Test report

FCC ID: HV4DTH1620

Test Report

Download: PDF
FCCID_3304480

FCC Test Report Report No. : FR6O0419 FCC Test Report Equipment : LCD Tablet Brand Name : Wacom Model No. : DTH-1620 FCC ID : HV4DTH1620 Standard : 47 CFR FCC Part 15.209 RF Specification : SRD Operating Band : 667kHz FCC Classification : DCD Applicant / : Wacom Co., Ltd. Manufacturer 2-510-1 Toyonodai, Kazo-shi, Saitama 349-1148 Japan The product sample received on Oct. 05, 2016 and completely tested on Oct. 18, 2016. We, SPORTON, would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.10-2013 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Phoenix Chen / Assistant Manager SPORTON INTERNATIONAL INC. Page No. : 1 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 Testing Applied Standards ..................................................................................................................... 6 1.3 Testing Location Information .................................................................................................................. 6 1.4 Measurement Uncertainty ...................................................................................................................... 7 2 TEST CONFIGURATION OF EUT......................................................................................................... 8 2.1 The Worst Case Modulation Configuration ............................................................................................ 8 2.2 Test Channel Frequencies Configuration ............................................................................................... 8 2.3 The Worst Case Measurement Configuration ........................................................................................ 8 2.4 Accessory and Support Equipment ........................................................................................................ 9 2.5 Test Setup Diagram ............................................................................................................................. 10 3 TRANSMITTER TEST RESULT .......................................................................................................... 11 3.1 AC Power-line Conducted Emissions .................................................................................................. 11 3.2 Transmitter Radiated Emissions .......................................................................................................... 15 3.3 Emission Bandwidth ............................................................................................................................. 23 4 TEST EQUIPMENT AND CALIBRATION DATA ................................................................................ 25 APPENDIX A. TEST PHOTOS PHOTOGRAPHS OF EUT V01 SPORTON INTERNATIONAL INC. Page No. : 2 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 Summary of Test Result Conformance Test Specifications Report Ref. Std. Description Measured Limit Result Clause Clause 1.1.3 15.203 Antenna Requirement Antenna connector FCC 15.203 Complied mechanism complied 3.1 15.207 AC Power-line [dBuV]: 0.45MHz FCC 15.207 Complied Conducted Emissions 34.62 (Margin 12.31dB) - AV 43.49 (Margin 13.44dB) - QP 3.2 15.209 Transmitter Radiated [dBuV/m at 3m]: 30.00MHz FCC 15.209 Complied Emissions 15.97 (Margin 24.03dB) - QP 3.3 15.215(c) Emission Bandwidth 99% Bandwidth: 29.37 [kHz] N/A Complied 20dB Bandwidth: 33.50 [kHz] SPORTON INTERNATIONAL INC. Page No. : 3 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 Revision History Report No. Version Description Issued Date FR6O0419 Rev. 01 Initial issue of report Feb. 22, 2017 SPORTON INTERNATIONAL INC. Page No. : 4 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 1 General Description 1.1 Information 1.1.1 Product Details The difference between the report no. : N/A The Difference N/A Evaluated Test Items N/A 1.1.2 RF General Information RF General Information Frequency 667kHz Field Strength Modulation Ch. Frequency (kHz) Channel Number (dBuV/@1m) ASK 667 1 49.30 Note 1: Field strength performed peak level at 1m. 1.1.3 Antenna Information Antenna Category Integral antenna (antenna permanently attached) Temporary RF connector provided No temporary RF connector provided Transmit chains bypass antenna and soldered temporary RF connector provided for connected measurement. In case of conducted measurements the transmitter shall be connected to the measuring equipment via a suitable attenuator and correct for all losses in the RF path. External antenna (dedicated antennas) Antenna General Information No. Ant. Cat. Ant. Type 1 Integral Array Coli Pointing SPORTON INTERNATIONAL INC. Page No. : 5 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 1.1.4 Type of EUT Identify EUT EUT Serial Number N/A Presentation of Equipment Production ; Pre-Production ; Prototype Type of EUT Stand-alone Combined (EUT where the radio part is fully integrated within another device) Combined Equipment - Brand Name / Model No.: … Plug-in radio (EUT intended for a variety of host systems) Host System - Brand Name / Model No.: … Other: 1.1.5 Test Signal Duty Cycle Operated Mode for Worst Duty Cycle Operated normal mode for worst duty cycle Operated test mode for worst duty cycle Test Signal Duty Cycle (x) 100.00% 1.1.6 EUT Operational Condition Supply Voltage AC mains DC Type of DC Source External AC adapter From Battery From System 1.2 Testing Applied Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  47 CFR FCC Part 15  ANSI C63.10-2013 1.3 Testing Location Information Testing Location HWA YA ADD : No. 52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan District, Tao Yuan City, Taiwan, R.O.C. TEL : 886-3-327-3456 FAX : 886-3-327-0973 Test Site Registration Number: 553509 Test Condition Test Site No. Test Engineer Test Environment Test Date AC Conduction CO04-HY Ryan 23°C / 60% 18/10/2016 RF Conducted TH01-HY Lisa 23°C / 63% 12/10/2016 Radiated Emission 03CH03-HY Jeff 24.1°C / 54% 12/10//2016 Test Site Registration Number: 553509 SPORTON INTERNATIONAL INC. Page No. : 6 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 1.4 Measurement Uncertainty ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2) Measurement Uncertainty Test Item Uncertainty AC power-line conducted emissions ±2.3 dB Emission bandwidth, 6dB bandwidth ±0.6 % RF output power, conducted ±0.1 dB Power density, conducted ±0.6 dB Unwanted emissions, conducted 9 – 150 kHz ±0.4 dB 0.15 – 30 MHz ±0.4 dB 30 – 1000 MHz ±0.6 dB 1 – 18 GHz ±0.5 dB 18 – 40 GHz ±0.5 dB 40 – 200 GHz N/A All emissions, radiated 9 – 150 kHz ±2.5 dB 0.15 – 30 MHz ±2.3 dB 30 – 1000 MHz ±2.6 dB 1 – 18 GHz ±3.6 dB 18 – 40 GHz ±3.8 dB 40 – 200 GHz N/A Temperature ±0.8 °C Humidity ±5 % DC and low frequency voltages ±0.9 % Time ±1.4 % Duty Cycle ±0.6 % SPORTON INTERNATIONAL INC. Page No. : 7 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 2 Test Configuration of EUT 2.1 The Worst Case Modulation Configuration Transmitter Mode Field Strength (dBuV/m@1m) Field Strength (dBuV/m@3m) Touch Pen 49.30 30.22 2.2 Test Channel Frequencies Configuration Modulation Test Channel Frequencies (kHz) ASK 667 2.3 The Worst Case Measurement Configuration The Worst Case Mode for Following Conformance Tests Tests Item AC power-line conducted emissions Condition AC power-line conducted measurement for line and neutral Test Voltage: 120Vac / 60Hz Operating Mode Operating Mode Description 1 Adapter Mode The Worst Case Mode for Following Conformance Tests Tests Item Emission Bandwidth, Field Strength of Fundamental Emissions Transmitter Radiated Unwanted Emissions Test Condition Radiated measurement EUT will be placed in fixed position. EUT will be placed in mobile position and operating multiple positions. User Position EUT shall be performed three orthogonal planes. EUT will be a hand-held or body-worn battery-powered devices and operating multiple positions. Operating Mode Operating Mode Description 1 Adapter Mode Transmitter Mode Touch Pen X Plane Y Plane Z Plane Orthogonal Planes of EUT Worst Planes of EUT V SPORTON INTERNATIONAL INC. Page No. : 8 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 2.4 Accessory and Support Equipment Accessories Information Brand Name WACOM Model Name ADP-45XE B I/P: 100-240Vac, 50-60Hz, 1.2A, AC Adapter Power Rating O/P: 20Vdc, 2.2.5A or 15Vdc, 3A or 9Vdc, 3A or 5Vdc, 3A Power Cord 1.75 meter, non-shielded cable, w/o ferrite core Brand Name ACON Model Name STJ-A368 Type-C USB Cable Signal Line 1 meter, non-shielded cable, with w/o ferrite core Brand Name ACON Model Name STJ-A370 USB cable Signal Line 1.8 meter, non-shielded cable, with w/o ferrite core Mini DP to Mini DP Brand Name ACON Model Name STJ-A369 cable Signal Line 1.8 meter, non-shielded cable, with w/o ferrite core LCD Panel Brand Name BOE Model Name WAP1551-01 Touch Pen Brand Name Wacom Model Name KP-504E-00 Dongle Brand Name Wacom Model Name INF-A123 Note: Regarding to more detail and other information, please refer to user manual. Support Equipment – RF Conducted No. Equipment Brand Name Model Name 1 - - - Support Equipment – AC Line Conducted Emission No. Equipment Brand Name Model Name 1 - - - Support Equipment – Radiated Emission No. Equipment Brand Name Model Name 1 - - - SPORTON INTERNATIONAL INC. Page No. : 9 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 2.5 Test Setup Diagram Test Setup Diagram – AC Line Conducted Emission Test Test Setup Diagram - Radiated Test SPORTON INTERNATIONAL INC. Page No. : 10 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 3 Transmitter Test Result 3.1 AC Power-line Conducted Emissions 3.1.1 AC Power-line Conducted Emissions Limit AC Power-line Conducted Emissions Limit Frequency Emission (MHz) Quasi-Peak Average 0.15-0.5 66 - 56 * 56 - 46 * 0.5-5 56 46 5-30 60 50 Note 1: * Decreases with the logarithm of the frequency. 3.1.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. 3.1.3 Test Procedures Test Method Refer as ANSI C63.10-2013, clause 6.2 for AC power-line conducted emissions. If AC conducted emissions fall in operating band, then following below test method confirm final result. Accept measurements done with a suitable dummy load replacing the antenna under the following conditions: (1) Perform the AC line conducted tests with the antenna connected to determine compliance with FCC 15.207 limits outside the transmitter's fundamental emission band; (2) Retest with a dummy load to determine compliance with FCC 15.207 limits within the transmitter's fundamental emission band. For a device with a permanent antenna operating at or below 30 MHz, accept measurements done with a suitable dummy load, in lieu of the permanent antenna under the following conditions: (1) Perform the AC line conducted tests with the permanent antenna to determine compliance with the FCC 15.207 limits outside the transmitter's fundamental emission band; (2) Retest with a dummy load in lieu of the permanent antenna to determine compliance with the FCC 15.207 limits within the transmitter's fundamental emission band. SPORTON INTERNATIONAL INC. Page No. : 11 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 3.1.4 Test Setup AC Power-line Conducted Emissions SPORTON INTERNATIONAL INC. Page No. : 12 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 3.1.5 Test Result of AC Power-line Conducted Emissions AC Power-line Conducted Emissions Result Operating Mode 1 Power Phase Neutral Ch. Frequency (kHz) 667 Note 1: “>20dB” means emission levels that exceed the level of 20 dB below the applicable limit. Note 2: “N/F” means Nothing Found emissions (No emissions were detected.) Note 3: When emissions are in operating band over limits, retest with a dummy load for final in-band results. SPORTON INTERNATIONAL INC. Page No. : 13 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 AC Power-line Conducted Emissions Result Operating Mode 1 Power Phase Line Ch. Frequency (kHz) 667 Note 1: “>20dB” means emission levels that exceed the level of 20 dB below the applicable limit. Note 2: “N/F” means Nothing Found emissions (No emissions were detected.) Note 3: When emissions are in operating band over limits, retest with a dummy load for final in-band results. SPORTON INTERNATIONAL INC. Page No. : 14 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 3.2 Transmitter Radiated Emissions 3.2.1 Transmitter Radiated Emissions Limit Transmitter Radiated Emissions Limit Frequency Range (MHz) Field Strength (uV/m) Field Strength (dBuV/m) Measure Distance (m) 0.009~0.490 2400/F(kHz) 48.5 - 13.8 300 0.490~1.705 24000/F(kHz) 33.8 - 23 30 1.705~30.0 30 29 30 30~88 100 40 3 88~216 150 43.5 3 216~960 200 46 3 Above 960 500 54 3 Note 1: Test distance for frequencies at or above 30 MHz, measurements may be performed at a distance other than the limit distance provided they are not performed in the near field and the emissions to be measured can be detected by the measurement equipment. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor of 20 dB/decade (inverse of linear distance for field-strength measurements, inverse of linear distance-squared for power-density measurements). Note 2: Test distance for frequencies at below 30 MHz, measurements may be performed at a distance closer than the EUT limit distance; however, an attempt should be made to avoid making measurements in the near field. When performing measurements below 30 MHz at a closer distance than the limit distance, the results shall be extrapolated to the specified distance by either making measurements at a minimum of two or more distances on at least one radial to determine the proper extrapolation factor or by using the square of an inverse linear distance extrapolation factor (40 dB/decade). The test report shall specify the extrapolation method used to determine compliance of the EUT. Note 3: the frequency bands 9-90 kHz, 110-490 kHz measurements employing an average detector and other below 1GHz measurements employing a CISPR quasi-peak detector. 3.2.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. SPORTON INTERNATIONAL INC. Page No. : 15 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 3.2.3 Test Procedures Test Method Refer as ANSI C63.10, clause 6.5 for radiated emissions from 30 MHz to 1 GHz and test distance is 3m. Refer as ANSI C63.10, clause 6.4 for radiated emissions from below 30 MHz. The frequency bands 9-90 kHz, 110-490 kHz measurements employing an average detector and other below 30MHz measurements employing a CISPR quasi-peak detector. Test distance is 3m. At frequencies below 30 MHz, measurements may be performed at a distance closer than that specified in the requirements; however, an attempt should be made to avoid making measurements in the near field. Pending the development of an appropriate measurement procedure for measurements performed below 30 MHz, when performing measurements at a closer distance than specified, the results shall be following below methods. Note: If fundamental emission level is smaller than noise at 3m , we will change distance to 1m. The results shall be extrapolated to the specified distance by making measurements at a minimum of two distances on at least one radial to determine the proper extrapolation factor. The results shall be by using the square of an inverse linear distance extrapolation factor (40 dB/decade). For radiated measurement. Loop antenna was rotated about the horizontal and vertical axis and the equipment to be measured and the test antenna shall be oriented to obtain the maximum emitted field strength level. The any unwanted emissions level shall not exceed the fundamental emission level. All amplitude of spurious emissions that are attenuated by more than 20 dB below the permissible value has no need to be reported. SPORTON INTERNATIONAL INC. Page No. : 16 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 3.2.4 Test Setup Transmitter Radiated Emissions Magnetic field tests shall be performed in the frequency range of 9 kHz to 30 MHz using a calibrated loop antenna. The center of the loop shall be 1 m above the ground. Electric field tests shall be performed in the frequency range of 30 MHz to 1000 MHz using a calibrated bi-log antenna. the antenna height shall be varied from 1 m to 4 m. SPORTON INTERNATIONAL INC. Page No. : 17 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 3.2.5 Transmitter Radiated Emissions (Below 30MHz) Transmitter Radiated Emissions (667 kHz) Mode Touch Pen Test Freq.(kHz) 667 Operating Mode 1 Polarization H Note 1: “>20dB” means spurious emission levels that exceed the level of 6 dB below the applicable limit. Note 2: “N/F” means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement worst emissions of receive antenna polarization: H (Horizontal). Note 4: No level of unwanted emissions exceeds the level of the fundamental emission. Note 5: Test fundamental emission at 1m Note 6: Below 30MHz of spurious emissions that are attenuated by more than 20 dB below the permissible value has no need to be reported. SPORTON INTERNATIONAL INC. Page No. : 18 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 Transmitter Radiated Emissions (9kHz~150kHz) Mode Touch Pen Test Freq.(kHz) 667 Operating Mode 1 Polarization H Note 1: “>20dB” means spurious emission levels that exceed the level of 6 dB below the applicable limit. Note 2: “N/F” means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement worst emissions of receive antenna polarization: H (Horizontal). Note 4: No level of unwanted emissions exceeds the level of the fundamental emission. Note 5: Except fundamental emission, other emissions from digital circuitry used to control additional panel functions or display capabilities other than the touch panel radio transmission. While disable touch panel radio transmission, other emissions have the same levels. Therefore other emissions level could be exceed the fundamental emission level. Note 6: Below 30MHz of spurious emissions that are attenuated by more than 20 dB below the permissible value has no need to be reported. SPORTON INTERNATIONAL INC. Page No. : 19 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 Transmitter Radiated Emissions (150kHz~30MHz) Mode Touch Pen Test Freq.(kHz) 667 Operating Mode 1 Polarization H Note 1: “>20dB” means spurious emission levels that exceed the level of 6 dB below the applicable limit. Note 2: “N/F” means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement worst emissions of receive antenna polarization: H (Horizontal). Note 4: No level of unwanted emissions exceeds the level of the fundamental emission. Note 5: Except fundamental emission, other emissions from digital circuitry used to control additional panel functions or display capabilities other than the touch panel radio transmission. While disable touch panel radio transmission, other emissions have the same levels. Therefore other emissions level could be exceed the fundamental emission level. Note 6: Below 30MHz of spurious emissions that are attenuated by more than 20 dB below the permissible value has no need to be reported. SPORTON INTERNATIONAL INC. Page No. : 20 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 3.2.6 Transmitter Radiated Emissions (Above 30MHz) Transmitter Radiated Emissions (Above 30MHz) Mode Touch Pen Test Freq.(kHz) 667 Operating Mode 1 Polarization V Note 1: “>20dB” means spurious emission levels that exceed the level of 6 dB below the applicable limit. Note 2: “N/F” means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical). Note 4: No level of unwanted emissions exceeds the level of the fundamental emission. Note 5: Except fundamental emission, other emissions from digital circuitry used to control additional panel functions or display capabilities other than the touch panel radio transmission. While disable touch panel radio transmission, other emissions have the same levels. Therefore other emissions level could be exceed the fundamental emission level. SPORTON INTERNATIONAL INC. Page No. : 21 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 Transmitter Radiated Emissions (Above 30MHz) Mode Touch Pen Test Freq.(kHz) 667 Operating Mode 1 Polarization H Note 1: “>20dB” means spurious emission levels that exceed the level of 6 dB below the applicable limit. Note 2: “N/F” means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical). Note 4: No level of unwanted emissions exceeds the level of the fundamental emission. Note 5: Except fundamental emission, other emissions from digital circuitry used to control additional panel functions or display capabilities other than the touch panel radio transmission. While disable touch panel radio transmission, other emissions have the same levels. Therefore other emissions level could be exceed the fundamental emission level. SPORTON INTERNATIONAL INC. Page No. : 22 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 3.3 Emission Bandwidth 3.3.1 Emission Bandwidth Limit Emission Bandwidth Limit N/A 3.3.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. 3.3.3 Test Procedures Test Method For the emission bandwidth refer ANSI C63.10, clause 6.9.3 for occupied bandwidth testing. For radiated measurement. Loop antenna was rotated about the horizontal and vertical axis and the equipment to be measured and the test antenna shall be oriented to obtain the maximum emitted field strength level. 3.3.4 Test Setup Emission Bandwidth SPORTON INTERNATIONAL INC. Page No. : 23 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 3.3.5 Test Result of Emission Bandwidth Occupied Channel Bandwidth Result Transmitter Mode Frequency (kHz) 99% Bandwidth (kHz) 20dB Bandwidth (kHz) Touch Pen 667 29.37 33.50 Limit N/A Result Complied Emission Bandwidth Plot - 99% Bandwidth Emission Bandwidth Plot - 20dB Bandwidth SPORTON INTERNATIONAL INC. Page No. : 24 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR6O0419 4 Test Equipment and Calibration Data <AC Power-line Conducted Emissions> Calibration Calibration Instrument Manufacturer Model No. Serial No. Characteristics Date Due Date EMC Receiver R&S ESR-3 102051 9KHz ~ 3.6GHz 19/04/2016 18/04/2017 SCHWARZBECK LISN NSLK 8127 8127-477 9kHz ~ 30MHz 26/01/2016 25/01/2017 MESS-ELEKTRONIK LISN R&S ENV216 101295 9kHz ~ 30MHz 04/11/2015 03/11/2016 (Support Unit) RF Cable-CON HUBER+SUHNER RG213/U 07611832020001 9kHz ~ 30MHz 30/10/2015 29/10/2016 EMI Filter LINDGREN LRE-2030 2651 < 450 Hz NCR NCR NCR : Non-Calibration Require <RF Conducted> Calibration Calibration Instrument Manufacturer Model No. Serial No. Characteristics Date Due Date Spectrum R&S FSV 40 101013 9KHz~40GHz 16/02/2016 15/02/2017 Analyzer <Radiated Emission> Calibration Calibration Instrument Manufacturer Model No. Serial No. Characteristics Date Due Date 3m Semi 30MHz ~ 1GHz Anechoic SIDT FRANKONIA SAC-3M 03CH03-HY 28/11/2015 27/11/2016 3m Chamber 3m Semi 1GHz ~ 18GHz Anechoic SIDT FRANKONIA SAC-3M 03CH03-HY 16/12/2015 15/12/ 2016 3m Chamber 10kHz ~ Amplifier HP 8447D 2944A08033 10/05//2016 09/05/2017 1.3GHz Spectrum R&S FSP 40 100305 9kHz ~ 40GHz 16/02/2016 15/02/2017 Bilog Antenna SCHAFFNER CBL 6112B 2723 30MHz ~ 1GHz 01/10/2016 30/09/2017 Loop Antenna TESEQ HLA 6120 31244 9 kHz~30 MHz 02/02/2015 01/02/2017 SPORTON INTERNATIONAL INC. Page No. : 25 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973


Document Created: 2017-12-24 18:34:14
Document Modified: 2017-12-24 18:34:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC