Technical REport ITRM0033

FCC ID: HN2ABTM3-3

Test Report

Download: PDF
FCCID_447869

Intermec Technologies Corporation Bluetooth (8520-00080) in 6820 with GSM, CDMA, 802.11b, and Bluetooth (BC02) in 700C June 18, 2004 Report No. ITRM0033 Report Prepared By: 1-888-EMI-CERT © 2003 Northwest EMC, Inc

22975 NW Evergreen Parkway Suite 400 Hillsboro, Oregon 97124 Certificate of Test Issue Date: June 18, 2004 Intermec Technologies Corporation Model: Bluetooth (8520-00080) in 6820 with GSM, CDMA, 802.11b, and Bluetooth (BC02) in 700C Emissions Description Pass Fail FCC 15.247(c) Spurious Radiated Emissions:2003 Modifications made to the product See the Modifications section of this report Test Facility • The measurement facility used to collect the data is located at: Northwest EMC, Inc.; 22975 NW Evergreen Parkway, Suite 400; Hillsboro, OR 97124 Phone: (503) 844-4066 Fax: 844-3826 This site has been fully described in a report filed with and accepted by the FCC (Federal Communications Commission) and Industry Canada. Approved By: Greg Kiemel, Director of Engineering This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. Product compliance is the responsibility of the client, therefore the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. This Report may only be duplicated in its entirety. The results of this test pertain only to the sample(s) tested, the specific description is noted in each of the individual sections of the test report supporting this certificate of test. Test Report No. ITRM0033 2/21

Northwest Revision History EMC Revision 05/05/03 Revision Description Date Page Number Number 00 None Test Report No. ITRM0033 3/21

Northwest Accreditations and Authorizations EMC Revision 04/01/04 FCC: Accredited by NVLAP for performance of FCC radio, digital, and ISM device testing. Our Open Area Test Sites, certification chambers, and conducted measurement facilities, have been fully described in reports filed with the FCC and accepted by the FCC in letters maintained in our files. Northwest EMC has been accredited by ANSI to ISO / IEC Guide 65 as a product certifier. We have been designated by the FCC as a Telecommunications Certification Body (TCB). This allows Northwest EMC to certify transmitters to FCC specifications in accordance with 47 CFR 2.960 and 2.962. NVLAP: Northwest EMC, Inc. is recognized under the United States Department of Commerce, National Institute of Standards and Technology, National Voluntary Laboratory Accreditation Program for satisfactory compliance with the requirements of ISO/IEC 17025 for Testing Laboratories. The NVLAP accreditation encompasses Electromagnetic Compatibility Testing in accordance with the European Union EMC Directive 89/336/EEC, ANSI C63.4, MIL-STD 461E, DO-160D and SAE J1113. Additionally, Northwest EMC is accredited by NVLAP to perform radio testing in accordance with the European Union R&TTE Directive 1999/5/EEC, the requirements of FCC, and the RSS radio standards for Industry Canada. Accreditation has been granted to Northwest EMC, Inc. under Certificate Numbers: 200629-0, 200630-0, and 200676-0. Industry Canada: Accredited by NVLAP for performance of Industry Canada RSS and ICES testing. Our Open Area Test Sites and certification chambers comply with RSS 212, Issue 1 (Provisional) and have been filed with Industry Canada and accepted. Northwest EMC has been accredited by ANSI to ISO / IEC Guide 65 as a product certifier. We have been designated by NIST and recognized by Industry Canada as a Certification Body (CB) per the APEC Mutual Recognition Arrangement (MRA). This allows Northwest EMC to certify transmitters to Industry Canada technical requirements. CAB: Designated by NIST and validated by the European Commission as a Conformity Assessment Body (CAB) to conduct tests and approve products to the EMC directive and transmitters to the R&TTE directive, as described in the U.S. - EU Mutual Recognition Agreement TÜV Product Service: Included in TUV Product Service Group's Listing of Recognized Laboratories. It qualifies in connection with the TUV Certification after Recognition of Agent's Testing Program for the product categories and/or standards shown in TUV's current Listing of CARAT Laboratories available from TUV. A certificate was issued to represent that this laboratory continues to meet TUV's CARAT Program requirements. Certificate No. USA0401C Test Report No. ITRM0033 4/21

Northwest Accreditations and Authorizations EMC Revision 04/01/04 TÜV Rheinland: Authorized to carryout EMC tests by order and under supervision of TÜV Rheinland. This authorization is based on "Conditions for EMC- Subcontractors" of November 1992. NEMKO: Assessed and accredited by NEMKO (Norwegian testing and certification body) for European emissions and immunity testing. As a result of NEMKO's laboratory assessment, they will accept test results from Northwest EMC, Inc. for product certification (Authorization No. ELA 119). Technology International: Assessed in accordance with ISO Guide 25 defining the general international requirements for the competence of calibration and testing laboratories and with ITI assessment criteria LACO196. Based upon that assessment Interference Technology International, Ltd., has granted approval for specifications implementing the EU Directive on EMC (89/336/EEC and amendments). The scope of the approval was provided on a Schedule of Assessment supplied with the certificate and is available upon request. Australia/New Zealand: The National Association of Testing Authorities (NATA), Australia has been appointed by the ACA as an accreditation body to accredit test laboratories and competent bodies for EMC standards. Accredited test reports or assessments by competent bodies must carry the NATA logo. Test reports made by an overseas laboratory that has been accredited for the relevant standards by an overseas accreditation body that has a Mutual Recognition Agreement (MRA) with NATA are also accepted as technical grounds for product conformity. The report should be endorsed with the respective logo of the accreditation body. (NVLAP) VCCI: Accepted as an Associate Member to the VCCI, Acceptance No. 564. Conducted and radiated measurement facilities have been registered in accordance with Regulations for Voluntary Control Measures, Article 8. (Registration Nos. - Evergreen: C-1071 and R-1025, Trails End: C-1877 and R-1760, Sultan: C-905, R-871, C-1784 and R-1761) BSMI: Northwest EMC has been designated by NIST and validated by C-Taipei (BSMI) as a CAB to conduct tests as described in the APEC Mutual Recognition Agreement. License No.SL2-IN-E-1017. GOST: Northwest EMC, Inc. has been assessed and accredited by the Russian Certification bodies Certinform VNIINMASH, CERTINFO, SAMTES, and Federal CHEC, to perform EMC and Hygienic testing for Information Technology Products. As a result of their laboratory assessment, they will accept test results from Northwest EMC, Inc. for product certification SCOPE For details on the Scopes of our Accreditations, please visit: http://www.nwemc.com/scope.asp Test Report No. ITRM0033 5/21

Northwest Measurement Uncertainty EMC Revision 04/29/02 What is measurement uncertainty? When a measurement is made, the result will be different from the true or theoretically correct value. The difference is the result of tolerances in the measurement system that cannot be completely eliminated. To the extent that technology allows us, it has been our aim to minimize this error. The following statement of measurement uncertainty is used to reflect the accuracy of the measured result as compared with its “true” value. In the case of transient tests (ESD, EFT, Surge, Voltage Dips and Interruptions), the test equipment has been demonstrated by calibration to provide at least a 95% confidence that it complies with the test specification requirements. The following documents were the basis for determining the uncertainty levels of our measurements: • “ISO Guide to the Expression of Uncertainty in Measurements”, October 1993 • “NIS81: The Treatment of Uncertainty in EMC Measurements”, May 1994 • “IEC CISPR 16-3 A1 f1 Ed.1: Radio-interference measurements and statistical techniques”, December 2000 How might measurement uncertainty be applied to test results? If the diamond marks the measured value for the test and the vertical bars bracket the range of + and – measurement uncertainty, then test results can be interpreted from the diagram below. 80.0 60.0 Case D dBuV/m Case C 40.0 Case B Case A 20.0 0.0 10.000 100.000 1000.000 MHz Test Result Scenarios: Case A: Product complies. Case B: Product conditionally complies. It is not possible to say with 95% confidence that the product complies. Case C: Product conditionally does not comply. It is not possible to say with 95% confidence that the product does not comply. Case D: Product does not comply. Test Report No. ITRM0033 6/21

Northwest Measurement Uncertainty EMC Revision 04/29/02 Radiated Emissions ≤ 1 GHz Value (dB) Probability Biconical Log Periodic Dipole Distribution Antenna Antenna Antenna Test Distance 3m 10m 3m 10m 3m 10m Combined standard normal + 1.86 + 1.82 + 2.23 + 1.29 + 1.31 + 1.25 uncertainty uc(y) - 1.88 - 1.87 - 1.41 - 1.26 - 1.27 - 1.25 Expanded uncertainty U normal (k=2) + 3.72 + 3.64 + 4.46 + 2.59 + 2.61 + 2.49 (level of confidence ≈ 95%) - 3.77 - 3.73 -2.81 - 2.52 - 2.55 - 2.49 Radiated Emissions > 1 GHz Value (dB) Probability Without High With High Distribution Pass Filter Pass Filter Combined standard uncertainty uc(y) normal + 1.29 + 1.38 - 1.25 - 1.35 Expanded uncertainty U normal (k=2) + 2.57 + 2.76 (level of confidence ≈ 95%) - 2.51 - -2.70 Conducted Emissions Probability Value Distribution (+/- dB) Combined standard uncertainty uc(y) normal 1.48 Expanded uncertainty U normal (k = 2) 2.97 (level of confidence ≈ 95 %) Radiated Immunity Probability Value Distribution (+/- dB) Combined standard uncertainty uc(y) normal 1.05 Expanded uncertainty U normal (k = 2) 2.11 (level of confidence ≈ 95 %) Conducted Immunity Probability Value Distribution (+/- dB) Combined standard uncertainty uc(y) normal 1.05 Expanded uncertainty U normal (k = 2) 2.10 (level of confidence ≈ 95 %) Legend uc(y) = square root of the sum of squares of the individual standard uncertainties U = combined standard uncertainty multiplied by the coverage factor: k. This defines an interval about the measured result that will encompass the true value with a confidence level of approximately 95%. If a higher level of confidence is required, then k=3 (CL of 99.7%) can be used. Please note that with a coverage factor of one, uc(y) yields a confidence level of only 68%. Test Report No. ITRM0033 7/21

Northwest Facilities EMC California Orange County Facility 41 Tesla Ave. Irvine, CA 92618 (888) 364-2378 FAX (503) 844-3826 Oregon Evergreen Facility 22975 NW Evergreen Pkwy., Suite 400 Hillsboro, OR 97124 (503) 844-4066 FAX (503) 844-3826 Oregon Trails End Facility 30475 NE Trails End Lane Newberg, OR 97132 (503) 844-4066 FAX (503) 537-0735 Washington Sultan Facility 14128 339th Ave. SE Sultan, WA 98294 (888) 364-2378 FAX (360) 793-2536 Test Report No. ITRM0033 8/21

Northwest Product Description EMC Revision 10/3/03 Party Requesting the Test Company Name: Intermec Technologies Corporation Address: 550 Second St. SE City, State, Zip: Cedar Rapids, IA 52401-2023 Test Requested By: Scott Holub Bluetooth in 6820 printer with CDMA, GSM, 802.11b, and a different Equipment Under Test: Bluetooth module in 700C Model: 8520-00080 First Date of Test: 06-16-2004 Last Date of Test: 06-18-2004 Receipt Date of Samples: 05-13-2004 Equipment Design Stage: Production Equipment Condition: No visual damage. Information Provided by the Party Requesting the Test Clocks/Oscillators: Not provided at the time of test. I/O Ports: Serial on printer. Functional Description of the EUT (Equipment Under Test): Bluetooth radio installed in a 6820 Printer. Printer includes a docking station for 700C. Client Justification for EUT Selection: The EUT is a representative production sample. Client Justification for Test Selection: These tests satisfy the requirements FCC 15.247 (c) for co-located transmitters. EUT Photo Test Report No. ITRM0033 9/21

Northwest Spurious Radiated Emissions EMC Revision 10/1/03 Justification The EUT is a Bluetooth radio module installed inside Intermec’s mobile printer, Model 6820. The 6820 includes a docking station for Intermec’s handheld computers, Models 700C. With the hand-held scanners, the EUT contains co-located radio modules (CDMA , GSM, 802.11(b), and Bluetooth). This test demonstrates compliance with FCC 15.247(c) emissions limits while the EUT is co-located with the previously certified Bluetooth radio in the 700C hand-held computers (FCC ID: HN2ABTM3-3). Each radio transmits through its own antenna. Combinations of harmonic emissions from the CDMA, 802.11(b), GSM, and Bluetooth radios were compared numerically. It was determined that there were no possible coincidental harmonics below 1 GHz. All the radios were configured for simultaneous transmission at the channels specified below: Channels in Specified Band Investigated: 802.11(b): 11 CDMA (Cellular): 55 CDMA (PCS): 4 Bluetooth: 80 GSM: 512 Operating Modes Investigated: Bluetooth Radio in 6820 with 700C in docking station: Simultaneous transmission of Bluetooth Channel 80, 802.11(b) Channel 11, & CDMA PCS Channel 4 Simultaneous transmission of Bluetooth Channel 80, 802.11(b) Channel 11, & CDMA cellular Channel 55 Simultaneous transmission of Bluetooth Channel 80, 802.11(b) Channel 11, & GSM Channel 512 Data Rates Investigated: Maximum Antennas Investigated: 802.11(b): 2011B integral antenna (internal to 700C) CDMA (Cellular): 805-606-102 Dual Band CDMA 900/1900MHz Antenna (SB555) (external to 700C) CDMA (PCS): 805-666-204 Single Band CDMA 1900MHz Antenna (SB555) (external to 700C) Bluetooth: Integral PCB trace (internal to 6820, 700C) GSM: SMC45 Output Power Setting(s) Investigated: Maximum Power Input Settings Investigated: 120 VAC, 60 Hz. Frequency Range Investigated Start Frequency 1 GHz Stop Frequency 26 GHz Test Report No. ITRM0033 10/21

Northwest Spurious Radiated Emissions EMC Revision 10/1/03 Software\Firmware Applied During Test Blue Test FCC_Smart Exercise software Version Unknown 802.11 Agency Test PhoneUtility Description The system was tested using special test software to exercise the functions of the device during the testing such as channels, power, and modulation during simultaneous transmission. EUT and Peripherals Model/Part Serial Description Manufacturer Number Number Bluetooth Radio in Printer Intermec Technologies Corporation 8520-0080 Unknown Printer Intermec Technologies Corporation 6820 N/A AC Adapter Intermec Technologies Corporation 851-064-001 0001771 Handheld Computer with Intermec Technologies Corporation 700C 05400400873 CDMA option Handheld Computer with Intermec Technologies Corporation 700C 05400400641 GSM option Bluetooth Radio in 700C Intermec Technologies Corporation BC02 N/A 802.11(b) Radio Intermec Technologies Corporation 2011B N/A CDMA Radio Intermec Technologies Corporation SB555 N/A GSM Radio Intermec Technologies Corporation SMC45 N/A Remote Equipment Outside of Test Setup Boundary Description Manufacturer Model/Part Number Serial Number Remote laptop Dell TS30G 7247346BYK0204A Equipment isolated from the EUT so as not to contribute to the measurement result is considered to be outside the test setup boundary Cables Cable Type Shield Length (m) Ferrite Connection 1 Connection 2 AC Power No 2.0 No AC Adapter AC Mains DC Leads PA 1.8 PA Printer AC Adapter Serial Yes 4.0 No Printer Remote laptop PA = Cable is permanently attached to the device. Shielding and/or presence of ferrite may be unknown. Test Report No. ITRM0033 11/21

Northwest Spurious Radiated Emissions EMC Revision 10/1/03 Measurement Equipment Description Manufacturer Model Identifier Last Cal Interval Antenna, Horn EMCO 3160-09 AHG NCR NA JSD4-18002600-26- Pre-Amplifier Miteq APU 10/08/2003 12 mo 8P AMF-4D-005180-24- Pre-Amplifier Miteq APC 10/08/2003 12 mo 10P Antenna, Horn EMCO 3160-08 AHK NCR NA Antenna, Horn EMCO 3115 AHC 09/18/2003 12 mo AMF-4D-005180-24- Pre-Amplifier Miteq APJ 01/05/2004 13 mo 10P Amplifier Pre-Amplifier LN1000A APS 02/05/2004 13 mo Research Antenna, Biconilog EMCO 3141 AXE 12/03/2003 24 mo Spectrum Analyzer Hewlett-Packard 8566B AAL 12/23/2003 13 mo Spectrum Analyzer Hewlett Packard 85662A AALD 12/23/2003 13 mo Display Quasi-Peak Adapter Hewlett-Packard 85650A AQF 12/23/2003 13 mo Spectrum Analyzer Tektronix 2784 AAO 02/26/2003 24 mo High Pass Filter Micro-Tronics HPM50111 HFO 04/13/2004 13 mo GSM/DCS/PCS MS Hewlett-Packard 8922M N/A NCR NA Test Set GSM/DCS/PCS RF Hewlett-Packard 83220E N/A NCR NA Interface Test Description Requirement: Per 15.247(c), the field strength of any spurious emissions or modulation products that fall in a restricted band, as defined in 15.205, is measured. The peak level must comply with the limits specified in 15.35(b). The average level (taken with a 10Hz VBW) must comply with the limits specified in 15.209. Configuration for Simultaneous Transmission: The EUT is an Bluetooth radio module installed inside Intermec’s mobile printer, Model 6820. The printer can have co-located radio modules when an Intermec Handheld Computer, 700C, is installed in the docking station. The 700C has Bluetooth radio module that has been previously certified (FCC ID: HN2ABTM3-3 ). With a handheld computer installed in the printer, the Bluetooth radio module can simultaneously transmit with four other co-located radios (CDMA, GSM, Bluetooth, and 802.11(b)). This test demonstrates compliance with FCC 15.247(c) emissions limits while the EUT is co-located with the previously certified Bluetooth radio module. The EUT can transmit simultaneously with CDMA, 802.11(b), and Bluetooth or with GSM, 802.11(b), and Bluetooth in the 700C. Each radio transmits through its own antenna. Test Report No. ITRM0033 12/21

Northwest Spurious Radiated Emissions EMC Revision 10/1/03 The following is an excerpt from the FCC / TCB Training Q & A, October 2002, Day 2, Question 7: Assuming that the radios do not share an antenna, only radiated tests for simultaneous transmission is required. If the radios share an antenna, antenna conducted measurements would also be required. Only one set of worst case simultaneous transmission data is going to be requested to be submitted at this time. The test engineer should indicate the worst case condition and provide justification as to why the worst case condition was chosen. The grantee should be reminded that even if the FCC requests one set of data, they are responsible for compliance for all modes of simultaneous transmission. All possible combinations of harmonic emissions from the CDMA, 802.11(b), GSM, and Bluetooth radios were compared numerically. It was determined that there were no possible coincidental harmonics below 1 GHz. The frequency range from 1 GHz to 26 GHz was investigated for channel combinations that would produce coincidental harmonics. Compliance with the restricted band at 2483.5 – 2500 MHz was also measured. All the radios were configured for simultaneous transmission at the channels specified in the previous pages. The highest gain antennas to be used with the radios were tested. The spectrum was scanned throughout the specified range. While scanning, emissions from the radios were maximized by rotating the EUT on a turntable, adjusting the position of the EUT and EUT antennas in three orthogonal axes, and adjusting the measurement antenna height and polarization (per ANSI C63.4:1992). A preamp and high pass filter were used for this test in order to provide sufficient measurement sensitivity. Bandwidths Used for Measurements Frequency Range Peak Data Quasi-Peak Data Average Data (MHz) (kHz) (kHz) (kHz) 0.01 – 0.15 1.0 0.2 0.2 0.15 – 30.0 10.0 9.0 9.0 30.0 – 1000 100.0 120.0 120.0 Above 1000 1000.0 N/A 1000.0 Measurements were made using the bandwidths and detectors specified. No video filter was used. Completed by: Test Report No. ITRM0033 13/21

NORTHWEST REV EMC RADIATED EMISSIONS DATA SHEET df4.13 05/06/2004 EUT: 8520-00080 Work Order: ITRM0033 Serial Number: Date: 06/16/04 Customer: Intermec Technologies Corporation Temperature: 75 Attendees: none Humidity: 35% Cust. Ref. No.: Barometric Pressure 30.3 Holly Ashkannejhad Tested by: Power: 120VAC, 60Hz Job Site: EV01 TEST SPECIFICATIONS Specification: FCC 15.247(c) Spurious Radiated Emissions Year: 2003 Method: ANSI C63.4 Year: 2001 SAMPLE CALCULATIONS Radiated Emissions: Field Strength = Measured Level + Antenna Factor + Cable Factor - Amplifier Gain + Distance Adjustment Factor + External Attenuation Conducted Emissions: Adjusted Level = Measured Level + Transducer Factor + Cable Attenuation Factor + External Attenuator COMMENTS FCC: HN2ABTM3-3 installed in 700C. EUT installed in 6820 Printer. EUT OPERATING MODES Bluetooth 80 in 6820 Printer. Bluetooth 80, 802.11b 11, GSM 512 in 700C. DEVIATIONS FROM TEST STANDARD No deviations. RESULTS Run # Pass 3 Other Tested By: 80.0 70.0 60.0 50.0 dBuV/m 40.0 30.0 20.0 10.0 0.0 3000.000 4000.000 5000.000 6000.000 7000.000 8000.000 9000.000 10000.000 MHz External Distance Compared to Freq Amplitude Factor Azimuth Height Distance Attenuation Polarity Detector Adjustment Adjusted Spec. Limit Spec. (MHz) (dBuV) (dB) (degrees) (meters) (meters) (dB) (dB) dBuV/m dBuV/m (dB) 3860.724 40.0 1.8 159.0 1.3 3.0 0.0 V-Horn AV 0.0 41.8 54.0 -12.2 3860.724 39.9 1.8 208.0 1.3 3.0 0.0 H-Horn AV 0.0 41.7 54.0 -12.3 7401.000 28.3 11.0 209.0 1.3 3.0 0.0 V-Horn AV 0.0 39.3 54.0 -14.7 7401.000 27.1 11.0 228.0 1.3 3.0 0.0 H-Horn AV 0.0 38.1 54.0 -15.9 7401.000 45.4 11.0 209.0 1.3 3.0 0.0 V-Horn PK 0.0 56.4 74.0 -17.6 3934.944 30.4 2.2 149.0 1.2 3.0 0.0 V-Horn AV 0.0 32.6 54.0 -21.4 7401.000 41.5 11.0 228.0 1.3 3.0 0.0 H-Horn PK 0.0 52.5 74.0 -21.5 3934.944 28.8 2.2 17.0 1.3 3.0 0.0 H-Horn AV 0.0 31.0 54.0 -23.0 3860.724 48.1 1.8 159.0 1.3 3.0 0.0 V-Horn PK 0.0 49.9 74.0 -24.1 3860.724 47.8 1.8 208.0 1.3 3.0 0.0 H-Horn PK 0.0 49.6 74.0 -24.4 3934.944 46.4 2.2 149.0 1.2 3.0 0.0 V-Horn PK 0.0 48.6 74.0 -25.4 3934.944 43.0 2.2 17.0 1.3 3.0 0.0 H-Horn PK 0.0 45.2 74.0 -28.8 Test Report No. ITRM0033 14/21

NORTHWEST REV EMC RADIATED EMISSIONS DATA SHEET df4.13 05/06/2004 EUT: 8520-00080 Work Order: ITRM0033 Serial Number: Date: 06/16/04 Customer: Intermec Technologies Corporation Temperature: 75 Attendees: none Humidity: 35% Cust. Ref. No.: Barometric Pressure 30.3 Holly Ashkannejhad Tested by: Power: 120VAC, 60Hz Job Site: EV01 TEST SPECIFICATIONS Specification: FCC 15.247(c) Spurious Radiated Emissions Year: 2003 Method: ANSI C63.4 Year: 2001 SAMPLE CALCULATIONS Radiated Emissions: Field Strength = Measured Level + Antenna Factor + Cable Factor - Amplifier Gain + Distance Adjustment Factor + External Attenuation Conducted Emissions: Adjusted Level = Measured Level + Transducer Factor + Cable Attenuation Factor + External Attenuator COMMENTS FCC: HN2ABTM3-3 installed in 700C. EUT installed in 6820 Printer. EUT OPERATING MODES Bluetooth 80 in 6820 Printer. Bluetooth 80, 802.11b 11, CDMA 4 (PCS) in 700C. DEVIATIONS FROM TEST STANDARD No deviations. RESULTS Run # Pass 4 Other Tested By: 80.0 70.0 60.0 50.0 dBuV/m 40.0 30.0 20.0 10.0 0.0 4000.000 5000.000 6000.000 7000.000 8000.000 9000.000 10000.000 MHz External Distance Compared to Freq Amplitude Factor Azimuth Height Distance Attenuation Polarity Detector Adjustment Adjusted Spec. Limit Spec. (MHz) (dBuV) (dB) (degrees) (meters) (meters) (dB) (dB) dBuV/m dBuV/m (dB) 7401.000 27.9 11.0 214.0 1.4 3.0 0.0 H-Horn AV 0.0 38.9 54.0 -15.1 7401.000 26.8 11.0 133.0 1.2 3.0 0.0 V-Horn AV 0.0 37.8 54.0 -16.2 4330.097 31.5 2.5 119.0 1.7 3.0 0.0 H-Horn AV 0.0 34.0 54.0 -20.0 4330.097 29.8 2.5 168.0 1.7 3.0 0.0 V-Horn AV 0.0 32.3 54.0 -21.7 7401.000 40.7 11.0 214.0 1.4 3.0 0.0 H-Horn PK 0.0 51.7 74.0 -22.3 7401.000 40.3 11.0 133.0 1.2 3.0 0.0 V-Horn PK 0.0 51.3 74.0 -22.7 4330.097 46.6 2.5 119.0 1.7 3.0 0.0 H-Horn PK 0.0 49.1 74.0 -24.9 4330.097 43.7 2.5 168.0 1.7 3.0 0.0 V-Horn PK 0.0 46.2 74.0 -27.8 Test Report No. ITRM0033 15/21

NORTHWEST REV EMC RADIATED EMISSIONS DATA SHEET df4.13 05/06/2004 EUT: 8520-00080 Work Order: ITRM0033 Serial Number: Date: 06/16/04 Customer: Intermec Technologies Corporation Temperature: 75 Attendees: none Humidity: 35% Cust. Ref. No.: Barometric Pressure 30.3 Holly Ashkannejhad Tested by: Power: 120VAC, 60Hz Job Site: EV01 TEST SPECIFICATIONS Specification: FCC 15.247(c) Spurious Radiated Emissions Year: 2003 Method: ANSI C63.4 Year: 2001 SAMPLE CALCULATIONS Radiated Emissions: Field Strength = Measured Level + Antenna Factor + Cable Factor - Amplifier Gain + Distance Adjustment Factor + External Attenuation Conducted Emissions: Adjusted Level = Measured Level + Transducer Factor + Cable Attenuation Factor + External Attenuator COMMENTS FCC: HN2ABTM3-3 installed in 700C. EUT installed in 6820 Printer. EUT OPERATING MODES Bluetooth 80 in 6820 Printer. Bluetooth 80, 802.11b 11, CDMA 55 (cellular) in 700C DEVIATIONS FROM TEST STANDARD No deviations. RESULTS Run # Pass 5 Other Tested By: 80.0 70.0 60.0 50.0 dBuV/m 40.0 30.0 20.0 10.0 0.0 4000.000 5000.000 6000.000 7000.000 8000.000 9000.000 10000.000 MHz External Distance Compared to Freq Amplitude Factor Azimuth Height Distance Attenuation Polarity Detector Adjustment Adjusted Spec. Limit Spec. (MHz) (dBuV) (dB) (degrees) (meters) (meters) (dB) (dB) dBuV/m dBuV/m (dB) 4960.000 57.3 3.8 201.0 1.2 3.0 0.0 V-Horn PK 0.0 61.1 74.0 -12.9 4960.000 57.2 3.8 148.0 1.9 3.0 0.0 H-Horn PK 0.0 61.0 74.0 -13.0 4960.000 37.1 3.8 148.0 1.9 3.0 0.0 H-Horn AV 0.0 40.9 54.0 -13.1 4960.000 36.4 3.8 201.0 1.2 3.0 0.0 V-Horn AV 0.0 40.2 54.0 -13.8 7440.000 26.3 11.0 349.0 1.2 3.0 0.0 V-Horn AV 0.0 37.3 54.0 -16.7 7440.000 26.3 11.0 214.0 3.0 3.0 0.0 H-Horn AV 0.0 37.3 54.0 -16.7 7440.000 39.6 11.0 349.0 1.2 3.0 0.0 V-Horn PK 0.0 50.6 74.0 -23.4 7440.000 39.6 11.0 214.0 3.0 3.0 0.0 H-Horn PK 0.0 50.6 74.0 -23.4 Test Report No. ITRM0033 16/21

NORTHWEST REV EMC RADIATED EMISSIONS DATA SHEET df4.13 05/06/2004 EUT: 8520-00080 Work Order: ITRM0033 Serial Number: Date: 06/16/04 Customer: Intermec Technologies Corporation Temperature: 75 Attendees: none Humidity: 35% Cust. Ref. No.: Barometric Pressure 30.3 Holly Ashkannejhad Tested by: Power: 120VAC, 60Hz Job Site: EV01 TEST SPECIFICATIONS Specification: FCC 15.247(c) Spurious Radiated Emissions Year: 2003 Method: ANSI C63.4 Year: 2001 SAMPLE CALCULATIONS Radiated Emissions: Field Strength = Measured Level + Antenna Factor + Cable Factor - Amplifier Gain + Distance Adjustment Factor + External Attenuation Conducted Emissions: Adjusted Level = Measured Level + Transducer Factor + Cable Attenuation Factor + External Attenuator COMMENTS FCC: HN2ABTM3-3 installed in 700C. EUT installed in 6820 Printer. EUT OPERATING MODES Bluetooth 80 in 6820 Printer. Bluetooth 80, 802.11b 11, GSM 512 in 700C DEVIATIONS FROM TEST STANDARD No deviations. RESULTS Run # Pass 6 Other Tested By: 80.0 70.0 60.0 50.0 dBuV/m 40.0 30.0 20.0 10.0 0.0 12500.000 13500.000 14500.000 15500.000 16500.000 17500.000 MHz External Distance Compared to Freq Amplitude Factor Azimuth Height Distance Attenuation Polarity Detector Adjustment Adjusted Spec. Limit Spec. (MHz) (dBuV) (dB) (degrees) (meters) (meters) (dB) (dB) dBuV/m dBuV/m (dB) 15445.150 27.3 14.0 169.0 1.2 3.0 0.0 V-Horn AV 0.0 41.3 54.0 -12.7 15445.150 27.3 14.0 266.0 1.6 3.0 0.0 H-Horn AV 0.0 41.3 54.0 -12.7 15445.150 40.5 14.0 169.0 1.2 3.0 0.0 V-Horn PK 0.0 54.5 74.0 -19.5 15445.150 40.5 14.0 266.0 1.6 3.0 0.0 H-Horn PK 0.0 54.5 74.0 -19.5 Test Report No. ITRM0033 17/21

NORTHWEST REV EMC RADIATED EMISSIONS DATA SHEET df4.13 05/06/2004 EUT: 8520-00080 Work Order: ITRM0033 Serial Number: Date: 06/18/04 Customer: Intermec Technologies Corporation Temperature: 75 Attendees: none Humidity: 35% Cust. Ref. No.: Barometric Pressure 30.3 Holly Ashkannejhad Tested by: Power: 120VAC, 60Hz Job Site: EV01 TEST SPECIFICATIONS Specification: FCC Part 15.247(c) Year: 2003 Method: ANSI C63.4 Year: 1992 SAMPLE CALCULATIONS Radiated Emissions: Field Strength = Measured Level + Antenna Factor + Cable Factor - Amplifier Gain + Distance Adjustment Factor + External Attenuation Conducted Emissions: Adjusted Level = Measured Level + Transducer Factor + Cable Attenuation Factor + External Attenuator COMMENTS FCC: HN2ABTM3-3 installed in 700C. EUT installed in 6820 Printer. EUT OPERATING MODES Bluetooth 80 in 6820 Printer. Bluetooth 80, 802.11b 11, GSM 512 in 700C DEVIATIONS FROM TEST STANDARD No deviations. RESULTS Run # Pass 7 Other Tested By: 80.0 70.0 60.0 50.0 dBuV/m 40.0 30.0 20.0 10.0 0.0 1000.000 10000.000 MHz External Distance Compared to Freq Amplitude Factor Azimuth Height Distance Attenuation Polarity Detector Adjustment Adjusted Spec. Limit Spec. (MHz) (dBuV) (dB) (degrees) (meters) (meters) (dB) (dB) dBuV/m dBuV/m (dB) 2483.500 12.7 29.4 35.0 1.0 1.0 0.0 V-Horn AV -9.5 32.6 54.0 -21.4 2483.500 12.4 29.4 321.0 1.0 1.0 0.0 H-Horn AV -9.5 32.3 54.0 -21.7 2483.500 26.0 29.4 35.0 1.0 1.0 0.0 V-Horn PK -9.5 45.9 74.0 -28.1 2483.500 26.0 29.4 321.0 1.0 1.0 0.0 H-Horn PK -9.5 45.9 74.0 -28.1 Test Report No. ITRM0033 18/21

NORTHWEST REV EMC RADIATED EMISSIONS DATA SHEET df4.13 05/06/2004 EUT: 8520-00080 Work Order: ITRM0033 Serial Number: Date: 06/18/04 Customer: Intermec Technologies Corporation Temperature: 75 Attendees: none Humidity: 35% Cust. Ref. No.: Barometric Pressure 30.3 Tested by:Holly Ashkannejhad Power: 120VAC, 60Hz Job Site: EV01 TEST SPECIFICATIONS Specification: FCC Part 15.247(c) Year: 2003 Method: ANSI C63.4 Year: 1992 SAMPLE CALCULATIONS Radiated Emissions: Field Strength = Measured Level + Antenna Factor + Cable Factor - Amplifier Gain + Distance Adjustment Factor + External Attenuation Conducted Emissions: Adjusted Level = Measured Level + Transducer Factor + Cable Attenuation Factor + External Attenuator COMMENTS FCC: HN2ABTM3-3 installed in 700C. EUT installed in 6820 Printer. EUT OPERATING MODES Bluetooth 80 in 6820 Printer. Bluetooth 80, 802.11b 11, CDMA 4 (PCS) in 700C DEVIATIONS FROM TEST STANDARD No deviations. RESULTS Run # Pass 8 Other Tested By: 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 0.0 0.000 5000.000 10000.000 15000.000 20000.000 25000.000 30000.000 35000.000 40000.000 45000.000 External Distance Compared to Freq Amplitude Factor Azimuth Height Distance Attenuation Polarity Detector Adjustment Adjusted Spec. Limit Spec. (MHz) (dBuV) (dB) (degrees) (meters) (meters) (dB) (dB) dBuV/m dBuV/m (dB) 2483.500 13.2 29.4 305.0 1.0 1.0 0.0 V-Horn AV -9.5 33.1 54.0 -20.9 2483.500 12.9 29.4 332.0 1.0 1.0 0.0 H-Horn AV -9.5 32.8 54.0 -21.2 2483.500 29.2 29.4 305.0 1.0 1.0 0.0 V-Horn PK -9.5 49.1 74.0 -24.9 2483.500 25.8 29.4 332.0 1.0 1.0 0.0 H-Horn PK -9.5 45.7 74.0 -28.3 Test Report No. ITRM0033 19/21

NORTHWEST REV EMC RADIATED EMISSIONS DATA SHEET df4.13 05/06/2004 EUT: 8520-00080 Work Order: ITRM0033 Serial Number: Date: 06/18/04 Customer: Intermec Technologies Corporation Temperature: 75 Attendees: none Humidity: 35% Cust. Ref. No.: Barometric Pressure 30.3 Holly Ashkannejhad Tested by: Power: 120VAC, 60Hz Job Site: EV01 TEST SPECIFICATIONS Specification: FCC Part 15.247(c) Year: 2003 Method: ANSI C63.4 Year: 1992 SAMPLE CALCULATIONS Radiated Emissions: Field Strength = Measured Level + Antenna Factor + Cable Factor - Amplifier Gain + Distance Adjustment Factor + External Attenuation Conducted Emissions: Adjusted Level = Measured Level + Transducer Factor + Cable Attenuation Factor + External Attenuator COMMENTS FCC: HN2ABTM3-3 installed in 700C. EUT installed in 6820 Printer. EUT OPERATING MODES Bluetooth 80 in 6820 Printer. Bluetooth 80, 802.11b 11, CDMA 55 (cell) in 700C DEVIATIONS FROM TEST STANDARD No deviations. RESULTS Run # Pass 9 Other Tested By: 80.0 70.0 60.0 50.0 dBuV/m 40.0 30.0 20.0 10.0 0.0 1000.000 10000.000 MHz External Distance Compared to Freq Amplitude Factor Azimuth Height Distance Attenuation Polarity Detector Adjustment Adjusted Spec. Limit Spec. (MHz) (dBuV) (dB) (degrees) (meters) (meters) (dB) (dB) dBuV/m dBuV/m (dB) 2483.500 16.7 29.4 306.0 1.0 1.0 0.0 H-Horn AV -9.5 36.6 54.0 -17.4 2483.500 15.0 29.4 308.0 1.0 1.0 0.0 V-Horn AV -9.5 34.9 54.0 -19.1 2483.500 31.6 29.4 306.0 1.0 1.0 0.0 H-Horn PK -9.5 51.5 74.0 -22.5 2483.500 30.6 29.4 308.0 1.0 1.0 0.0 V-Horn PK -9.5 50.5 74.0 -23.5 Test Report No. ITRM0033 20/21



Document Created: 2004-07-01 12:46:14
Document Modified: 2004-07-01 12:46:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC