User Manual Part 2

FCC ID: I4L-MS6833

Users Manual

Download: PDF
FCCID_402124

Wireless 11g MiniPCI Card MP54G2 User’s Guide Frequency, Bandwidth, and Channels - 2.4 ~ 2.4835 GHz Frequency Band - 13 Channels - Maximum 3 Non-Overlapped Channels - 25 MHz Bandwidth Per Channel Transmitter Output Power - Output Power: 14 dBm ± 1 dB Wireless Coverage - Up to 500m Receiving Sensitivity - ≤ -82 dBm @ 11 Mbps (DSSS/CCK) - ≤ -68 dBm @ 54 Mbps (OFDM) Software Specifications Security Mechanism - 64-/128-Bit WEP Key - AES-CCM Authentication Mode (driver update) - WPA Support (driver update) - LEAP/PEAP Support (firmware upgrade) Authentication Mechanism - Open Authentication (Default) - Shared-Key Authentication Operating System - Microsoft® Windows® 98SE/ME/2000/XP 5

Wireless 11g MiniPCI Card MP54G2 User’s Guide >>> 1.4 System Requirements Before installing the MP54G2, your PC should meet the following: Desktop/notebook PC with an available MiniPCI slot. Windows® 98SE/ME/2000/XP operating system. Minimum 5M bytes free disk space for installing the driver and utilities. CD-ROM drive, double speed or higher. >>> 1.5 Package Contents Unpack the package and check all the items carefully. If any item contained is damaged or missing, please contact your local dealer as soon as possible. Also, keep the box and packing materials in case you need to ship the unit in the future. The package should contain the following items: One Wireless 11g MiniPCI Card - MP54G2. One Quick Installation Guide. One Installation CD including drivers, utilities, and the manuals. 6

Wireless 11g MiniPCI Card MP54G2 User’s Guide >>> 1.6 Product View External antenna connectors Connect to external antennas for enhanced data transmission and reception. The external antennas are well designed on the desktop or notebook computers. Golden Finger 7

Wireless 11g MiniPCI Card MP54G2 User’s Guide Hardware Installation The following diagrams provide you a basic installation for the MP54G2, including how to install and remove the MiniPCI card. The instruction below is suitable for most computers with MiniPCI slot. For more information about the MiniPCI module, please refer to your computer’s manual. >>> 2.1 Installing the MP54G2 1. Locate the Mini PCI slot on the mainboard. 2. Place the MP54G2 over the MiniPCI slot (at an angle of 30 degrees). Then, gently insert it into the slot until the golden finger of the card gets fully inserted. 3. Press down the card, and the retaining clips (on two sides of the slot) will lock onto the notches of the card. Foolproof notch 8

Wireless 11g MiniPCI Card MP54G2 User’s Guide >>> 2.2 Removing the MP54G2 1. Locate the MiniPCI slot with MP54G2 installed. 2. Press the retaining clips outwards, and the card should bound upwards slightly after being released from the slot. 3. Remove the card from the MiniPCI slot carefully. 9

Wireless 11g MiniPCI Card MP54G2 User’s Guide Software Installation This chapter describes the procedures of installing the driver and utility. Follow the instruction step by step to finish the installation. If you use Windows® 98SE/ME, please prepare the Windows® Setup CD at hand before installing the driver; because the system will ask you to insert the Setup CD to copy files during the installation. Please NOTE that the MP54G2 should be installed into your computer before installing the driver and utility. Then, the operating system will detect a new device and start to configure the new device. Click Cancel here to start installation from the InstallShield Wizard. Your Wireless LAN adapter type Tip: The wireless LAN adapter should be installed into your PC before installing the driver and utility. Click Step 1. Insert the software CD into your CD-ROM drive, and the Setup program should launch automatically. If the Autorun program doesn’ t launch automatically, click Start at the taskbar and select Run.... Type E:\setup.exe (where E is your CD-drive) in the Open box and click OK to launch the Setup program manually. The main screen of Setup program will appear as below. Click the Install Software button. 10

Wireless 11g MiniPCI Card MP54G2 User’s Guide Click Step 3. The welcome screen of InstallShield Wizard appears. Click Next. Read and accept the License Agreement; then, click Next. In the following window, enter the user’ s information (User Name, Organization) in the respective fields; then, click Next. Step 2. Click Install and the program will copy the necessary files to the system. The progress indicator shows the install- ing status. If you use Windows 98SE/ME, you may be asked to insert the Windows Setup CD during the installation. Please insert the Setup CD by the on-screen instruction to continue the installation. Step 4. Click Finish when the installation is completed. The MSI Wireless LAN icon* will appear in the status area. MSI Wireless LAN icon 11


Document Created: 2004-03-05 10:33:16
Document Modified: 2004-03-05 10:33:16
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC