User Manual

FCC ID:

Users Manual

Download: PDF

                             INA—WIFIUSB—4, USB WIFI/BLUETOOTH ADAPTOR

    INA—WIFIUSB—4 is a WLAN 11AC and Bluetooth combo dongle, provides a single
 USB interface to host, which fully supports the features and functional compliance of
 IEEE 802.11b/g/n/ac standards, It supports up to 866Mbps for IEEE802 AC MIMO—
 OFDM, INA—WIFIUSB—4 Bluetooth controller complies with Bluetooth core specification
 V4.1, and supports dual mode (BR/EDR+AMP+low Energy Controllers). It is backward
 compatible with previous versions including V2.1+EDR and v3.0+HS.Both BR/EDR and
 LE can operate simultaneously.

FEATURES
   2T2R 802.11n 2.4GHz WiFi speed up to max 300Mbps data rate.
   2T2R 802. 11ac 5GHz WiFi speed up to max 866Mbps data rate
   Complies with USB Specification 2.0
   Compatible with IEEE 802.11b/g/n/a/ac Specifications.
   Supports WPA, WPA2.
   Supports MU—MIMO (Multi—User MIMO)




SPECIFICATIONS                                                  USB WIFIBLUETOOTH ADAPTOR
                     Product Name               WLAN (2T2R)AC and BT 4.1 Combo Dongle
                     Standard                   IEEE 802.1fac/a/b/g/n/d/e/h/ l
                                                Bluetooth v2.1+EDR/ v3.0/ v3.0+HS/ v4.1
                                               WIFI:11ac mode up to 866Mbps
                     Data Transfer Rate        11n mode up to 300Mbps
                                                BT:Basic rate: 1Mbps and Enhanced data rate: 2, 3 Mbps
                                               CCK,DQPSK,DBPSK,BPSK,QPSK, 16QAM,64QAM,256QAM
                     Modulation Method          Bluetooth: SDPSK, m/4 DQPSK, GFSKFSK
                     Frequency Band            2 4GHz and 5GHz ISM Band
                     RF Oulput Power            13dBm@11n, 174Bm@11b, 15dBm@11g
                                                13dBm@11a, IdBm@11ac
                     (tolerance £2dBm)
                                                Bluetooth: + 8dBm
                                               —80dBm — 802.11b@11Mbps
                                               —71dBm — 802.11g@54MBps
                                               —67dBm — 802.11n@MCST7_BW20
                                               —64dBm — 802.11n@MCS7_BW40
                     Receiver Sensitivity      —57dBm — 802.11ac@NSS1_MCS9_BW20
                                               —54dBm — 802.11ac@NSS1_MCS9_BW40
                                               —51dBm — 802.11ac@NSS1_MCS9_BW80
                                                Bluetooth:
                                               —89dBm@1Mbps, —90dBm@2Mbps, —83dBm@3Mbps
                     LED                        POWER
                     Security                  WPA, WPA2
                     Power supply               USB / DC 5V/0.5A
                     Operating Temperature     0 ~ 50° C ambient temperature
                     Storage Temperature       —10 ~ 70°C ambient temperature
                     Humidity                  5 to 90 % maximum (non—condensing)
                     Dimension                 58 (L) * 24 (W)*10(H) mm

                     Our products only suitable for HDMI display application it improper be installed in
                     other products and it‘s not usual consumers can replace HDMI displays by them—
                     selves.


                           Specifications are subject to change without notice


Quick Setup
1. Press the Sitting Button.
2. Select the NETWORK menu.
3. Select the Smart Connection.
4. The device automatically tries to connect to thenetwork available (wired network first).
5. Choose the network you wish to use.
*The wireless AP(Router) maybe need to enter the security key.



                               Federal Communication Commission Interference Statement

       This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
       (1) This device may not cause harmful interference, and (2) this device must accept any interference
       received, including interference that may cause undesired operation.


       This equipment has been tested and found to comply with the limits for a Class B digital device,
       pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
       against harmful interference in a residential installation. This equipment generates, uses and can
       radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
       cause harmful interference to radio communications. However, there is no guarantee that
       interference will not occur in a particular installation. If this equipment does cause harmful
       interference to radio or television reception, which can be determined by turning the equipment off
       and on, the user is encouraged to try to correct the interference by one of the following measures:

       - Reorient or relocate the receiving antenna.
       - Increase the separation between the equipment and receiver.
       - Connect the equipment into an outlet on a circuit different from that


  to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.

Operations in the 5.15-5.25GHzband are restricted to indoor usage only.


FOR MOBILE DEVICE USAGE (>20cm/low power)


Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.


FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES)


Note: The country code selection is for non-US model only and is not available to all US model. Per FCC
regulation, all WiFi product marketed in US must fixed to US operation channels only.



Document Created: 2019-01-03 13:33:55
Document Modified: 2019-01-03 13:33:55

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC