Manual

FCC ID: HN22106

Users Manual

Download: PDF
FCCID_225082

All Rights Reserved *072215-001* © 2001 Intermec Technologies Corp. *072215-001* Everett, WA 98203-9280 MobileLAN™access 2106 6001 36th Avenue West Part No. 072215-001 • Intermec Web Site at www.intermec.com • 21XX Universal Access Point Technical Reference Manual (Part No. 067150) For more information on using the 2106, please see: 50 to 60 Hz 1.0 to 0.5A ~100 to 240V Electrical rating 205 g (0.45 lb) Weight (+32°F to +104°F) Temperature (5.77 in x 3.67 in x 1.39 in) Dimensions 072215-001 0°C to +40°C Operating 14.66 cm x 9.32 cm x 3.53 cm Physical Quick Start Guide Specifications More Information Safety First About the 2106 Caution You must use the appropriate Intermec power supply with this device or equipment damage may occur. Intermec’s 2106 access point is a wireless local area network (LAN) ! product that lets your wireless end devices roam anywhere CAUTION Conseil throughout an enterprise while maintaining a continuous, high-quality Vous devez utiliser la source d’alimentation Intermec adéquate avec cet network connection. appareil sinon vous risquez d’endommager l’équipement. Caution Your 2106 has been certified with an IEEE 802.11a radio. Government regulatory agencies mandate that the antenna not be alterable. Therefore, the access point uses a custom antenna connector. ! Do not attempt to use a different antenna or you may damage the connector and the access point. CAUTION Conseil Les agences responsables de la réglementation gouvernementale exigent que l’antenne ne soit pas modifiable. Par conséquent, le point d’accès est doté d’un connecteur d’antenne personnalisé. Ne pas essayer d’utiliser une antenne différente au risque d’endommager le connecteur et le point d’accès.

MobileLAN™access 2106 Quick Start Guide 1 Defining the LEDs, Ports, and Antenna Positions Connecting, Mounting, and Applying Power Power to the 2106 90° Use this position when the 2106 is After the 2106 boots, this LED remains steadily on. mounted on a Fit the slots on the back of the 2106 Radio over the hooks on the mounting 180° desktop. This LED flashes when a frame is transmitted Use this bracket. position or received on the Radio port. Plug the AC power when the cord into an Wired LAN AC power outlet. 2106 is Screws fasten This LED flashes when a frame is mounted to into mounting transmitted or received on the a wall. surface. Ethernet port. Root/error This LED flashes if this Plug the power Power access point is configured supply into the Supply Use this position as the root. It remains power port of the when storing the 0° Mounting steadily on if an error has 2106. 2106. Power screw (not occurred. provided) port 10/100 BaseT (2 places) Ethernet port Ethernet connection 3 Setting an Initial IP Address 1. Install the MobileLAN access Utility by clicking Install Software from the enclosed CD and A following the instructions that appear on your screen. You can also install the software from Enter the IP address www.mobilelan.intermec.com. of the access point. 2. Reboot the access point and configure parameters A through C in the MobileLAN access B Utility main screen. Enter the MAC address of the access Note: You must configure parameters A through C within 60 seconds after the point (located on the access point has started. In addition, if the access point you are setting is connected bottom of the access wirelessly, you must have an active radio connection. point). Your PC must also be on the same Ethernet segment and subnet as the C access point. Click Set AP. Click Configure AP to use the Web browser interface to continue configuring the access point. Congratulations! Your 2106 is now ready to begin transmitting data packets between your end devices and your wired network.


Document Created: 2001-12-13 09:02:40
Document Modified: 2001-12-13 09:02:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC