DTS Test Report REV2

FCC ID: I28-ZBRZQ3BT

Test Report

Download: PDF
FCCID_4136055

RF TEST REPORT Report No.: FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Supersede Report No.: FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev2.0 Applicant : Zebra Technologies Corporation Host Product Name : Thermal Printer Module Model No. ZQ3BT Host Model No. : ZT610, ZT620 47 CFR 15.247 Test Standard : RSS247 Issue 2, 2017 ANSI C63.10: 2013 Test Method : RSS-Gen Issue 5, 2018 558074 D01 DTS Meas Guidance v05 FCC ID : I28-ZBRZQ3BT IC : 3798B-ZBRZQ3BT Dates of test : 12/10/2018 – 12/19/2018 Issue Date : 01/04/2019 Test Result : ☒ Pass ☐ Fail Equipment complied with the specification [X] Equipment did not comply with the specification [ ] This Test Report is Issued Under the Authority of: Shuo Zhang Chen Ge Test Engineer Engineer Reviewer Issued By: SIEMIC Laboratories 775 Montague Expressway, Milpitas, 95035 CA 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 2 of 18 Laboratory Introduction SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management throughout a project. Our extensive experience with China, Asia Pacific, North America, European, and International compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets. Accreditations for Conformity Assessment Country/Region Accreditation Body Scope USA FCC, A2LA EMC, RF/Wireless, Telecom Canada IC, A2LA, NIST EMC, RF/Wireless, Telecom Taiwan BSMI, NCC, NIST EMC, RF, Telecom, Safety Hong Kong OFTA, NIST RF/Wireless, Telecom Australia NATA, NIST EMC, RF, Telecom, Safety Korea KCC/RRA, NIST EMI, EMS, RF, Telecom, Safety Japan VCCI, JATE, TELEC, RFT EMI, RF/Wireless, Telecom Mexico NOM, COFETEL, Caniety Safety, EMC, RF/Wireless, Telecom Europe A2LA, NIST EMC, RF, Telecom, Safety Israel MOC, NIST EMC, RF, Telecom, Safety Accreditations for Product Certifications Country Accreditation Body Scope USA FCC TCB, NIST EMC, RF, Telecom Canada IC FCB, NIST EMC, RF, Telecom Singapore iDA, NIST EMC, RF, Telecom EU NB EMC & Radio Equipment Directive (RED) Japan MIC (RCB 208) RF, Telecom Hong Kong OFTA (US002) RF, Telecom 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 3 of 18 CONTENTS 1 REPORT REVISION HISTORY .......................................................................................................................................4 2 EXECUTIVE SUMMARY.................................................................................................................................................5 3 CUSTOMER INFORMATION ..........................................................................................................................................5 4 TEST SITE INFORMATION ............................................................................................................................................5 5 MODIFICATION .............................................................................................................................................................5 6 EUT INFORMATION ......................................................................................................................................................6 6.1 EUT Description ........................................................................................................................................................6 6.2 Radio Description ......................................................................................................................................................6 7 SUPPORTING EQUIPMENT/SOFTWARE AND CABLING DESCRIPTION .........................................................................7 7.1 Supporting Equipment ...............................................................................................................................................7 7.2 Cabling Description ...................................................................................................................................................7 7.3 Test Software Description ..........................................................................................................................................7 8 TEST SUMMARY ...........................................................................................................................................................8 9 MEASUREMENT UNCERTAINTY ...................................................................................................................................9 10 MEASUREMENTS, EXAMINATION AND DERIVED RESULTS .................................................................................. 10 10.1 Antenna Requirement.......................................................................................................................................... 10 10.2 Radiated Spurious Emissions below 1GHz ............................................................................................................ 11 10.3 Radiated Spurious Emissions between 1GHz – 25GHz .......................................................................................... 13 ANNEX A. TEST INSTRUMENT ........................................................................................................................................... 16 ANNEX B. SIEMIC ACCREDITATION ................................................................................................................................... 17 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 4 of 18 1 Report Revision History Report Report No. Description Issue Date Version FCC_IC_RF_SL18102402-ZBR-062_BLE None Original 12/19/2018 FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev1.0 1.0 Update EUT info 12/27/2018 FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev2.0 2.0 Change Radio Description 01/03/2019 FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 3.0 Update Antenna Info 01/04/2019 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 5 of 18 2 Executive Summary The purpose of this test program was to demonstrate compliance of following product Company: Zebra Technologies Corporation Host Product Name: Thermal Printer Host Model No.: ZT610, ZT620 Module Model No. ZQ3BT against the current Stipulated Standards. The specified model product stated above has demonstrated compliance with the Stipulated Standard listed on 1st page. 3 Customer information Applicant Name Zebra Technologies Corporation Applicant Address 3 Overlook Point, Lincolnshire, IL 60069 Manufacturer Name Zebra Technologies Corporation Manufacturer Address 3 Overlook Point, Lincolnshire, IL 60069 4 Test site information Lab performing tests SIEMIC Laboratories Lab Address 775 Montague Expressway, Milpitas, CA 95035 FCC Test Site No. 881796 IC Test Site No. 4842D-2 VCCI Test Site No. A0133 5 Modification Index Item Description Note - - - - 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 6 of 18 6 EUT Information 6.1 EUT Description Host Product Name Thermal Printer Host Model No. ZT610, ZT620 Module Model No. ZQ3BT Trade Name Zebra Technologies Corporation Serial No. 76J184300386, 76J184400121 Input Power 100-240V, 50-60Hz Power Adapter Manu/Model N/A, internal PSU Power Adapter SN N/A, internal PSU Product Hardware version N/A Date of EUT received 12/01/2018 Equipment Class/ Category DTS, DSS Port/Connectors USB, USB host x2, Gig-Ethernet, RS232, Parallel Only model ZT620 is tested as worst case. ZT610 and ZT620 Remark have the same internal power supply and control PCB 6.2 Radio Description Bluetooth LE: Radio Type Bluetooth LE Radio Module ZQ3BT Operating Frequency 2402MHz-2480MHz Modulation DSSS (LE) Channel Spacing 2MHz (LE) Antenna Type Chip Antenna Gain 1.69 dBi Antenna Connector Type N/A 4.72 dBm Maximum conducted power See FCC IC_SL17060501-ZBR-021_BLE_Rev2.0 pg24 Maximum EIRP 6.41 dBm 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 7 of 18 7 Supporting Equipment/Software and cabling Description 7.1 Supporting Equipment Supporting Equipment Item Model Serial Number Manufacturer Note Description 1 Laptop ThinkPad T420s N/A Lenovo - 7.2 Cabling Description Connection Start Connection Stop Length / shielding Info Name Note From I/O Port To I/O Port Length (m) Shielding USB EUT I/O Port Laptop USB 2 Unshielded - 7.3 Test Software Description Test Item Software Description RF Testing Zebra Toolbox Set the EUT to transmit continuously in diferent test mode 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 8 of 18 8 Test Summary Test Item Test standard Test Method/Procedure Pass / Fail FCC 15.203 FCC ANSI C63.10 – 2013 ☒ Pass Antenna Requirement IC - IC 558074 D01 DTS Meas Guidance v05 ☐ N/A FCC 15.205 FCC ANSI C63.10:2013 ☒ Pass Restricted Band of Operation IC RSS Gen 8.10 IC 558074 D01 DTS Meas Guidance v05 ☐ N/A FCC 15.207(a) FCC ANSI C63.10:2013 ☒ Pass* AC Conducted Emissions IC RSS Gen 8.8 IC RSS Gen Issue 5: 2018 ☐ N/A DTS Band Requirement Test Item Test standard Test Method/Procedure Pass / Fail - - - - ☒ Pass* 99% Occupied Bandwidth IC RSS Gen 6.6 IC RSS Gen Issue 5: 2018 ☐ N/A FCC 15.247(a)(2) FCC ☒ Pass* 6dB Bandwidth 558074 D01 DTS Meas Guidance v05 IC RSS247 (5.2.1) IC ☐ N/A Band Edge and Radiated FCC 15.247(d) FCC ANSI C63.10:2013 ☒ Pass Spurious Emissions 558074 D01 DTS Meas Guidance v05 ☐ N/A IC RSS247 (5.5) IC FCC 15.247(b) FCC ☒ Pass* Output Power 558074 D01 DTS Meas Guidance v05 IC RSS247 (5.4.4) IC ☐ N/A ☐ Pass Receiver Spurious Emissions IC RSS Gen (4.8) IC RSS Gen Issue 5: 2018 ☒ N/A FCC 15.247(e) FCC - ☐ Pass Antenna Gain > 6 dBi IC - IC - ☒ N/A FCC 15.247(e) FCC ☒ Pass* Power Spectral Density 558074 D01 DTS Meas Guidance v05 IC RSS247 (5.2.2) IC ☐ N/A FCC 15.247(i) FCC - ☐ Pass RF Exposure requirement IC RSS Gen(5.5) IC RSS Gen Issue 5: 2018 ☒ N/A 1. All measurement uncertainties do not take into consideration for all presented test results. 2. The applicant shall ensure frequency stability by showing that an emission is maintained within the band of operation Remark under all normal operating conditions as specified in the user’s manual. 3. Pass* : Please refer to FCC IC_SL17060501-ZBR-021-BLE_Rev2.0 test report. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 9 of 18 9 Measurement Uncertainty Emissions Test Item Frequency Range Description Uncertainty Confidence level of approximately 95% (in the AC Conducted Emissions 150KHz – 30MHz case where distributions are normal), with a ±3.5dB coverage factor of 2 Confidence level of approximately 95% (in the RF conducted measurement 150KHz – 40GHz case where distributions are normal), with a ±0.95dB coverage factor of 2 Confidence level of approximately 95% (in the case Radiated Spurious Emissions 30MHz – 1GHz where distributions are normal), with a coverage ±6dB factor of 2 (for EUTs < 0.5m X 0.5m X 0.5m) Confidence level of approximately 95% (in the case Radiated Spurious Emissions 1GHz – 40GHz where distributions are normal), with a coverage ±6dB factor of 2 (for EUTs < 0.5m X 0.5m X 0.5m) 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 10 of 18 10 Measurements, Examination and Derived Results 10.1 Antenna Requirement Spec Requirement Applicable An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. Antenna requirement must meet at least one of the following: §15.203 ☒ a) Antenna must be permanently attached to the device. b) The antenna must use a unique type of connector to attach to the device. c) Device must be professionally installed. The installer shall be responsible for ensuring that the correct antenna is employed by the device. Remark The EUT uses a Chip antenna that is permanently attached to the board which meets the requirement. Result ☒ PASS ☐ FAIL 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 11 of 18 10.2 Radiated Spurious Emissions below 1GHz Requirement(s): Spec Item Requirement Applicable Except higher limit as specified elsewhere in other section, the emissions from the low-power radio-frequency devices shall not exceed the field strength levels specified in the following table and the level of any unwanted emissions shall not exceed the level of the fundamental emission. The tighter limit applies at the band 47CFR§15.247(d) edges ☒ a) RSS247 (5.5) Frequency range (MHz) Field Strength (uV/m) 30 – 88 100 88 – 216 150 216 960 200 Above 960 500 Test Setup 1. The EUT was switched on and allowed to warm up to its normal operating condition. 2. The test was carried out at the selected frequency points obtained from the EUT characterisation. Maximization of the emissions, was carried out by rotating the EUT, changing the antenna polarization, and adjusting the antenna height in the following manner: a. Vertical or horizontal polarisation (whichever gave the higher emission level over a full Procedure rotation of the EUT) was chosen. b. The EUT was then rotated to the direction that gave the maximum emission. c. Finally, the antenna height was adjusted to the height that gave the maximum emission. 3. A Quasi-peak measurement was then made for that frequency point. 4. Steps 2 and 3 were repeated for the next frequency point, until all selected frequency points were measured. The EUT was scanned up to 1GHz. Both horizontal and vertical polarities were investigated. The results Remark show only the worst case. Result ☒ Pass ☐ Fail Test Data ☒ Yes (See below) ☐ N/A Test Plot ☒ Yes (See below) ☐ N/A Test was done by Shuo Zhang at 10m chamber. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 12 of 18 Radiated Emission Test Results (Below 1GHz) Test specification Below 1GHz Temp (°C): 23 Environmental Conditions: Humidity (%) 46 Atmospheric (mbar): 1018 Mains Power: 120VAC, 60Hz Result Pass Tested by: Shuo Zhang Test Date: 12/12/2018 Remarks: BLE, Middle Channel Quasi Max Measurements Frequency Raw Cable AF Level Measurement Pol Hgt Azt Limit Margin Pass MHz dBuV Loss dB dBuV/m Type (V/H) cm Deg dBuV/m dB /Fail 913.06 38 15.9 -12.54 41.35 Quasi Max V 137 102 46 -4.65 Pass 724.11 36.77 15.19 -15.1 36.86 Quasi Max V 100 13 46 -9.14 Pass 30.00 24.37 11.12 -12.08 23.4 Quasi Max V 105 281 40 -16.6 Pass 254.42 46.78 12.96 -24.21 35.53 Quasi Max H 104 12 46 -10.47 Pass 733.91 32.28 15.17 -15.09 32.36 Quasi Max V 165 28 46 -13.64 Pass 816.97 29.03 15.52 -14.22 30.33 Quasi Max V 137 100 46 -15.67 Pass Note: Both horizontal and vertical polarities were investigated. The results above show only the worst case. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 13 of 18 10.3 Radiated Spurious Emissions between 1GHz – 25GHz Requirement(s): Spec Item Requirement Applicable For non-restricted band, In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB or 30dB below that in the 100 kHz bandwidth within the band that ☒ a) contains the highest level of the desired power, determined by the measurement 47CFR§15.247(d), method on output power to be used. Attenuation below the general limits RSS247(A8.5) specified in § 15.209(a) is not required ☐ 20 dB down ☒ 30 dB down or restricted band, emission must also comply with the radiated emission limits b) ☒ specified in 15.209 Test Setup 1. The EUT was switched on and allowed to warm up to its normal operating condition. 2. The test was carried out at the selected frequency points obtained from the EUT characterisation. Maximization of the emissions, was carried out by rotating the EUT, changing the antenna polarization, and adjusting the antenna height in the following manner: a. Vertical or horizontal polarisation (whichever gave the higher emission level over a full Procedure rotation of the EUT) was chosen. b. The EUT was then rotated to the direction that gave the maximum emission. c. Finally, the antenna height was adjusted to the height that gave the maximum emission. 3. An average measurement was then made for that frequency point. 4. Steps 2 and 3 were repeated for the next frequency point, until all selected frequency points were measured. The EUT was scanned up to 40GHz. Both horizontal and vertical polarities were investigated. The results Remark show only the worst case. Result ☒ Pass ☐ Fail Test Data ☒ Yes (See below) ☐ N/A Test Plot ☐ Yes (See below) ☒ N/A Test was done by Shuo Zhang at 10m chamber. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 14 of 18 Radiated Emission Test Results (Above 1GHz) Above 1GHz-25GHz – BLE-2402MHz Frequency Raw Cable AF Level Measurement Pol Height Azt Limit Margin Pass MHz dBuV Loss dB dBuV/m Type (V/H) cm Deg dBuV/m dB /Fail 1285.725 52.4 2.14 -5.98 48.56 Peak Max V 136 285 74 -25.44 Pass 4804.46 47.99 4.1 -0.93 51.17 Peak Max H 102 48 74 -22.84 Pass 3307.089 41.19 3.49 -1.6 43.09 Peak Max V 231 286 74 -30.92 Pass 1285.725 30.09 2.14 -5.98 26.25 Average Max V 136 285 54 -27.75 Pass 4804.46 39.09 4.1 -0.93 42.27 Average Max H 102 48 54 -11.73 Pass 3307.089 29.14 3.49 -1.6 31.03 Average Max V 231 286 54 -22.97 Pass Above 1GHz-25GHz – BLE-2440MHz Frequency Raw Cable AF Level Measurement Pol Height Azt Limit Margin Pass MHz dBuV Loss dB dBuV/m Type (V/H) cm Deg dBuV/m dB /Fail 4879.772 41.33 4.18 -1 44.51 Peak Max V 142 193 74 -29.49 Pass 6177.435 40.1 4.71 -0.33 44.48 Peak Max V 218 270 74 -29.52 Pass 1773.355 41.75 2.59 -3.91 40.44 Peak Max V 170 135 74 -33.56 Pass 4879.772 28.11 4.18 -1 31.29 Average Max V 142 193 54 -22.71 Pass 6177.435 27.08 4.71 -0.33 31.45 Average Max V 218 270 54 -22.55 Pass 1773.355 29.31 2.59 -3.91 28 Average Max V 170 135 54 -26 Pass Above 1GHz-25GHz – BLE –2480MHz Frequency Raw Cable AF Level Measurement Pol Height Azt Limit Margin Pass MHz dBuV Loss dB dBuV/m Type (V/H) cm Deg dBuV/m dB /Fail 4959.385 40.34 4.25 -1.06 43.53 Peak Max V 257 151 74 -30.47 Pass 9558.358 40.14 5.64 0.47 46.24 Peak Max V 200 74 74 -27.76 Pass 4171.481 40.76 3.91 -0.78 43.9 Peak Max V 187 196 74 -30.1 Pass 4959.385 27 4.25 -1.06 30.19 Average Max V 257 151 54 -23.81 Pass 9558.358 27.36 5.64 0.47 33.47 Average Max V 200 74 54 -20.53 Pass 4171.481 27.83 3.91 -0.78 30.96 Average Max V 187 196 54 -23.04 Pass 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 15 of 18 Restricted Band Test plot (BLE) Restricted Band BLE 2402MHz Restricted Band BLE 2480MHz 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 16 of 18 Annex A. TEST INSTRUMENT Instrument Model Serial # Cal Date Cal Cycle Cal Due In use Radiated Emissions Keysight EXA 44GHz Spectrum N9030B(PXA) MY57140374 09/06/2018 1 Year 09/06/2019 Analyzer Bi-Log antenna (30MHz~2GHz) JB1 A030702 03/09/2018 1 Year 03/09/2019 Horn Antenna (1GHz~26GHz) 3115 100059 11/09/2018 1 Year 11/09/2019 Horn Antenna (18GHz~40GHz) PA-840 181251 06/23/2018 1 Year 06/23/2019 Preamplifier (100KHz-7GHz) LPA-6-30 11170602 05/09/2018 1 Year 05/09/2019 Pre-Amplifier (1-26.5GHz) 8449B 3008A00715 08/16/2018 1 Year 08/16/2019 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 17 of 18 Annex B. SIEMIC Accreditation Accreditations Document Scope / Remark ISO 17025 (A2LA) Please see the documents for the detailed scope ISO Guide 65 (A2LA) Please see the documents for the detailed scope TCB Designation A1, A2, A3, A4, B1, B2, B3, B4, C FCC DoC Accreditation FCC Declaration of Conformity Accreditation FCC Site Registration 3 meter site FCC Site Registration 10 meter site IC Site Registration 3 meter site IC Site Registration 10 meter site Radio Equipment: EN45011: EN ISO/IEC 17065 EU NB Electromagnetic Compatibility: EN45011 – EN ISO/IEC 17065 Singapore iDA Phase I, Phase II CB(Certification Body) Vietnam MIC Please see the document for the detailed scope CAB Accreditation (Phase II) OFCA Foreign Certification Body for Radio and Telecom Hong Kong OFCA (Phase I) Conformity Assessment Body for Radio and Telecom Radio: Scope A – All Radio Standard Specification in Category I Industry Canada CAB Telecom: CS-03 Part I, II, V, VI, VII, VIII 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18102402-ZBR-062_BLE_Rev3.0 Page 18 of 18 Radio: A1. Terminal equipment for purpose of calling Japan Recognized Certification Telecom: B1. Specified radio equipment specified in Article 38-2, Paragraph 1, Item Body Designation 1 of the Radio Law EMI: KCC Notice 2008-39, RRL Notice 2008-3: CA Procedures for EMI KN22: Test Method for EMI EMS: KCC Notice 2008-38, RRL Notice 2008-4: CA Procedures for EMS KN24, KN61000-4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11: Test Method for EMS Korea CAB Accreditation Radio: RRL Notice 2008-26, RRL Notice 2008-2, RRL Notice 2008-10, RRL Notice 2007-49, RRL Notice 2007-20, RRL Notice 2007-21, RRL Notice 2007- 80, RRL Notice 2004-68 Telecom: President Notice 20664, RRL Notice 2007-30, RRL Notice 2008-7 with attachments 1, 3, 5, 6; President Notice 20664, RRL Notice 2008-7 with attachment 4 LP0002, PSTN01, ADSL01, ID0002, IS6100, CNS14336, PLMN07, PLMN01, Taiwan NCC CAB Recognition PLMN08 Taiwan BSMI CAB Recognition CNS 13438 R-3083: Radiation 3 meter site Japan VCCI C-3421: Main Ports Conducted Interference Measurement T-1597: Telecommunication Ports Conducted Interference Measuremet EMC: AS/NZS CISPR 11, AS/NZS CISPR 14.1, AS/NZS CISPR22, AS/NZS 61000.6.3, AS/NZS 61000.6.4 Radiocommunications: AS/NZS 4281, AS/NZS 4268, AS/NZS 4280.1, AS/NZS 4280.2, AS/NZS 4295, AS/NZS 4582, AS/NZS 4583, AS/NZS 4769.1, Australia CAB Recognition AS/NZS 4769.2, AS/NZS 4770, AS/NZS 4771 Telecommunications: AS/ACIF S002:05, AS/ACIF S003:06, AS/ACIF S004:06 AS/ACIF S006:01, AS/ACIF S016:01, AS/ACIF S031:01, AS/ACIF S038:01, AS/ACIF S040:01, AS/ACIF S041:05, AS/ACIF S043.2:06, AS/ACIF S60950.1 AS/ACIF S002, AS/ACIF S003, AS/ACIF S004, AS/ACIF S006, AS/ACIF Australia NATA Recognition S016,AS/ACIF S031, AS/ACIF S038, AS/ACIF S040, AS/ACIF S041, AS/ACIF S043.2 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:


Document Created: 2019-01-04 09:37:36
Document Modified: 2019-01-04 09:37:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC