Attestation Letter from Applicant

FCC ID: HN2ABTM3-3

RF Exposure Info

Download: PDF
FCCID_337756

Intermec Technologies Corporation 6001 36th Avenue West Everett, WA 98203-9280 425.356.1765 tel 425.348.2633 fax www.intermec.com May 27, 2003 To Whom It May Concern: This letter is to confirm that Intermec Technologies Corp. Model 700C uses the same 2.4 GHz FHSS Bluetooth transceiver in our applications HN2ABTM3, HN2ABTM3-2 and HN2ABTM3-3. The Socket Communications manufactured transceiver module has in the configuration used by our host device approximately (slightly less than) 10 mW conducted output power. It uses an on- board integrated antenna with an –9 dBm gain, bringing the total EIRP to 1 mW. In the original HN2ABTM3 application the conducted power was used to declare the power level, while the true EIRP was still 1 mW. In our current application (HN2ABTM3-3) we declared the true EIRP of 1 mW. This is the reason for the discrepancy between the original application and the current one. Since it is a very low power transceiver, it should not need SAR testing for RF exposure evaluation, but we included an older report just in case. If you have any questions regarding these products, please feel free to contact our local representative or our Safety and Compliance Group in Everett, WA USA at +1 425 356 1765. Sincerely, Carl K. Turk, MSEE Sr. EMC Engineer Intermec Technologies Corp.


Document Created: 2003-07-07 10:53:50
Document Modified: 2003-07-07 10:53:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC