operational description

FCC ID: I4L-MS6837D

Operational Description

Download: PDF
FCCID_647745

Report No. 063L105-RF-US-P06V01 The system receivers have input bandwidths that match the hopping channel bandwidths of their corresponding transmitters and shift frequencies in synchronization with the transmitted signals Frequency hopping spread spectrum systems are not required to employ all available hopping channels during each transmission. The transmitter is presented with a continuous data stream. In addition, a system employing short transmission bursts must comply with the definition of a frequency hopping system and must distribute its 79 channels and over the minimum number of hopping channels (75 channels). The incorporation of intelligence within a frequency hopping spread spectrum system that permits the system to recognize other users within the spectrum band so that it individually and independently chooses and adapts its hopsets to avoid hopping on occupied channels is permitted. The coordination of frequency hopping systems in any other manner for the express purpose of avoiding the simultaneous occupancy of individual hopping frequencies by multiple transmitters is not permitted. Note: 1. The EUT is a Bluetooth module with a built-in 2.4GHz transceiver. 2. These tests are conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 15 Subpart C Paragraph 15.247 for spread spectrum devices. 3. Regarding to the operation frequency, the lowest, middle, and highest frequency are selected to perform the test. 4. QuieTek verified among construction and function in typical operation, then shown in this test report. 1.2. Operational Description The EUT is a Bluetooth module with 79 channels. This device provides wireless technology that revolutionizes personal connectivity. It is the solution for the seamless integration of Bluetooth technology into personal computer enabling short-range wireless connections between desktop/laptop computers, Bluetooth-enabled peripherals, and portable handheld devices. Test Mode: Mode 1: Transmitter (Antenna 1) Mode 2: Transmitter (Antenna 3) Page: 5 of 53 Version:1.0


Document Created: 2006-03-31 17:03:20
Document Modified: 2006-03-31 17:03:20
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC