the menu bar, and service that will be provided. If this information is click Help Topics. Detailed instructions for advanced NOT correct, click the Back button to return to the applications are displayed as follows: previous screen, and from that screen select the cor- rect service and device. * In the “Connection Name:” field, enter a descrip- tive name for the connection, for example, “Bluetooth Serial Connection to MSI Desktop.” 2. After a connection has been established, right-click the device in connection and select Discover Available Services from the pop-up menu to determine the services provided by this device. The services supported are: *Bluetooth Serial Port—establishes a Bluetooth wire


Document Created: 2002-05-27 10:31:04
Document Modified: 2002-05-27 10:31:04
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC