Users Manual_Regulatory Integration Instructions

FCC ID: HPL-DSRFID

Users Manual

Download: PDF

FCCID_4265245

ab
Medical Imaging
From: Jan Vercammen (6233) – R&D Mortsel Electronics
Date: March 21, 2019

Concerning: Regulatory and hardware instructions for integration of
DSRFID reader into host applications (concerns FCC ID: HPL-DSRFID)

This document describes the integration of a modular short-range RFID reader
into host applications. The company internal reference of the RFID reader (or
reader for short) is A800126.

Note that the reader is a drop-in replacement for older FCC certified RFID readers that were
type tested in several applications. The reader will never be sold to external parties. We
updated the original design with requirements for full modular approval. A 2nd change is the
replacement of the original (but obsolete) microcontroller.

The reader is a drop-in replacement for similar RFID readers (modular approval
P5ROEM410V12 and type approved HPL5364A, HPL5366, HPL5366A, HPL5367, HPL5367A,
out-of-production HPL5365 and HPL5365A). The reader will be used in production and as a
spare part.

FCC Regulatory requirements

When integrating the reader (A800126) into an application the user should respect the following
regulatory requirements:

The reader has a permanent affixed label (with the text “FCC ID: HPL-DSRFID”) and, because
the module is not visible from the outside, an external label is required that has the text
“Contains Transmitter Module FCC ID: HPL-DSRFID” or “Contains FCC ID: HPL-DSRFID”.

This text must be integrated into the identification plate of the host application or on a separate
label.

Additional restrictions are that the reader cannot be sold to external parties, that is, it is
restricted to company-internal products. The integration instructions are confidential internal
manufacturing documents.

Note that the reader as standalone unit cannot function (per definition).

Confidential Page 1 of 2 03/05/2019
Manual DSRFID readerRegulatoryIntegrationInstructions.doc

ab
Medical Imaging

Additional regulatory information (for the application device manual):

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.

END of Document

Confidential Page 2 of 2 03/05/2019
Manual DSRFID readerRegulatoryIntegrationInstructions.doc

Document Created: 2019-05-03 17:00:57
Document Modified: 2019-05-03 17:00:57

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC