Co-location Test Report REV

FCC ID: I28-ZBRZQ3BT

Test Report

Download: PDF
FCCID_4121176

RF TEST REPORT Report No.: FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 Supersede Report No.: FCC_IC_RF_SL18102402-ZBR-062_Co-Location Applicant : Zebra Technologies Corporation Host Product Name : Thermal Printer ZQ3BT Module Model No. : M6e-MicroTT FCC 15.225, 15.247,15.249 Test Standard : RSS 247 Issue 2, RSS-210 Issue 9: 2016 FCC 15.225, 15.247 Test Method : ANSI C63.10 2013 RSS Gen Issue 5 2014 I28-ZBRZQ3BT FCC ID : I28-RFIDM6EMTT 3798B-ZBRZQ3BT IC : RFIDM6EMTT Dates of test : 12/10/2018 – 12/20/2018 Issue Date : 12/27/2018 Test Result : ☒ Pass ☐ Fail Equipment complied with the specification [X ] Equipment did not comply with the specification [ ] This Test Report is Issued Under the Authority of: Shuo Zhang Chen Ge RF Test Engineer Engineer Reviewer This test report may be reproduced in full only Test result presented in this test report is applicable to the tested sample only Issued By: SIEMIC Laboratories 775 Montague Expressway, Milpitas, CA 95035 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 N Page 2 of 17 Laboratory Introduction SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management throughout a project. Our extensive experience with China, Asia Pacific, North America, European, and International compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets. Accreditations for Conformity Assessment Country/Region Accreditation Body Scope USA FCC, A2LA EMC, RF/Wireless, Telecom Canada IC, A2LA, NIST EMC, RF/Wireless, Telecom Taiwan BSMI, NCC, NIST EMC, RF, Telecom, Safety Hong Kong OFTA, NIST RF/Wireless, Telecom Australia NATA, NIST EMC, RF, Telecom, Safety Korea KCC/RRA, NIST EMI, EMS, RF, Telecom, Safety Japan VCCI, JATE, TELEC, RFT EMI, RF/Wireless, Telecom Mexico NOM, COFETEL, Caniety EMC, RF/Wireless, Telecom, Safety Europe A2LA, NIST EMC, RF, Telecom, Safety Israel MOC, NIST EMC, RF, Telecom, Safety Accreditations for Product Certifications Country Accreditation Body Scope USA FCC TCB, NIST EMC, RF, Telecom Canada IC FCB, NIST EMC, RF, Telecom Singapore iDA, NIST EMC, RF, Telecom EU NB EMC & RED Directive Japan MIC (RCB 208) RF, Telecom Hong Kong OFTA (US002) RF, Telecom 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 N Page 3 of 17 CONTENTS 1 REPORT REVISION HISTORY........................................................................................................................................... 4 2 EXECUTIVE SUMMARY .................................................................................................................................................... 5 3 CUSTOMER INFORMATION ............................................................................................................................................. 5 4 TEST SITE INFORMATION ................................................................................................................................................ 5 5 MODIFICATION................................................................................................................................................................. 5 6 EUT INFORMATION .......................................................................................................................................................... 6 6.1 EUT Description ........................................................................................................................................................... 6 6.2 Radio Description ......................................................................................................................................................... 6 7 SUPPORTING EQUIPMENT/SOFTWARE AND CABLING DESCRIPTION .......................................................................... 7 7.1 Supporting Equipment ................................................................................................................................................... 7 7.2 Cabling Description ....................................................................................................................................................... 7 7.3 Test Software Description.............................................................................................................................................. 7 8 TEST SUMMARY .............................................................................................................................................................. 8 9 MEASUREMENT UNCERTAINTY ...................................................................................................................................... 9 10 MEASUREMENTS, EXAMINATION AND DERIVED RESULTS .................................................................................... 10 10.1 Antenna Requirement ............................................................................................................................................. 10 10.2 Radiated Measurements ......................................................................................................................................... 11 10.2.1 Radiated Measurements 30MHz to 1GHz ............................................................................................................ 11 10.2.2 Radiated Spurious Emissions between 1GHz-25GHz ........................................................................................... 13 ANNEX A. TEST INSTRUMENT .............................................................................................................................................. 15 ANNEX A. SIEMIC ACCREDITATION ...................................................................................................................................... 16 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 N Page 4 of 17 1 Report Revision History Report No. Report Version Description Issue Date FCC_IC_RF_SL18012901-ZBR-003_Co-Location None Original 12/20/2018 FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 1.0 Update EUT info 12/27/2018 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 N Page 5 of 17 2 Executive Summary The purpose of this test program was to demonstrate compliance of following product Company: Zebra Technologies Corporation Host Product: ZT610, ZT620 ZQ3BT Module(s) Model: M6e-MicroTT against the current Stipulated Standards. The specified model product stated above has demonstrated compliance with the Stipulated Standard listed on 1st page. 3 Customer information Applicant Name : Zebra Technologies Corporation Applicant Address : 3 Overlook Point Lincolnshire, IL 60069, USA Manufacturer Name : Zebra Technologies Corporation Manufacturer Address : 3 Overlook Point Lincolnshire, IL 60069, USA 4 Test site information Lab performing tests : SIEMIC Laboratories Lab Address : 775 Montague Expressway, Milpitas, CA 95035 FCC Test Site No. : 881796 IC Test Site No. : 4842D-2 VCCI Test Site No. : A0133 5 Modification Index Item Description Note - - - - - - - - 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 N Page 6 of 17 6 EUT Information 6.1 EUT Description Host Product Name Thermal Printer Host Model No. ZT610, ZT620 Trade Name Zebra Technologies Corporation Serial No. 76J184300386, 76J184400121 Input Power 1100-240V, 50-60Hz Power Adapter Manu/Model N/A, internal PSU Power Adapter SN N/A, internal PSU Product Hardware version N/A Date of EUT received 12/01/2018 Equipment Class/ Category DTS, DSS Port/Connectors USB, USB host x2, Gig-Ethernet, RS232, Parallel Only model ZT620 is tested as worst case. ZT610 and ZT620 Remark have the same internal power supply and control PCB 6.2 Radio Description Specifications for Radio: Bluetooth LE: Radio Type Bluetooth LE Operating Frequency 2402MHz-2480MHz Modulation DSSS (LE) Channel Spacing 2MHz Antenna Type Chip Antenna Gain 1.69 dBi Antenna Connector Type N/A Note N/A BT Radio: Radio Type Bluetooth (Ver4.0+EDR) Operating Frequency 2402MHz-2480MHz Modulation FHSS (BDR, EDR) Channel Spacing 1MHz (BDR, EDR) Antenna Type Chip Antenna Gain 1.69 dBi Antenna Connector Type - RFID: Radio Type UHF RFID Operating Frequency 902.75-927.25 MHz Modulation ASK Antenna Type Loop/Coil Antenna Gain -36dBi Channel Separation 500 KHz Number of Channels 50 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 N Page 7 of 17 7 Supporting Equipment/Software and cabling Description 7.1 Supporting Equipment Supporting Equipment Item Model Serial Number Manufacturer Note Description 1 Laptop ThinkPad T420s N/A Lenovo - 7.2 Cabling Description Connection Start Connection Stop Length / shielding Info Name Note From I/O Port To I/O Port Length (m) Shielding USB EUT I/O Port Laptop USB 2 Unshielded - 7.3 Test Software Description Test Item Software Description RF Testing Zebra Toolbox Set the EUT to transmit continuously in different test mode 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 N Page 8 of 17 8 Test Summary Test Item Test standard Test Method/Procedure Pass / Fail FCC 15.203 ANSI C63.10 – 2013 ☒ Pass Antenna Requirement IC - 558074 D01 DTS Meas Guidance v05 ☐ N/A FCC 15.225(a) ANSI C63.10 2013 ☐ Pass AC Conducted Emissions Voltage IC RSS Gen (7.2.2) RSS Gen. 8.8 ☒ N/A Test Item Test standard Test Method/Procedure Pass / Fail FCC FCC ☒ Pass Radiated Spurious Emission - RSS Gen Issue 5: 2018 IC IC ☐ N/A FCC - FCC - ☐ Pass Frequency Stability ☒ N/A IC - IC - FCC - FCC - ☐ Pass Occupied Bandwidth ☒ N/A IC - IC - 1. All measurement uncertainties are not taken into consideration for all presented test result. 2. The applicant shall ensure frequency stability by showing that an emission is maintained Remark within the band of operation under all normal operating conditions as specified in the user’s manual. 3. Only Radiated Spurious Emission for colocation has been tested for this report 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 N Page 9 of 17 9 Measurement Uncertainty Emissions Test Item Frequency Range Description Uncertainty Confidence level of approximately 95% (in the AC Conducted Emissions 150KHz – 30MHz case where distributions are normal), with a ±3.5dB coverage factor of 2 Confidence level of approximately 95% (in the RF conducted measurement 150KHz – 40GHz case where distributions are normal), with a ±0.95dB coverage factor of 2 Confidence level of approximately 95% (in the case Radiated Spurious Emissions 30MHz – 1GHz where distributions are normal), with a coverage ±6dB factor of 2 (for EUTs < 0.5m X 0.5m X 0.5m) Confidence level of approximately 95% (in the case Radiated Spurious Emissions 1GHz – 40GHz where distributions are normal), with a coverage ±6dB factor of 2 (for EUTs < 0.5m X 0.5m X 0.5m) 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 N Page 10 of 17 10 Measurements, examination and derived results 10.1 Antenna Requirement Spec Requirement Applicable An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. Antenna requirement must meet at least one of the following: §15.203 ☒ a) Antenna must be permanently attached to the device. b) The antenna must use a unique type of connector to attach to the device. c) Device must be professionally installed. The installer shall be responsible for ensuring that the correct antenna is employed by the device. The Bluetooth Module uses a Chip antenna that is permanently attached to the board which meets the Remark requirement. The UHF RFID Module uses a Loop/Coil antenna that is integrated to the board which meets the requirement. Result ☒ PASS ☐ FAIL 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 N Page 11 of 17 10.2 Radiated Measurements 10.2.1 Radiated Measurements 30MHz to 1GHz Requirement(s): Spec Requirement Applicable Operation within the band 13.110–14.010 MHz: (a) The field strength of any emissions within the band 13.553–13.567 MHz shall not exceed 15,848 microvolts/meter at 30 meters. (b) Within the bands 13.410–13.553 MHz and 13.567–13.710 MHz, the field strength of any emissions shall not exceed 334 microvolts/meter at 30 meters. (c) Within the bands 13.110–13.410 MHz and 13.710–14.010 MHz the field strength of any emissions shall not exceed 106 microvolts/meter at 30 meters. 47 CFR §15.225 (d) The field strength of any emissions appearing outside of the 13.110–14.010 ☒ RSS-210 (B.6) MHz band shall not exceed the general radiated emission limits in §15.209. Frequency range (MHz) Field Strength (uV/m) 30 – 88 100 88 – 216 150 216 960 200 Above 960 500 Test Setup 1. The EUT was switched on and allowed to warm up to its normal operating condition. 2. The test was carried out at the selected frequency points obtained from the EUT characterisation. Maximization of the emissions, was carried out by rotating the EUT, changing the antenna polarization, and adjusting the antenna height in the following manner: a. Vertical or horizontal polarisation (whichever gave the higher emission level over a full Procedure rotation of the EUT) was chosen. b. The EUT was then rotated to the direction that gave the maximum emission. c. Finally, the antenna height was adjusted to the height that gave the maximum emission. 3. A Quasi-peak measurement was then made for that frequency point. 4. Steps 2 and 3 were repeated for the next frequency point, until all selected frequency points were measured. Temperature 20.1°C Test Date 12/10/2018 – 12/19/2018 Environmental conditions Relative Humidity 36% Atmospheric Pressure 1026mbar Remark - Result ☒ Pass ☐ Fail Test Data ☒ Yes (See below) ☐ N/A Test Plot ☒ Yes (See below) ☐ N/A Test was done by Shuo Zhang at 10-meter chamber. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 N Page 12 of 17 Test specification: Radiated Emissions Mains Power: 120VAC, 60Hz Tested by: Shuo Zhang ☒ Pass Result: ☐ Fail Test Date: 12/12/2018 Remarks: UHF and BT transmit simultaneously ƒ=30MHz – 1000MHz plot and 3-meter distance ƒ=30MHz – 1000MHz Measurements Frequency Raw Cable AF Level Measurement Hgt Azt Limit Margin Pass Pol MHz dBµV/m Loss dB dBµV/m Type cm Deg dBµV/m dB /Fail 167.23 48.11 12.33 -23.6 36.84 Quasi Max H 143 253 43.5 -6.66 Pass 86.39 45.55 11.75 -27.7 29.6 Quasi Max V 101 206 40 -10.4 Pass 41.76 34.26 11.34 -21.53 24.07 Quasi Max V 100 188 40 -15.93 Pass 250.78 45.35 12.93 -24.41 33.87 Quasi Max H 107 233 46 -12.13 Pass 707.31 22.89 15.19 -15.17 22.91 Quasi Max H 161 242 46 -23.09 Pass 815.74 20.14 15.51 -14.27 21.39 Quasi Max V 345 257 46 -24.61 Pass 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 N Page 13 of 17 10.2.2 Radiated Spurious Emissions between 1GHz-25GHz Requirement(s): Spec Item Requirement Applicable For non-restricted band, In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB or 30dB below that in the 100 ☒ a) kHz bandwidth within the band that contains the highest level of the 47CFR§15.247(d), desired power, determined by the measurement method on output power RSS210(A8.5) to be used. Attenuation below the general limits specified in § 15.209(a) is not required ☐ 20 dB down ☒ 30 dB down or restricted band, emission must also comply with the radiated emission b) ☐ limits specified in 15.209 Test Setup 1. The EUT was switched on and allowed to warm up to its normal operating condition. 2. The test was carried out at the selected frequency points obtained from the EUT characterisation. Maximization of the emissions, was carried out by rotating the EUT, changing the antenna polarization, and adjusting the antenna height in the following manner: a. Vertical or horizontal polarisation (whichever gave the higher emission level over a full Procedure rotation of the EUT) was chosen. b. The EUT was then rotated to the direction that gave the maximum emission. c. Finally, the antenna height was adjusted to the height that gave the maximum emission. 3. An average measurement was then made for that frequency point. 4. Steps 2 and 3 were repeated for the next frequency point, until all selected frequency points were measured. The EUT was scanned up to 40GHz. Both horizontal and vertical polarities were investigated. The results Remark show only the worst case. Result ☒ Pass Test Data ☒ Yes (See below) ☐ N/A Test Plot ☐ Yes (See below) ☒ N/A Test was done by Shuo Zhang at 10-meter chamber. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 N Page 14 of 17 Test specification: Radiated Emissions Mains Power: 120VAC, 60Hz Tested by: Shuo Zhang ☒ Pass Result: ☐ Fail Test Date: 12/12/2018 Remarks: UHF and BT transmit simultaneously Frequency Raw Cable AF Level Measurement Hgt Azt Limit Margin Pass Pol MHz dBµV/m Loss dB dBµV/m Type cm Deg dBµV/m dB /Fail 4803.64 55.59 4.1 -0.93 58.77 Peak Max H 103 54 74 -15.23 Pass 8818.23 41.25 5.62 -0.15 46.73 Peak Max V 101 144 74 -27.27 Pass 1593.34 47.43 2.43 -6.04 43.83 Peak Max V 137 270 74 -30.17 Pass 4803.64 48.76 4.1 -0.93 51.93 Average Max H 103 54 54 -2.07 Pass 8818.23 27.5 5.62 -0.15 32.98 Average Max V 101 144 54 -21.02 Pass 1593.34 32.1 2.43 -6.04 28.49 Average Max V 137 270 54 -25.51 Pass 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 N Page 15 of 17 Annex A. TEST INSTRUMENT Instrument Model Serial # Cal Date Cal Cycle Cal Due In use Radiated Emissions Keysight EXA 44GHz Spectrum N9030B(PXA) MY57140374 09/06/2018 1 Year 09/06/2019 Analyzer Bi-Log antenna (30MHz~2GHz) JB1 A030702 03/09/2018 1 Year 03/09/2019 Horn Antenna (1GHz~26GHz) 3115 100059 11/09/2018 1 Year 11/09/2019 Horn Antenna (18GHz~40GHz) PA-840 181251 06/23/2018 1 Year 06/23/2019 Preamplifier (100KHz-7GHz) LPA-6-30 11170602 05/09/2018 1 Year 05/09/2019 Pre-Amplifier (1-26.5GHz) 8449B 3008A00715 08/16/2018 1 Year 08/16/2019 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 N Page 16 of 17 Annex A. SIEMIC Accreditation Accreditations Document Scope / Remark ISO 17025 (A2LA) Please see the documents for the detailed scope ISO Guide 65 (A2LA) Please see the documents for the detailed scope TCB Designation A1, A2, A3, A4, B1, B2, B3, B4, C FCC DoC Accreditation FCC Declaration of Conformity Accreditation FCC Site Registration 3 meter site FCC Site Registration 10 meter site IC Site Registration 3 meter site IC Site Registration 10 meter site Radio Equipment: EN45011: EN ISO/IEC 17065 EU NB Electromagnetic Compatibility: EN45011 – EN ISO/IEC 17065 Singapore iDA Phase I, Phase II CB(Certification Body) Vietnam MIC Please see the document for the detailed scope CAB Accreditation (Phase II) OFCA Foreign Certification Body for Radio and Telecom Hong Kong OFCA (Phase I) Conformity Assessment Body for Radio and Telecom Radio: Scope A – All Radio Standard Specification in Category I Industry Canada CAB Telecom: CS-03 Part I, II, V, VI, VII, VIII 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report FCC_IC_RF_SL18102402-ZBR-062_Co-Location_Rev1.0 N Page 17 of 17 Radio: A1. Terminal equipment for purpose of calling Japan Recognized Certification Telecom: B1. Specified radio equipment specified in Article 38-2, Paragraph 1, Item Body Designation 1 of the Radio Law EMI: KCC Notice 2008-39, RRL Notice 2008-3: CA Procedures for EMI KN22: Test Method for EMI EMS: KCC Notice 2008-38, RRL Notice 2008-4: CA Procedures for EMS KN24, KN61000-4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11: Test Method for EMS Korea CAB Accreditation Radio: RRL Notice 2008-26, RRL Notice 2008-2, RRL Notice 2008-10, RRL Notice 2007-49, RRL Notice 2007-20, RRL Notice 2007-21, RRL Notice 2007- 80, RRL Notice 2004-68 Telecom: President Notice 20664, RRL Notice 2007-30, RRL Notice 2008-7 with attachments 1, 3, 5, 6; President Notice 20664, RRL Notice 2008-7 with attachment 4 LP0002, PSTN01, ADSL01, ID0002, IS6100, CNS14336, PLMN07, PLMN01, Taiwan NCC CAB Recognition PLMN08 Taiwan BSMI CAB Recognition CNS 13438 R-3083: Radiation 3 meter site Japan VCCI C-3421: Main Ports Conducted Interference Measurement T-1597: Telecommunication Ports Conducted Interference Measurement EMC: AS/NZS CISPR 11, AS/NZS CISPR 14.1, AS/NZS CISPR22, AS/NZS 61000.6.3, AS/NZS 61000.6.4 Radiocommunications: AS/NZS 4281, AS/NZS 4268, AS/NZS 4280.1, AS/NZS 4280.2, AS/NZS 4295, AS/NZS 4582, AS/NZS 4583, AS/NZS 4769.1, Australia CAB Recognition AS/NZS 4769.2, AS/NZS 4770, AS/NZS 4771 Telecommunications: AS/ACIF S002:05, AS/ACIF S003:06, AS/ACIF S004:06 AS/ACIF S006:01, AS/ACIF S016:01, AS/ACIF S031:01, AS/ACIF S038:01, AS/ACIF S040:01, AS/ACIF S041:05, AS/ACIF S043.2:06, AS/ACIF S60950.1 AS/ACIF S002, AS/ACIF S003, AS/ACIF S004, AS/ACIF S006, AS/ACIF Australia NATA Recognition S016,AS/ACIF S031, AS/ACIF S038, AS/ACIF S040, AS/ACIF S041, AS/ACIF S043.2 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:


Document Created: 2018-12-28 10:42:54
Document Modified: 2018-12-28 10:42:54
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC