Co-Location Test Report

FCC ID: I28-M6ENANO

Test Report

Download: PDF
FCCID_4177185

RF TEST REPORT Report No.: FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Supersede Report No.: FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation Applicant : Zebra Technologies Corporation Host Product Name : Thermal Label Printer Module Model No. (AC Radio) : WYSBHVGXG Module Model No. (UHF RFID) M6E-NANO Host Model No. : ZQ630 47 CFR 15.247 Test Standard : RSS247 Issue 2, 2017 ANSI C63.10: 2013 Test Method : RSS Gen Iss 4: Nov 2014 558074 D01 DTS Meas Guidance v04 FCC ID (AC Radio) : I28MD-FXLAN11AC IC (AC Radio) : 3798B-FXLAN11AC FCC ID (UHF RFID Module) : 128-M6ENANO IC (UHF RFID Module) : 3798B-M6ENANO Dates of test : 11/28/2018 -11/30/2018 Issue Date : 02/06/2019 Test Result : ☒ Pass ☐ Fail Equipment complied with the specification [X] Equipment did not comply with the specification [ ] This Test Report is Issued Under the Authority of: Cipher Chen Ge Test Engineer Engineer Reviewer Issued By: SIEMIC Laboratories 775 Montague Expressway, Milpitas, 95035 CA 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 2 of 20 Laboratory Introduction SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management throughout a project. Our extensive experience with China, Asia Pacific, North America, European, and International compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets. Accreditations for Conformity Assessment Country/Region Accreditation Body Scope USA FCC, A2LA EMC, RF/Wireless, Telecom Canada IC, A2LA, NIST EMC, RF/Wireless, Telecom Taiwan BSMI, NCC, NIST EMC, RF, Telecom, Safety Hong Kong OFTA, NIST RF/Wireless, Telecom Australia NATA, NIST EMC, RF, Telecom, Safety Korea KCC/RRA, NIST EMI, EMS, RF, Telecom, Safety Japan VCCI, JATE, TELEC, RFT EMI, RF/Wireless, Telecom Mexico NOM, COFETEL, Caniety Safety, EMC, RF/Wireless, Telecom Europe A2LA, NIST EMC, RF, Telecom, Safety Israel MOC, NIST EMC, RF, Telecom, Safety Accreditations for Product Certifications Country Accreditation Body Scope USA FCC TCB, NIST EMC, RF, Telecom Canada IC FCB, NIST EMC, RF, Telecom Singapore iDA, NIST EMC, RF, Telecom EU NB EMC & Radio Equipment Directive (RED) Japan MIC (RCB 208) RF, Telecom Hong Kong OFTA (US002) RF, Telecom 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 3 of 20 CONTENTS 1 REPORT REVISION HISTORY .......................................................................................................................................4 2 EXECUTIVE SUMMARY.................................................................................................................................................5 3 CUSTOMER INFORMATION ..........................................................................................................................................5 4 TEST SITE INFORMATION ............................................................................................................................................5 5 MODIFICATION .............................................................................................................................................................5 6 EUT INFORMATION ......................................................................................................................................................6 6.1 EUT Description ........................................................................................................................................................6 6.2 Spec for Radio ..........................................................................................................................................................6 7 SUPPORTING EQUIPMENT/SOFTWARE AND CABLING DESCRIPTION .........................................................................9 7.1 Supporting Equipment ...............................................................................................................................................9 7.2 Cabling Description ...................................................................................................................................................9 7.3 Test Software Description ..........................................................................................................................................9 8 TEST SUMMARY ......................................................................................................................................................... 10 9 MEASUREMENT UNCERTAINTY ................................................................................................................................. 11 9.1 Conducted Emissions .............................................................................................................................................. 11 9.2 Radiated Emissions (30MHz to 1GHz) ....................................................................................................................... 11 9.3 Radiated Emissions (1GHz to 40GHz) ....................................................................................................................... 12 9.4 RF conducted measurement..................................................................................................................................... 12 10 MEASUREMENTS, EXAMINATION AND DERIVED RESULTS .................................................................................. 13 10.1 Antenna Requirement.......................................................................................................................................... 13 10.2 Radiated Spurious Emissions below 1GHz ............................................................................................................ 14 10.3 Radiated Spurious Emissions between 1GHz – 25GHz .......................................................................................... 16 ANNEX A. TEST INSTRUMENT ........................................................................................................................................... 18 ANNEX B. SIEMIC ACCREDITATION ................................................................................................................................... 19 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 4 of 20 1 Report Revision History Report Report No. Description Issue Date Version FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation None Original 01/29/2019 Updated as per reviewer's FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Rev1.0 02/06/2019 comments 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 5 of 20 2 Executive Summary The purpose of this test program was to demonstrate compliance of following product Company: Zebra Technologies Corporation Host Product: Thermal Label Printer Host Model No.: ZQ630 against the current Stipulated Standards. The specified model product stated above has demonstrated compliance with the Stipulated Standard listed on 1st page. 3 Customer information Applicant Name Zebra Technologies Corp. Applicant Address 3 Overlook Point, Lincolnshire, IL 60069 Manufacturer Name Zebra Technologies Corp. Manufacturer Address 3 Overlook Point, Lincolnshire, IL 60069 4 Test site information Lab performing tests SIEMIC Laboratories Lab Address 775 Montague Expressway, Milpitas, CA 95035 FCC Test Site No. 540430 IC Test Site No. 4842D-2 VCCI Test Site No. A0133 5 Modification Index Item Description Note - - - - 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 6 of 20 6 EUT Information 6.1 EUT Description Host Product Name Thermal Label Printer Host Model No. ZQ630 Trade Name Zebra Serial No. N/A Input Power 100-240VAC,50/60Hz Power Adapter Manu/Model FSP025-DYAA3 Power Adapter SN N/A Product Hardware version N/A Product Software version N/A Radio Hardware version N/A Radio Software version N/A Date of EUT received 11/28/2018 Equipment Class/ Category DTS,UNII,RFID Port/Connectors USB Remark NONE 6.2 Spec for Radio UHF RFID: Radio Type UHF RFID Radio Module M6E-NANO Operating Frequency 902-928 MHz Modulation ASK Radio type RFID Number of Channels 50 Antenna Type Loop/Coil Antenna Gain -28 dBi 21.68 dBm Maximum conducted power See FCC_IC_RF_SL18100302-ZBR-057 pg21 Maximum EIRP -8.32 dBm BLE: Radio Type Bluetooth Radio Module WYSBHVGXG Operating Frequency 2402MHz-2480MHz Modulation GFSK (LE) Channel Spacing 2MHz (LE) Antenna Type Patch Antenna Antenna Gain 3.66dBi (for 2.4GHz) Antenna Connector Type U.FL connector 8.43 dBm Maximum conducted power See FCC_RF_SL15072901-ZBR-024_DTS_Rev.2.0 pg28 Maximum EIRP 12.09 dBm 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 7 of 20 BT: Radio Type Bluetooth (Ver4.0+EDR) Rdaio Module WYSBHVGXG Operating Frequency 2402MHz-2480MHz Modulation FHSS (BDR, EDR) Channel Spacing 1MHz (BDR, EDR) Antenna Type Patch Antenna Antenna Gain 3.66 dBi Antenna Connector Type U.FL connector 10.27 dBm Maximum conducted power See FCC_RF_SL15072901-ZBR-024_DSS Rev.3.0 pg28 Maximum EIRP 13.93 dBm 2.4 GHz Radio Type 802.11b 802.11g 802.11n-20M 802.11n-40M Rdaio Module WYSBHVGXG Operating 2412-2462MHz 2412-2462MHz 2412-2462MHz 2422-2452MHz Frequency DSSS OFDM-CCK (BPSK, OFDM (BPSK, QPSK, OFDM (BPSK, QPSK, Modulation (CCK, DQPSK, DBPSK) QPSK, 16QAM, 64QAM) 16QAM, 64QAM) 16QAM, 64QAM) Channel Spacing 5MHz 5MHz 5MHz 5MHz Number of 11 11 11 7 Channels Antenna Type Patch Antenna Antenna Gain 2.4GHz: 3.66 dBi (Peak) Antenna U.FL connector Connector Type Note - Maximum 16.77 dBm conducted power See FCC_IC_RF_SL15072901-ZBR-024_DTS_2.4G Rev. 2.0 pg26 Maximum EIRP 20.43 dBm 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 8 of 20 5 GHz: Radio Type 802.11a 802.11n-20M 802.11n-40M 802.11ac-80M Rdaio Module WYSBHVGXG 5180-5240MHz 5180-5240MHz 5190-5230MHz 5210MHz,5290MHz Operating 5260-5320MHz 5260-5320MHz 5270-5310MHz 5530MHz,5690MHz Frequency 5500-5700MHz 5500-5700MHz 5510-5670MHz 5745-5825MHz 5745-5825MHz 5755-5795MHz 5775MHz OFDM (BPSK, QPSK, OFDM (BPSK, QPSK, OFDM (BPSK, QPSK, OFDM (BPSK, QPSK, Modulation 16QAM, 64QAM, 16QAM, 64QAM) 16QAM, 64QAM) 16QAM, 64QAM) 256QAM) Channel Spacing 20MHz 20MHz 40MHz 80MHz Number of 24 24 11 5 Channels Antenna Type Patch Antenna Antenna Gain 3.19dBi (5GHz) (Peak) Antenna Connector U.FL connector Type Note - Maximum 13.95 dBm conducted power See FCC _RF_SL15072901-ZBR-024_UNII_5G Rev. 2.0 pg29 Maximum EIRP 17.14 dBm 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 9 of 20 7 Supporting Equipment/Software and cabling Description 7.1 Supporting Equipment Supporting Equipment Item Model Serial Number Manufacturer Note Description 1 Laptop LATITUDE E5410 N/A Dell - 7.2 Cabling Description Connection Start Connection Stop Length / shielding Info Name Note From I/O Port To I/O Port Length (m) Shielding USB USB EUT USB Laptop USB 2 Unshielded 7.3 Test Software Description Test Item Software Description RF Testing Zebra Toolbox Set the EUT to transmit continuously in diferent test mode 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 10 of 20 8 Test Summary Test Item Test standard Test Method/Procedure Pass / Fail FCC 15.203 FCC ANSI C63.10 – 2013 ☒ Pass Antenna Requirement IC - IC 558074 D01 DTS Meas. Guidance v03r02 ☐ N/A Restricted Band of FCC 15.205 FCC ANSI C63.10:2013 ☒ Pass Operation IC RSS Gen 8.10 IC 558074 D01 DTS Meas Guidance v04 ☐ N/A FCC 15.207(a) FCC ANSI C63.10:2013 ☒ Pass* AC Conducted Emissions IC RSS Gen 8.8 IC RSS Gen Issue 4: 2014 ☐ N/A DTS Band Requirement Test Item Test standard Test Method/Procedure Pass / Fail 99% Occupied - - - - ☒ Pass* Bandwidth IC RSS Gen 6.6 IC RSS Gen Issue 4: 2014 ☐ N/A FCC 15.247(a)(2) FCC ☒ Pass* 6dB Bandwidth 558074 D01 DTS Meas Guidance v04 IC RSS247 (5.2.1) IC ☐ N/A Band Edge and FCC 15.247(d) FCC ☒ Pass ANSI C63.10:2013 Radiated Spurious 558074 D01 DTS Meas Guidance v04 ☐ N/A Emissions IC RSS247 (5.5) IC FCC 15.247(b) FCC ☒ Pass * Output Power 558074 D01 DTS Meas Guidance v04 IC RSS247 (5.4.4) IC ☐ N/A Receiver Spurious ☐ Pass IC RSS Gen (4.8) IC RSS Gen Issue 4: 2014 Emissions ☒ N/A Antenna Gain > 6 FCC 15.247(e) FCC - ☐ Pass dBi IC - IC - ☒ N/A Power Spectral FCC 15.247(e) FCC ☒ Pass* 558074 D01 DTS Meas Guidance v04 Density IC RSS247 (5.2.2) IC ☐ N/A RF Exposure FCC 15.247(i) FCC - ☐ Pass requirement IC RSS Gen(5.5) IC RSS Gen Issue 4: 2014 ☒ N/A 1. All measurement uncertainties do not take into consideration for all presented test results. Remark 2. The applicant shall ensure frequency stability by showing that an emission is maintained within the band of operation under all normal operating conditions as specified in the user’s manual. 3. Pass* : Please refer to FCC_IC_RF_SL15072901-ZBR-024 and FCC_IC_RF_SL18100302-ZBR-057 test report. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 11 of 20 9 Measurement Uncertainty 9.1 Conducted Emissions The test is to measure the conducted emissions to the mains port of the EUT. Some error sources that can contribute to the total uncertainty: - Uncertainty of the receiver - Uncertainty of the LISN - Uncertainty of cables - Uncertainty due to the mismatches - Etc, see the below table for details Source of Uncertainty Value Probability Division Sensitivity Expanded (dB) Distribution Coefficient Uncertainty Receiver Reading 0.12 Rectangular 1.732 1 0.069284 Cable Insertion Loss 0.21 Normal 2 1 0.105 Filter Insertion Loss 0.25 Normal 2 1 0.125 LISN Insertion Loss 0.40 Normal 2 1 0.20 Receiver CW accuracy 0.5 Rectangular 1.732 1 0.2886836 Pulse Amplitude 1.5 Rectangular 1.732 1 0.86605081 Response PRF Response 1.5 Rectangular 1.732 1 0.86605081 Mismatch LISN - 0.25 U-Shape 1.414 1 0.1768033 Receiver LISN Impedance 2.5 Triangular 2.449 1 1.0208248 Combined Standard Uncertainty 1.928133 Expanded Uncertainty (K=2) 3.856266 The total derived measurement uncertainty is +/- 3.86 dB. 9.2 Radiated Emissions (30MHz to 1GHz) The test is to measure the radiated emissions of the EUT. Some error sources that can contribute to the total uncertainty: - Uncertainty of the receiver - Uncertainty of the antenna - Uncertainty of cables - Uncertainty due to the mismatches - NSA Calibration - Etc., details see the below table Value Probability Sensitivity Expanded Source of Uncertainty Division (dB) Distribution Coefficient Uncertainty Receiver Reading 0.12 Rectangular 1.732 1 0.069284 Cable Insertion Loss 0.21 Normal 2 1 0.105 Filter Insertion Loss 0.25 Normal 2 1 0.125 Antenna Factor 0.65 Normal 2 1 0.325 Receiver CW accuracy 0.5 Rectangular 1.732 1 0.2886836 Pulse Amplitude Response 1.5 Rectangular 1.732 1 0.86605081 PRF Response 1.5 Rectangular 1.732 1 0.86605081 Mismatch Filter - Receiver 0.25 U-Shape 1.414 1 0.1768033 NSA Calibration 4.0 U-Shape 1.414 1 2.8288543 Combined Standard Uncertainty 3.0059131 Expanded Uncertainty (K=2) 6.0118262 The total derived measurement uncertainty is +/- 6.00 dB. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 12 of 20 9.3 Radiated Emissions (1GHz to 40GHz) The test is to measure the radiated emissions of the EUT. Some error sources that can contribute to the total uncertainty: - Uncertainty of the receiver - Uncertainty of the antenna - Uncertainty of cables - Uncertainty due to the mismatches - VSWR Calibration - Etc., details see the below table Value Probability Sensitivity Expanded Source of Uncertainty Division (dB) Distribution Coefficient Uncertainty Receiver Reading 0.12 Rectangular 1.732 1 0.0692840 Cable Insertion Loss 0.21 Normal 2 1 0.1050000 Filter Insertion Loss 0.25 Normal 2 1 0.1250000 Antenna Factor 0.65 Normal 2 1 0.3250000 Receiver CW accuracy 0.5 Rectangular 1.732 1 0.2886836 Pulse Amplitude Response 1.5 Rectangular 1.732 1 0.8660508 PRF Response 1.5 Rectangular 1.732 1 0.8660508 Mismatch Filter - Receiver 0.25 U-Shape 1.414 1 0.1768033 VSWR Calibration 2.0 U-Shape 1.414 1 1.4144272 Combined Standard Uncertainty 4.2363 Expanded Uncertainty (K=2) 8.4726 The total derived measurement uncertainty is +/- 8.47 dB. 9.4 RF conducted measurement The test is to measure the RF output power from the EUT. Some error sources that can contribute to the total uncertainty: - Uncertainty of the Reference Level Uncertainty - Uncertainty of variable attenuators - Uncertainty of cables - Uncertainty due to the mismatches Value Probability Division Sensitivity Expanded Source of Uncertainty (dB) Distribution Coefficient Uncertainty Reference Level 0.12 Rectangular 1.732 1 0.069284 Cable Insertion Loss 0.21 Normal 2 1 0.105 Attenuator 0.25 Normal 2 1 0.125 Mismatch 0.25 U-Shape 1.414 1 0.1768033 Combined Standard Uncertainty 0.476087 Expanded Uncertainty (K=2) 0.952174 The total derived measurement uncertainty is +/- 0.95 dB. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 13 of 20 10 Measurements, Examination and Derived Results 10.1 Antenna Requirement Spec Requirement Applicable An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. Antenna requirement must meet at least one of the following: §15.203 ☒ a) Antenna must be permanently attached to the device. b) The antenna must use a unique type of connector to attach to the device. c) Device must be professionally installed. The installer shall be responsible for ensuring that the correct antenna is employed by the device. Remark The device has a unique coupling connector attached to the device, RP-SMA Result ☒ PASS ☐ FAIL 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 14 of 20 10.2 Radiated Spurious Emissions below 1GHz Requirement(s): Spec Item Requirement Applicable Except higher limit as specified elsewhere in other section, the emissions from the low-power radio-frequency devices shall not exceed the field strength levels specified in the following table and the level of any unwanted emissions shall not exceed the level of the fundamental emission. The tighter limit applies at the band 47CFR§15.247(d) edges ☒ a) RSS247 (5.5) Frequency range (MHz) Field Strength (uV/m) 30 – 88 100 88 – 216 150 216 960 200 Above 960 500 Test Setup 1. The EUT was switched on and allowed to warm up to its normal operating condition. 2. The test was carried out at the selected frequency points obtained from the EUT characterisation. Maximization of the emissions, was carried out by rotating the EUT, changing the antenna polarization, and adjusting the antenna height in the following manner: a. Vertical or horizontal polarisation (whichever gave the higher emission level over a full Procedure rotation of the EUT) was chosen. b. The EUT was then rotated to the direction that gave the maximum emission. c. Finally, the antenna height was adjusted to the height that gave the maximum emission. 3. A Quasi-peak measurement was then made for that frequency point. 4. Steps 2 and 3 were repeated for the next frequency point, until all selected frequency points were measured. The EUT was scanned up to 1GHz. Both horizontal and vertical polarities were investigated. The results Remark show only the worst case. Result ☒ Pass ☐ Fail Test Data ☒ Yes (See below) ☐ N/A Test Plot ☒ Yes (See below) ☐ N/A Test was done by Cipher at 10m chamber. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 15 of 20 Radiated Emission Test Results (Below 1GHz) Test specification Below 1GHz Temp (°C): 20 Environmental Conditions: Humidity (%) 38 Atmospheric (mbar): 1019 Result Pass Mains Power: 120VAC,60Hz Tested by: Cipher Test Date: 11/29/2018 Remarks: RFID+Bluetooth+802.11ac Fundamental 30MHz – 1000MHz at 3 meters Frequency Raw Cable AF Level Measurement Hgt Azt Limit Margin Pass Pol MHz dBuV Loss dB dBuV/m Type cm Deg dBuV/m dB /Fail 32.67 20.04 11.15 -14.56 16.63 Quasi Max V 189 20 40 -23.37 Pass 30.00 20.20 11.12 -12.08 19.23 Quasi Max V 133 154 40 -20.77 Pass 128.87 17.34 12.16 -22.73 6.78 Quasi Max V 138 357 43.5 -36.73 Pass 891.65 22.51 15.95 -13.6 24.86 Quasi Max V 129 286 46 -21.14 Pass 597.07 20.50 14.70 -16.75 18.46 Quasi Max V 266 102 46 -27.54 Pass 511.51 20.34 14.29 -17.92 16.71 Quasi Max V 300 212 46 -29.29 Pass Note: Both horizontal and vertical polarities were investigated. The results above show only the worst case. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 16 of 20 10.3 Radiated Spurious Emissions between 1GHz – 25GHz Requirement(s): Spec Item Requirement Applicable For non-restricted band, In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB or 30dB below that in the 100 kHz bandwidth within the band that ☒ a) contains the highest level of the desired power, determined by the measurement 47CFR§15.247(d), method on output power to be used. Attenuation below the general limits RSS247(A8.5) specified in § 15.209(a) is not required ☐ 20 dB down ☒ 30 dB down or restricted band, emission must also comply with the radiated emission limits b) ☒ specified in 15.209 Test Setup 1. The EUT was switched on and allowed to warm up to its normal operating condition. 2. The test was carried out at the selected frequency points obtained from the EUT characterisation. Maximization of the emissions, was carried out by rotating the EUT, changing the antenna polarization, and adjusting the antenna height in the following manner: a. Vertical or horizontal polarisation (whichever gave the higher emission level over a full Procedure rotation of the EUT) was chosen. b. The EUT was then rotated to the direction that gave the maximum emission. c. Finally, the antenna height was adjusted to the height that gave the maximum emission. 3. An average measurement was then made for that frequency point. 4. Steps 2 and 3 were repeated for the next frequency point, until all selected frequency points were measured. Remark Both horizontal and vertical polarities were investigated. The results show only the worst case. Result ☒ Pass ☐ Fail Test Data ☒ Yes (See below) ☐ N/A Test Plot ☐ Yes (See below) ☒ N/A Test was done by Cipher at 10m chamber. 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 17 of 20 Radiated Emission Test Results (Above 1GHz) RFID+Bluetooth+802.11ac Frequency Raw Cable AF Level Measurement Hgt Azt Limit Margin Pass Pol MHz dBuV Loss dB dBuV/m Type cm Deg dBuV/m dB /Fail 7134.28 50.59 5.11 -7.7 48 Peak Max V 350 100 74 -26 Pass 11127.98 41.95 6.08 -3.11 44.92 Peak Max H 105 22 74 -29.08 Pass 4822.28 48.93 4.12 -10.92 42.13 Peak Max H 303 93 74 -31.87 Pass 7134.28 35.79 5.11 -7.7 33.2 Average Max V 350 100 54 -20.8 Pass 11127.98 29.46 6.08 -3.11 32.43 Average Max H 105 22 54 -21.57 Pass 4822.28 36.25 4.12 -10.92 29.45 Average Max H 303 93 54 -24.55 Pass 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 18 of 20 Annex A. TEST INSTRUMENT Instrument Model Serial # Cal Date Cal Cycle Cal Due In use Radiated Emissions EMI Test Receiver ESIB 40 100179 06/08/2018 1 Year 06/08/2019 Bi-Log antenna (30MHz~2GHz) JB1 A030702 03/09/2018 2 Year 03/09/2020 Horn Antenna (1-18GHz) 3115 10SL0059 01/26/2018 2 Year 01/26/2020 Horn Antenna (18-40 GHz) AH-840 101013 08/28/2018 1 Year 08/28/2019 Tuned Dipole Antenna Set AD-100 40133:40149 03/08/2018 1 Year 03/08/2019 Pre-Amplifier LPA-6-30 11140711 02/08/2018 1 Year 02/10/2019 Pre-Amplifier (1-26.5GHz) 8449B 3008A00715 03/30/2018 1 Year 03/30/2019 Agilent Signal Generator MXG N5182A MY47071065 04/06/2018 1 Year 04/06/2019 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 19 of 20 Annex B. SIEMIC Accreditation Accreditations Document Scope / Remark ISO 17025 (A2LA) Please see the documents for the detailed scope ISO Guide 65 (A2LA) Please see the documents for the detailed scope TCB Designation A1, A2, A3, A4, B1, B2, B3, B4, C FCC DoC Accreditation FCC Declaration of Conformity Accreditation FCC Site Registration 3 meter site FCC Site Registration 10 meter site IC Site Registration 3 meter site IC Site Registration 10 meter site Radio & Telecommunications Terminal Equipment: EN45001 – EN ISO/IEC 17025 EU NB Electromagnetic Compatibility: EN45001 – EN ISO/IEC 17025 Singapore iDA Phase I, Phase II CB(Certification Body) Vietnam MIC Please see the document for the detailed scope CAB Accreditation (Phase II) OFCA Foreign Certification Body for Radio and Telecom Hong Kong OFCA (Phase I) Conformity Assessment Body for Radio and Telecom Radio: Scope A – All Radio Standard Specification in Category I Industry Canada CAB Telecom: CS-03 Part I, II, V, VI, VII, VIII 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:

Test report No. FCC_IC_RF_SL18100302-ZBR-057-ZQ630-Collocation_Rev1.0 Page 20 of 20 Radio: A1. Terminal equipment for purpose of calling Japan Recognized Certification Telecom: B1. Specified radio equipment specified in Article 38-2, Paragraph 1, Item Body Designation 1 of the Radio Law EMI: KCC Notice 2008-39, RRL Notice 2008-3: CA Procedures for EMI KN22: Test Method for EMI EMS: KCC Notice 2008-38, RRL Notice 2008-4: CA Procedures for EMS KN24, KN61000-4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11: Test Method for EMS Korea CAB Accreditation Radio: RRL Notice 2008-26, RRL Notice 2008-2, RRL Notice 2008-10, RRL Notice 2007-49, RRL Notice 2007-20, RRL Notice 2007-21, RRL Notice 2007- 80, RRL Notice 2004-68 Telecom: President Notice 20664, RRL Notice 2007-30, RRL Notice 2008-7 with attachments 1, 3, 5, 6; President Notice 20664, RRL Notice 2008-7 with attachment 4 LP0002, PSTN01, ADSL01, ID0002, IS6100, CNS14336, PLMN07, PLMN01, Taiwan NCC CAB Recognition PLMN08 Taiwan BSMI CAB Recognition CNS 13438 R-3083: Radiation 3 meter site Japan VCCI C-3421: Main Ports Conducted Interference Measurement T-1597: Telecommunication Ports Conducted Interference Measurement EMC: AS/NZS CISPR 11, AS/NZS CISPR 14.1, AS/NZS CISPR22, AS/NZS 61000.6.3, AS/NZS 61000.6.4 Radio communications: AS/NZS 4281, AS/NZS 4268, AS/NZS 4280.1, AS/NZS 4280.2, AS/NZS 4295, AS/NZS 4582, AS/NZS 4583, AS/NZS 4769.1, Australia CAB Recognition AS/NZS 4769.2, AS/NZS 4770, AS/NZS 4771 Telecommunications: AS/ACIF S002:05, AS/ACIF S003:06, AS/ACIF S004:06 AS/ACIF S006:01, AS/ACIF S016:01, AS/ACIF S031:01, AS/ACIF S038:01, AS/ACIF S040:01, AS/ACIF S041:05, AS/ACIF S043.2:06, AS/ACIF S60950.1 AS/ACIF S002, AS/ACIF S003, AS/ACIF S004, AS/ACIF S006, AS/ACIF Australia NATA Recognition S016,AS/ACIF S031, AS/ACIF S038, AS/ACIF S040, AS/ACIF S041, AS/ACIF S043.2 775 Montague Expressway, Milpitas, CA 95035, USA • Phone: (+1) 408 526 1188 • Facsimile (+1) 408 526 1088 Visit us at: www.siemic.com; Follow us at:


Document Created: 2019-02-14 17:02:08
Document Modified: 2019-02-14 17:02:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC