modular approval request

FCC ID: HPL5243

Cover Letter(s)

Download: PDF
FCCID_1494364

ab Medical Imaging RDE From: Jan Vercammen, He/Im/RDE/TSP-HW/Electronics Ref: Thursday, April 21, 2011 Concerning: Cirrus RFID reader Modular Transmitter and 47 CFR part 15 subpart C (FCC ID: HPL5243) This short note describes the 47 CFR part 15 subpart C test configuration for radio type testing and the modular character of the Cirrus RFID reader. The Cirrus RFID reader (internal reference A800626.X where X is a (software) version number is called reader throughout the rest of this document. The reader is designed and manufactured by Agfa-Healthcare NV. The reader is integrated into medical scanners (manufactured Agfa-Healthcare NV.) by providing a +5V DC power supply and a RS232 serial interface (transmit TX and receive RX). The reader is an intentional radiator that is based on inductive coupling to power a passive tag (using the Mifare protocol). The carrier frequency is 13.56MHz – section15.225. The reader needs to comply with 47 CFR part 15 subpart C – 15.207 and 15.209. The reader complies with all requirements of Modular Transmitters - section 15.212 15.212 (1) (i) the radio element has its own shielding, i.e. the MFR522 TX part is shielded 15.212 (1) (ii) the data inputs/outputs are buffered, i.e. the module uses RS232 data buffers 15.212 (1) (iii) the module has local power supply regulation, i.e. the module uses a local low-dropout regulator 15.212 (1) (iv) the antenna is fixed to the circuit part [sect 15.203 & 15.204 (b)] 15.212 (1) (v) the module is tested stand-alone (see test report CirrusRFIDreader ETC3170.pdf) 15.212 (vi) the module has a FCC ID labeled to the printed circuit board End of Document Confidential Page 1 of 1 21/04/2011 CirrusRFIDreader FCCTestConfiguration+ModularCharacter.doc


Document Created: 2011-04-21 13:25:03
Document Modified: 2011-04-21 13:25:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC